All External Airsoft Parts & Attachments

If you are lucky enough to own one of the scarce Airsoft Lee Enfield Rifles out there, your options just broadened! Introducing the Lee Enfield Steel Scope Mount from Vector Optics, a robustly constructed scope mount designed for the real thing, capable of housing any 1-inch/25mm tube scope to give your Lee Enfield the No.4 MK1 (T) sniper rifle look!

If your MCX is a bit of a pig and you want more agility, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG will do the trick. This handguard is constructed from authentic Carbon Fibre and as such, it tips the scales at only 123g! Though this handguard will help your MCX lose weight, it does so without compromising on attachment interfaces, offering M-LOK slots at 3, 6, 9 and 12 o'clock and additional slots at the lower offset angles.

Another advantage of the Carbon Fibre handguard is its width of approximately 48mm, allowing you to run an integrally suppressed setup and still make use of your M-LOK slots provided your suppressor is slim enough. The set also includes a short section of aluminium 20mm Picatinny rail for M-LOK pre-installed on the rearmost upper M-LOK slot, designed to seamlessly interface with your receiver rail. If you're seeking a speedy look for your MCX without compromising accessory options, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG is what you need!

An incredibly robust mounting system for any 30mm tubed optic. This setup secures onto your 20mm Picatinny rail system with 4 securing bolts to provide a rock solid mount with recoil resistance. 

This Sight Mount from Vortex Optics is crafted from Aluminium and features a One-Piece design, with the exception of the top of the Mount Rings. It is designed for 30mm Optic Tubes and has a Center Height of 40.39mm / 1.59". The Cantilever design of the Mount makes it especially effective for installing Short Dot-style Optics to a flat-top Receiver such as the AR-15. Being made from Aluminium, it is lightweight and effective, but has been so well made it is covered by Vortex's VIP Lifetime Warranty.

Airsoft Masterpiece brings its unparalleled pedigree to Hi-Capa frames to upgrade your pistol and take it from good to next level! The frame is constructed from CNC machined aluminium, which not only looks fantastic but weighs a mere 86g, making your pistol as light as a feather and handle like a dream.

Available in a variety of metallic colours to give your Hi-Capa a sleek, ultra-modern look that's sure to stand out from the crowd. This kit comes included with hammer housing and advanced sear, which allows for smoother cycling and cleaner trigger feel in comparison to the stock Hi-Capa kit.

Installing an Airsoft Masterpiece frame will let your Hi-Capa run as smooth as butter and look even better, while also increasing durability and overall lifespan. Available in a variety of colours.

If you are having trouble reloading your ARCTURUS AK, this should sort it out! The Magwell Spacer for AK-47/74 AEG is designed to fit into the magazine well of any ARCTURUS AK and fill the gap between the HOP-up unit and the front of the magazine well and prevent over-insertion. Unfortunately, this part only works with ARCTURUS AK AEGs and won't fit any other brand as far as we are aware. 

If your ARCTURUS AK uses the MOE-style pistol grip and your base plate has gone walkies, here is the perfect replacement. The Pistol Grip Base Plate for AK-47/74 AEG is only compatible with ARCTURUS AKs which use the MOE-style pistol grip, as seen in the following example: ARCTURUS AK TWS AEG. The base plate is constructed from high density polymer, just like the original.

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

If you are building a custom Hi-capa or 1911 GBB, whether it is for competition shooting or use as a primary pistol for skirmishing, a cocking lever can help speed up your reloads and get you back into the action faster! The CowCow Raw cocking handle is designed for the TM Hi-capa and 1911 GBB pistols and replaces your rear sight with a side-mounted cocking lever which can be installed for use by either left or right-handed users. This cocking handle is compatible with most TM clone GBB Hi-Capas but will only fit 1911s with a rear sight dovetail, not the classic style with the rear sight machined as part of the side.

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.

If you love the slim feel of your KeyMod handguard, but it is a bit sharp, and a bit cold to grip during winter? G&G have the solution! These KeyMod rail cover panels are constructed from high-density polymer and feature a hexagonal texture on their surfaces to provide enhanced control over your KeyMod handguard in poor weather conditions and help prevent accidental cheese grating action from the KeyMod slots! The covers can be mounted quickly, with no need for tools, and are a great way to add comfort to your KeyMod setup or provide a visible and tactile index point to encourage a consistent grip on the rifle. The set includes 4 cover panels of 10cm in length which can also be cut down to cover smaller KeyMod surfaces if needed. Please note, we cannot accept returns on any rail panels which have been cut down.

