CYMA Airsoft

If you're looking for additional mags for your CYMA SVD/SVU you've come to the right place! Constructed from high-density polymer, these magazines hold 300 BBs so you don't have to carry as many to stay in the fight for longer. The mag features cut grooves on the sides as well as the rear of the mag to aid in gripping, with or without gloves.

It is loaded at the top of the mag using the fill window and being a high cap design means that you will need to rotate the wheel to load BBs onto the spring. Make sure it is completely empty after use to avoid wear and tear on the internal mechanisms of the magazine.

Please note that these mags are specifically for CYMA Airsoft AEGs.

If you've damaged the stock of your CYMA CM.103 AK Alfa, here's what you need to fix it! The CYMA Stock for CM.103 AK Alfa AEG is a replacement original parts set for the CYMA Platinum CM.103, a complete stock setup identical to the one pre-installed on the AK Alfa. This stock boasts 6 length of pull adjustment positions, 4 cheek riser positions and side folding functionality but is only compatible with the CYMA Platinum CM.103 AK Alfa AEG. 

A tough constructed SVD platform replica which has had a thorough course of Westernisation in the form of a Sliding Crane Stock, M-LOK Handguard and 20mm Railed Receiver, as well as a standard threaded Outer Barrel w/ Bird Cage Flash Hider.

If you're into retro loadouts and need the most authentic Mk 18 MOD 0 build around, you've just found it! The CYMA CGS Colt Mk 18 MOD 0 10.5" GBBR boasts official licencing from Colt via Cybergun and is a flawless replica of the original Mk 18, even down to the correct M16A1 lower receiver and 10.3-inch barrel setup.

Inside, the Mk 18 MOD 0 is significantly upgraded, packing a steel bolt carrier, steel trigger group parts, steel bolt catch and adjustable hammer; allowing you to tune power to get right within site limits. Also inside is a 6.03mm tightbore inner barrel, giving you an accuracy edge when compared to standard 6.08mm bores. Being based on the TM ZET system internal design, this thing will shoot like a beast, with even heavier recoil than the original TM!

Looking for AK74 magazines for a modern loadout? The 150rnd Mid-cap from CYMA is constructed from polymer with a steel feed spring and baseplate and is patterned after more modern polymer magazines issued with AK74 and AK105 rifles in Russian service and civilian use. For a modern AK74/105 loadout this magazine is perfect. This is a spring loaded mid-cap magazine and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool. The advantage of mid-cap magazines is that they do not rattle, and can be an asset to a sneaky player who wants to move fast and still get the drop on the enemy team. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74, AK105 or AKS74U AEG but will fit and feed in most AK platform AEGs.

A mock Suppressor for Airsoft Guns with a 14mm CCW Thread, which is made with an Alloy Outer Shell and features Foam Inserts inside to slightly deaden the sound of your replica, and a Spring Core to ensure the BB Flight Path stays clear. Perfect for hiding an Inner Barrel Extension or just to make your Replica that extra bit 'tacti-cool'.

If you are after a lightweight, simple suppressor to add to the look of your AEG, rather than dominating it, the Dummy sound suppressor from CYMA may be just what you need!

If you're just getting into Airsoft and don't want to break the bank, our CM.513 M4 SD Beginner Bundle was made with you in mind! This set includes the CYMA Sport CM.513 M4 SD, 4000 Delta Armory 0.25g Diamond BBs, an 8.4V 1600mAh NiMh battery, a NiMh battery charger, a battery safe charging bag and a set of Bolle NESS Safety Glasses.

This is probably the cheapest way to get into Airsoft at the moment, though if you're going to be skirmishing right away, we recommend grabbing either goggles and a lower face mask or a full face mask. Check out the Full Description to learn more about this fantastic value beginner bundle!

If you like to be at the cutting edge of Airsoft development, you're going to need this! The CYMA CM.136 Grach EBB; MOSFET Edition is an extremely innovative new form of Airsoft Electric Pistol which boasts an electric blowback system. Those old hats out there will have their preconceptions around EBB pistols, but make no mistake, this is nothing like the AAA battery-powered EBB pistols of old!

Thanks to its low resistance wiring, pre-installed MOSFET, ball bearing bushings and innovative battery in magazine design, the blowback is incredibly fast, allowing for rapid double taps and near-GBB-like speed. Trust us, when you shoot this thing you will be grinning from ear to ear!

If you have had a gearbox failure and you don't fancy opening it up, the CYMA Complete Version 2 Gearbox w/High Torque Motor & ETU is a pre-upgraded and pre-wired replacement which can be installed with minimal effort and no need to solder or open the gearbox shell. As always, we recommend you have some technical experience before installing a new gearbox, but when it comes to Airsoft upgrades this is about as easy as they get.

This gearbox set is designed for M4/AR-15 AEGs and has the correct nozzle length and selector plate for the task and is also pre-wired to a Deans connector so you can benefit from a lower resistance connector for increased electrical efficiency. Also included with the set is a CYMA high torque Neodymium magnet motor, providing a very snappy trigger response and the power to handle stronger springs than a standard motor.

