WELL Airsoft

If you want to ensure victory, you need this. The WELL PRO WE23-Plus Rotary Minigun is part of its "PRO" line of high-end AEGs. This Airsoft Minigun is constructed primarily from high-density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 2800rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tight bores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design for each barrel to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun has the very real potential to change the game, with an incredible fire rate on an 11.1V LiPo battery and a monstrous 2800rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the Minigun life but held off for one reason or another, with the Well Minigun in your hands you will be happy you waited!

If you want to ensure victory, you need this. The WELL PRO WE23-X Rotary Minigun AEG is part of its "PRO" line of high-end AEGs. This Airsoft Minigun is constructed primarily from high-density polymer to keep the weight manageable, with 5 aluminium outer barrels braced with an aluminium ring at the tip. The Minigun feeds from 2800rnd spring-assisted high-capacity magazines which are wound by the internal motor of the Minigun itself, meaning you can spray and pray without worrying about winding every 3 seconds!

On the inside, Well has equipped this Minigun with the parts it needs to truly dominate the battlefield. The 5 inner barrels are all 6.03mm tight bores, granting a small increase in FPS and improved accuracy potential. The 5 HOP-up units are all independently adjustable, making use of a rotary design for each barrel to apply adjustments. The bearings are 8mm, meaning smooth running and low friction, and the Minigun is also compatible with standard AEG HOP-up buckings and inner barrels, just in case its performance isn't already enough for you!

The Well Minigun will dominate the field, with an incredible fire rate on an 11.1V LiPo battery and a giant 2800rnd magazine that winds itself. Miniguns have been around before, but this one is smaller, lighter and far more affordable than its rivals. If you have wanted a taste of the classic "Chainsaw" Minigun Terminator life, the WELL PRO WE23-X Rotary Minigun AEG is exactly what you need!

If you're treating yourself or punishing the enemy team with the WE23-H Rotary Minigun, this is the mag you need if you have a particularly heavy trigger finger! The WELL PRO 2800rnd Magazine For WE23-H Minigun holds an incredible 2800 BBs and winds itself via the internal motor of the WELL PRO Minigun, meaning no need to do anything but pull the trigger! Compatibility-wise, this is strictly for the bigger WELL PRO Minigun replicas, including the WE23-H, WE23-X and WE-23-Plus but sadly isn't compatible with the WE23-S or WE23-L versions (1200BBs is enough!).

The magazine indexes at the rear and rocks in to lock at the front, similarly to an AK or FAL platform but backwards. The magazine release is located on the front of the mag, taking the form of a button. To fill the mag, you will need to remove the rear plate to expose the fill window by squeezing the two tabs on either side of the central "bar" on the rear plate and removing it, together with its internal spring. Remove the entire assembly, pour your BBs into the mag, reinstall the rear plate and you are ready to shoot!

If you've set your sights on a sniper rifle but don't want to break the bank, the WELL PRO MB03AE Bolt Action Sniper Rifle; Upgraded Version is a fantastic option! Based on the original MB03, a close copy of the TM VSR-10, the AE version is upgraded on the inside with a 6.03mm tightbore inner barrel, a steel spring guide, 90-degree piston/trigger sear set and reinforced steel parts throughout the trigger group.

This makes the MB03AE robust enough internally to handle higher power springs, though the pre-installed APS-2 spec mainspring puts out an impressive 412 FPS approximately with 0.2g BBs. Externally, the MB03AE is simple and functional, equipped with a 20mm Picatinny receiver rail for your scope, front and rear sling points and a 20mm Picatinny bipod rail on the bottom, ready to be kitted out sniper rifle style. A spiral-fluted aluminium outer barrel adds a bit of visual interest and style to make it stand out next to the original MB03 and the reprofiled bolt handle ensures you don't scrape your knuckles on your optic when working the bolt.

As far as entry-level sniper rifles go, the MB03AE is a cut above the rest and boasts a fantastic quality polymer stock with a textured finish, indicating fibre reinforcement. If you want to sample Airsoft sniping without getting in too deep financially, the WELL PRO MB03AE Bolt Action Sniper Rifle; Upgraded Version is the perfect thing!

A 22rnd magazine for the Well MB series of spring-powered Airsoft sniper rifles.

If you're running a WELL PRO AK-12 AEG, these are the perfect spare mags! The WELL PRO 180rnd Mid-Cap Magazine for AK-12 AEGs is constructed from high density polymer with a steel feed spring, designed to match the real steel AK-12 5.45x39mm magazine. 

On each side of the grippy, ribbed design we have mock witness windows designed to check rounds remaining in the real steel along with 5.45x39 markings. The steel baseplate is also angled to allow for "mag-podding". Compatibility-wise, this mag should work with most AK-47/74 AEGs but is ideal for WELL PRO WE09 and WE09K AK-12 AEGs. If you need modern mags to go with your cutting-edge AK-12 AEG, load up on these!

If you're planning on doing up your WELL MB02/03 VSR-10 clone, this set will sort your piston group! The WELL Piston Upgrade Set for MB02/03 Sniper Rifle Series includes a CNC aluminium piston and piston head, CNC aluminium ball bearing spring guide and a 500FPS mainspring. Installing this set should get you right to the upper limits of permitted sniper rifle velocity, extending range considerably compared to the stock MB02/03 spring. If you're working on a bargain sniper rifle build with a WELL VSR-10 clone base gun, this set would be perfect!

A bolt action, spring powered sniper rifle with an aggressive and modern aesthetic. This is perfect for the sniper who wants an up-to-date rifle which is easily transported thanks to the folding stock.