A Steel constructed Gas Block for LCT branded AKM models, ideal as a replacement to a damaged part.

Adding rails to your AK can be a chore, but users of the superb GHK AK GBBR platform now have one more option! Introducing the 20mm Picatinny Railed Gas Tube for GHK AK GBBR, an aluminium replacement gas tube with a 20mm Picatinny rail built into its upper surface. This rail is great for a forward-mounted optic but has plenty of space for mounting a tactical flashlight and also a PEQ laser if you have your primary sight mounted on a rail further back. If you are looking for a simple way to give your GHK AK GBBR a hint of modernity, this is the perfect piece!

Here we have a stronger, or even replacement lock hook for the KRISS Vector's folding stock. if you want to get ahead of any potential stock lock failure in the future or you're simply the type of rough and ready player that plays hard with your RIF, this would be a worthwhile upgrade for you.

Constructed from duralumin, a strong, lightweight aluminium alloy, which can endure even the most rigorous shooting and movement for performance and peace of mind.

A CNC Aluminium Upper Handguard for select LCT LCK (AK) Airsoft Replicas. It offers stunning precision manufacture and a top 20mm Rail for accessories, and is the perfect companion to any Custom Build / Modified AK.

A 14mm CCW threaded muzzle device, designed to replace your Airsoft guns original flash hider with a sound amplifying compensator. This flash hider is an great to match an aggressive playstyle to a combat CQB primary.

If you are looking for a suppressor for your lil' AK, you have found the right one. The real world PBS-4 is designed for use on the AKS-74U rifle, but has also been seen in use on full length AK74s!

Looking for fast access to the selector switch on your AAP-01? So are we! Thankfully, TTi, being the innovators they are have invented the perfect solution! The Competition Charging Handle with selector switch combines an extended charging handle with an extended rotary selector switch which allows you to change fire modes in a flash without needing to lock the bolt open and break fingernails. This is the aftermarket part the AAP always needed!

If you're running an SSG10 A3 and want it shooting even better than it already does, the Novritsch SSG10 A3 TDC HOP-up Rail Mount will get you there. This part is a unique design from Novritsch, specifically for the A3 variant of the SSG10 and is not compatible with other variants. 

The set includes a 20mm Picatinny rail mount with a TDC HOP-up dial built in and is supplied with the parts you'll need to install it, other than a drill. Be warned, this set requires precision to install and if done wrong, can be catastrophic. As such, we only recommend this to Airsofters experienced with tech work and handy with an electric drill. 

The advantages of TDC HOP-ups are numerous, including providing a stronger HOP-up effect and reducing side-to-side shot deviation. The numerically marked TDC dial also allows you to keep track of your HOP-up settings for different BB weights, a fantastic feature for the serious sniper. The integral 20mm Picatinny rail also allows PEQ lasers, RunCam or Novritsch ClipCam Cheater-Catcher action cameras to be installed in the optimal position. If you want to up the performance of your SSG10 A3 to the maximum, the Novritsch SSG10 A3 TDC HOP-up Rail Mount is what you need!

Are you in need of a replacement slide for your Novritsch non-blowback gas pistol? The Novritsch SSX23 Metal Slide is exactly what you need! It is identical to the stock pistol slide that comes with the SSX23, meaning it is easy to drop in and install as it is designed specifically for the pistol. It is constructed from aluminium, making it strong and lightweight, perfect for quick draws but without the risk of the slide cracking if its dropped. 

The slide has fibre optic iron sights preinstalled on top of it, just like the stock pistol, it saves the hassle of having to find additional aftermarket iron sights! This replacement slide also features optics-ready functionality if you add a Novritsch SSX23 Red Dot Plate V2 or SSX23 Slide rail.

Replace your old damaged slide, or add the Novritsch SSX23 Metal Slide to a different non-blowback gas pistol from brands such as Tokyo Marui, Stti, KJW and ASG to reinvent their design and make your own unique pistol!

If you want to return your AK-74 to its original roots, Battleaxe has the kit for you! The Battleaxe Wooden Conversion For AK-74 is designed to fit most AK-74s such Tokyo Marui, CYMA and G&G. It will fit other brands too but may need modification in order to properly attach it. The set includes a real wood upper handguard, lower handguard and stock beautifully finished to mimic the real thing.