The icing on the cake is the pre-installed MOSFET/ETU which prevents gearbox lock-up on semi-auto, provides further improvements to the trigger response and a boost to the rate of fire. If your M4 gearbox has issues or you want to freshen up an old M4 with a brand new and pre-upgraded gearbox this set would be a fantastic choice, avoiding the messing around and getting you back to shooting with minimal effort!

The CYMA CM.041G is a new model in the Platinum Series, which offers a solid external build combined with awesome internal components, for an SMG-5 experience like no other. With an internal MOSFET, CNC Steel Gears and more contained within a reinforced Version 2 Gearbox, this is one of the finest SMG-5s available at the moment. Quoted to have a ROF of 25RPS and a very fast trigger response, this is perfect for getting gritty up at the front of the skirmish.

If you need more battery space but want to keep your M4/AR-15 AEG slim on the sides, the CYMA Adjustable Whale Stock is just the thing. This sliding stock is designed for M4/AR-15 buffer tubes and offers a fantastic alternative to common Crane stocks used for rear-wired AEG setups. 

The advantage of the Whale Stock over the Crane is its slim profile, avoiding the side bulges of the Crane stock in favour of a larger stock "toe" for battery storage. This means you can use a much larger battery than would fit in a buffer tube but still enjoy the slim, snag-free profile of more slimline AR stocks. 

The Whale Stock also features a QD sling socket on each side, ready for a QD sling swivel, along with a conventional sling loop at the toe of the stock for hook or strap-style slings. If you want a new look for your buffer tube-equipped AR AEG but refuse to surrender your massive battery, the Whale Stock is what you need!

A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.

A durable 2 point tactical sling, designed for use with Airsoft AK series weapons, from the AK47 to the various designs based on it.

If you plan to get into Airsoft but don't want to overspend on your first replica, our CM.520 AK-47 PMC Beginner Bundle was made with you in mind! This set includes the CYMA Sport CM.520 AK-47 PMC, 4000 Delta Armory 0.25g Diamond BBs, a 9.6V 1600mAh NiMh battery, a NiMh battery charger, a battery safe charging bag and a set of Bolle NESS Safety Glasses.

This is probably the cheapest way to get into Airsoft at the moment, though if you're going to be skirmishing right away, we recommend grabbing either goggles and a lower face mask or a full face mask. Check out the Full Description to learn more about this fantastic value beginner bundle!

For those with a thing for the classic utilitarian style of the AK platform who need a rifle for CQB duties, the AKS-74U has your name on it! The CM.045 High-Speed from CYMA takes the original CM.045's superb externals and drops in a 13:1 steel gearset, high-speed motor, silent piston and cylinder head with a polycarbonate piston with steel teeth to provide a pre-upgraded speed demon of an AK! To sweeten the deal, this AKS-74U comes with real wood handguards and a "bakelite" style magazine, matching the first generation of the AKS-74U and the most common variant seen in the hands of militaries, rebel groups and civilians worldwide.

Wanting to get into Airsoft skirmishing in style? Or maybe you're looking for an iconic sidearm to complete your loadout.

The CM.121 has got all bases covered, with it's lightweight polymer construction and choice of semi or full auto, this electric Desert Eagle lets you rock up to a skirmish with a replica of the classic hand cannon.

Airsoft 6mm BB Gun built by CYMA in China to replicate the American M14 Rifle. The weapon features full Alloy Internals, Receiver and Barrel, with a Polymer Stock and Heat Shield.

If you need a big firepower increase but have limited space, the CYMA Pocket Rocket Stand-Alone Launcher Bundle was put together with you in mind! This pack combines the M052 40mm Pistol Grenade Launcher with 2 x 70rnd S&T 40mm MOSCART grenades, giving you a compact launcher which can be easily carried and 2 chances to shower the enemy with 120 BBs! If you want a run a launcher next skirmish but don't want to carry around another cumbersome platform or mount a massive n00b tube onto your primary, the M052 is the solution you were looking for. 

If you are looking for a cheap base gun for your dream sniper rifle build, this is ideal! The CYMA CM.701 Spring Bolt Action Sniper rifle is based on the popular R700 series of real steel bolt action rifles on the outside and is a clone of the Tokyo Marui VSR-10 Pro on the inside. The outer barrel and receiver are constructed from alloy and the stock is textured high density polymer, matching the metal proportions of the real thing perfectly.

On the inside, CYMA has generously added a 6.03mm tightbore inner barrel into the mix for improvements in accuracy and a slight FPS boost. Also present is a far stronger spring than in the Tokyo Marui version, the result of which is 500 FPS straight out of the box on a 0.2g BB. If you are building a beast of a sniper rifle, this would be a great start, just don't forget you will need an aftermarket 20mm Picatinny rail if you want to mount a scope!

