Airsoft Handguards

If your AK is equipped with an ALFA-style lower handguard, this is the upper handguard you need to complete the build! The 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards is CNC machined from aluminium and provides a 20mm Picatinny rail up top, ready for a laser, flashlight or any other 20mm rail-mounted accessory. 

This upper handguard is designed specifically to be paired with the 5KU ALFA lower handguard, mounting via the threaded holes along each side. The set also includes the screws you'll need to bolt your new upper handguard to your ALFA lower handguard. If your ALFA style lower handguard is looking a bit lonely, add the 5KU ALFA 20mm Picatinny Upper Handguard for AK ALFA Handguards to complete the look!

If you're building out your AK to match the latest real steel builds, the 5KU Lightweight Zco Style AK Upper Handguard is an essential bit of kit. Based on the real steel Zco designs, this CNC 6061 aluminium upper handguard is designed to fit AK platforms with ZCO-style lower handguards and provides a 20mm Picatinny rail at 12 o'clock.

The Lightweight Zco Style Upper Handguard tips the scales at a minuscule 110g, meaning it won't slow you down in-game It comes with the steel mounting screws needed for attaching it to your ZCO-style lower. If your AK is due for a makeover, give it the modern touch it deserves with the 5KU Lightweight Zco Style AK Upper Handguard!

If your MPX handguard is looking worse for wear, the SigAir M-LOK Handguard for MPX AEG is the fresh replacement you need! This is an original replacement part for the SigAir/VFC MPX AEG, the standard-length handguard which comes with the original SMG, constructed from CNC machined aluminium with a flawless finish.

M-LOK slots are present at the 3, 6, and 9 o'clock positions along with a short section of 20mm Picatinny rail up top, ready for your choice of accessories. Compatibility-wise, this part is specifically for the SigAir/VFC MPX AEG and probably won't work with other brands. If your beautiful MPX handguard has gained some battle wear and you want to restore it, this handguard will do the trick!

A B10 Style tactical lower AK handguard, designed to allow you to expand the versatility and modularity of your Airsoft AK by providing a 20mm lower and side rail for the addition of Foregrips and Laser / Light modules and any other accessories to suit your playstyle.

If you're running a VZ.58 and want to add optics, lasers, flashlights and grips, the Ares CNC Aluminium 20mm Picatinny Handguard for VZ.58 AEG is what you need. Compatible with the Ares and Delta Armory VZ.58 AEGs, this handguard is made from CNC machined aluminium, giving it flawless machining and perfectly in-spec rails, ready for your mission essentials. 20mm Picatinny rails are present at the 3, 6, 9 & 12 o'clock positions with weight reduction ports in various places to keep your front end light and agile. 

Installation is relatively simple, requiring you to remove your existing handguard via the retention pin and replace it with this in the same way you would when installing your battery. Another perk of adding this RAS handguard is the ability to use an external battery box for more power on tap and easier battery changes. If you're going for the PMC look with your VZ.58, the Ares CNC Aluminium 20mm Picatinny Handguard for VZ.58 AEG is what you need to complete it!

If you want a striking new look for your AK, the 5KU CNC Aluminium MK3 M-LOK Chassis for CYMA AK AEGs will do the trick! This CNC aluminium chassis transforms the AK design, bringing it into line with more modern platforms with M-LOK slots, a lengthy 20mm Picatinny rail up top and a dynamic, angular look. 

Compatibility-wise, this kit is designed for CYMA AK AEGs of the CM.04x and Cm.05x series using the VFC external construction style. It may fit other VFC-style AKs but won't fit AKs based on the TM AK-47 AEG (CM.028, CM.5xx, CM.03x & JG AKs) nor will it fit AKS-74U AEGs. If your AK needs a 21st-century facelift to compete with modern designs, kit it out with the CNC Aluminium MK3 M-LOK Chassis for CYMA AK AEGs from 5KU!

An original replacement for the handguard of an LCT branded LCKM, which is made with Real Wood and Steel, and comes included with the Gas Tube. The part is easy to install, and is made to the same specification as the original part. This is the ideal purchase to replace your LCT LCKM handguard or convert another AKM series model.

If you're looking for a sleek new look for your M4/AR-15 or AR-9 AEG, check this out! The EMG Daniel Defense RIS III 12.5" M-LOK Handguard is officially licenced by Daniel Defense via EMG, boasting licenced trademarks across the design and flawlessly imitating the profile of the real DD RIS III handguard. 

The RIS III handguard is an advancement from the DD RIS II, the handguard seen on the iconic MK18 MOD.1 rifle used by the US Navy SEALs, Delta and all the other big names in the US Armed Forces. The RIS III saves weight by using M-LOK slots on the side and bottom but retains the military style two-piece construction, designed to allow an M203 Grenade Launcher to be mounted with the lower segment removed. 

Up top, we have a full length 20mm Picatinny rail, ready for your lasers, flashlights or other tactical dodads and on the sides and bottom, M-LOK negative space attachment slots, ready for your choice of M-LOK accessories or 20mm Picatinny rail adapters. Like other M4/AR-15 handguards, you'll need an AR-15 Armourers wrench to install this and the set includes the correct barrel nut to mount it. If your AR is a bit on the heavy side and aging rapidly, the EMG Daniel Defense RIS III 12.5" M-LOK Handguard will give it a spritely, energetic feeling and modernise it to the cutting edge!