The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. This is great for the stitch counters, and while this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or give it an iconic look, this Wood Conversion Kit is a fantastic option!

If you want that classic look for your AKMSU or maybe your Airsoft replica needs an external repair, Battleaxe has the perfect kit for you! The Battleaxe Wooden Conversion For AKMSU is designed to fit most AKMSUs, however, modification may be required. The set includes a real wood upper handguard, lower handguard and pistol grip beautifully finished to mimic the real thing.

The attention to detail paid by Battleaxe in this kit is evident when you notice the super-realistic laminated plywood construction, just like real Russian AK wood. While this wood may not be as strong as the real Russian stuff, it's ample for Airsoft use and looks far better than cheaper alternatives. Whether your objective is to build a seriously unique AK or complete your RPK support gun build, this Wood Conversion Kit is a fantastic option

A Real Wood handguard for the LCT LCK74 which is made to the original spec and includes a Steel Gas Tube. This is an ideal replacement for a damaged handguard, or to convert another LCT AK74 model.

If you're building out your AK to match the latest real steel builds, the 5KU Lightweight Zco Style Lower Handguard for AK-47/74 is an essential bit of kit. Based on the real steel Zco B30 handguard, this CNC 6061 aluminium lower handguard is designed to fit CYMA, GHK and LCT AK rifles and provides a full length 20mm Picatinny rail at 6 o'clock and a short length at 3 o'clock. 

Additional accessories can be mounted using Zco style rail adapters, and despite being double the length of standard AK handguards, the Lightweight Zco Style Lower Handguard tips the scales at a minuscule 174g, meaning it won't slow you down in-game. If your AK is due for a makeover, give it the modern touch it deserves with the Lightweight Zco Style Lower Handguard for AK-47/74 from 5KU!

If you want to bring your M1928 Thompson AEG up a level in realism, this conversion kit will do it! The  Battleaxe Real Wood Furniture Kit for CM.051 M1928 Thompson comprises a real wood stock, a real wood vertical foregrip/handguard and a real wood pistol grip. 

To fit this conversion kit you will screws and mounts from the original CM.051, the kit only includes the real wood furniture. This kit is designed for the CM.051 Thompson AEG, it may fit other brands but modification will be required. If your CYMA Thompson needs an added dose of authenticity, a real wood kit is the way to go!

If you want to optimise your MCX for CQB, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will get you there. This set includes a 7-inch outer barrel and a detailed replica of the real steel Spear LT SBR handguard, both CNC machined from aluminium with the precision we expect from Airsoft Artisan. 

The Spear LT SBR handguard features M-LOK slots at the 3, 6 and 9 o'clock positions with additional slots at the lower offset angles and a single extra slot on each side, just ahead of the gas block cutout. This matches the handguard of the latest MCX SBR variant, keeping your MCX at the cutting edge of modern platforms. If your MCX needs to lose a few inches and gain a few M-LOK slots, the Airsoft Artisan Spear LT SBR Handguard & Barrel Set for SigAir MCX Virtus will sort it out!

If you own a spring-powered SVD Dragunov, but you're missing the real wood furniture, then this conversion kit should interest you! The Battleaxe SVD Wood Conversion Kit contains a real wood stock and handguard, both of which have been meticulously crafted to ensure a superb and realistic finish. The varnish finish provides a subtle sheen with the wood grain that shows through, faux wood or polymer can never look this good!

Introducing OMG, the ultimate base set for building your very own Speedsoft M4 airsoft replica. This custom-designed receiver and matching handguard set are CNC-cut to perfection and coated with a durable Cerakote finish that comes in a base colour with a contrasting splatter design, making it a true standout on the field.

Crafted with precision and the highest quality materials, OMG is designed to provide an extra level of grip and protection to your airsoft gun. Its unique and eye-catching design is sure to impress even the most seasoned players.

The OMG receiver and handguard set are put together quickly and are of course compatible with most M4 parts, providing maximum versatility and adaptability. This product is perfect for both beginners and advanced airsoft enthusiasts who want to elevate their gameplay to the next level.

OMG is not just an upgrade in aesthetics, but in functionality as well. The Cerakote finish provides an extra layer of protection against wear and tear, while the CNC-milled cuts ensure maximum precision and stability during gameplay.

Don't settle for an ordinary airsoft build when you can have a standout one with the OMG body and handguard kit. Get yours today and dominate the field like never before.