If you have QD sling sockets on your Airsoft rifle it would be rude not to take pure advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds! This QD sling swivel from CYMA fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket and it will automatically lock in place. To disconnect the swivel all you need to do is press the button in the centre which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

If you're preparing for jungle warfare or you're a fan of iconic 20th-century firearms designs, the M16A1 is what you need! The CYMA CM.009B is a near-perfect replica of the real steel M16A1, the refined version of the original M16 which replaced the M14 in US Army and Marine Corps service. Boasting full metal construction and some serious attention to detail, the CM.009B is perfect for reenactment or skirmishers who love a classic with performance to rival the best.

Inside, you will find exactly what you might expect for a CYMA Platinum AEG. The Version 2 gearbox is equipped with a ball bearing spring guide, a polycarbonate piston with a full steel tooth rack, a CNC aluminium silent piston head, a CNC aluminium silent cylinder head and steel gears running on 8mm ball bearing bushings. All these upgraded parts are backed up by a high torque Neodymium magnet motor and the CYMA Platinum MOSFET, providing exceptional performance in every aspect. If you're born to kill and walk the walk, the M16A1 is calling your name.

*Fortunate Son plays quietly in the distance*

A replacement magazine for CYMA Brand VSR Bar 10 Rifles, such as the CM701 Range. The magazine is constructed fully from Polymer with an Alloy Spring. 

If you're just getting into Airsoft and don't want to break the bank, our CM.506 M4A1 CQB SD Beginner Bundle was made with you in mind! This set includes the CYMA Sport CM.506 M4A1 CQB SD, 4000 Delta Armory 0.25g Diamond BBs, an 8.4V 1600mAh NiMh battery, a NiMh battery charger, a battery safe charging bag and a set of Bolle NESS Safety Glasses.

This is probably the cheapest way to get into Airsoft at the moment, though if you're going to be skirmishing right away, we recommend grabbing either goggles and a lower face mask or a full face mask. Check out the Full Description to learn more about this fantastic value beginner bundle!

A Medium Capacity Magazine for the CYMA CM.033 Thompson / M1A1, that holds a total of 60rnds and will feed BBs into your replica until empty, without the annoying rattle of High Cap Magazines. It is filled from the top using a Speedloader to force BBs into place, and is constructed to a tough standard using Polymer. As a final party trick, these Magazines are compatible with Tokyo Marui replicas as well.

Looking for extra magazines for your Dragunov AEG? The CYMA 100rnd Mid-cap will do the trick! This magazine is designed for the CYMA CM.057 series and holds 100 6mm BBs which can be loaded using a speed loader through the fill/feed port at the top of the magazine body. The outer shell of the magazine is constructed from stamped steel to give a realistic look and feel, complete with stamped in strengthening ribs, just like the real SVD/SVU mag.

An Electric Powered SMG-5 replica with a High Cycle Gearbox, which can output 6mm BBs at a muzzle velocity of 325FPS, at a Rate of Fire of over 1000RPM. Built to a very solid standard, this Full Metal replica weighs a surprising amount which makes it feel very realistic in the hands. If you love the SMG-5 shape, but have been put off by the poor performance of previous models, then the CYMA CM.041J High Speed will definitely appeal to you.

If you fancy trying the sniper playstyle and you are into your military platforms, the CYMA CM.702 M24 should suit you perfectly. This spring bolt action sniper rifle is based on the real steel M24 SWS, the primary sniper rifle of the US Army and many Law Enforcement agencies in the US. The M24 marries the classic bolt action sniper rifle styling with enhancements which set it apart from VSR-10-based rifles, including its M700 style "long action" and its adjustable stock.

The CYMA CM.702 is based on the Classic Army CA/M24 internally and boasts a 6.03mm tightbore inner barrel straight out of the box, hitting out at an impressive 500FPS +/- 10% using 0.2g BBs. Packaged with a 14mm CCW male thread adapter and with a bipod lug and scope rail built-in, the CM.702 is ready to be kitted out with whatever you need to complete your mission!

If you like the compact form of the SMG5K but are a 21st-century Airsoft combatant and you require ultra-modern features to complete your mission, the CM.041L was designed with you in mind. This AEG takes the already impressive full metal CM.041K platform and adds an M-LOK handguard, M-LOK 20mm Picatinny hybrid optics rail and an ambidextrous magazine release which can be actuated using the trigger finger from a firing grip for a smooth and fast emergency reload. 

On the inside this AEG has the Platinum high speed upgrade treatment, boasting a high speed motor, high speed gear set and an ETU/MOSFET pre-installed for a spectacular rate of fire and trigger response. Also inside you'll find a tight bore inner barrel for extra accuracy from this compact AEG submachine gun.

The CYMA CM.041H is a new model in the Platinum series, which offers a solid external build combined with awesome internal components, for an SMG-5 experience like no other. With an internal MOSFET, CNC steel gears and more contained within a reinforced Version 2 Gearbox, this is one of the finest SMG-5s available at the moment. Quoted to have a ROF of 25RPS and a very fast trigger response, this is perfect for getting gritty up at the front of the skirmish.