WADSN

Flash light cables dangling and snagging your sling? WADSN has got you and your cables covered! This is a rail cover for M-LOK rail system with a textured exterior for that bit of extra friction and grip. But the real use of this rail cover is that it has a number of recesses for which to run cables through, keeping them confined and tidy.

So if you find yourself with loose cables from tactical devices such as battery wiring, pressure switches and other cables, this is what you need to keep them out of the way and minimize snagging.

The WADSN 5 Position Flashlight Mount is a great way to attach your flashlight to your platforms. It mounts to a 20mm RIS/RAS rail, which is the most common rail found on rifles and SMGs. There is a choice of black or dark earth so you can match the mount perfectly to fit the style of your loadout. It features 5 adjustable positions so you can find the perfect setup for your loadout and ensure you dominate any CQB skirmish!

To fit your flashlight you must first loosen the two screws found at the front and back of this mount, once loose, you can slide your torch in. Afterwards, tighten the screws up again and your flashlight and mount are ready to go! The polymer construction means you don't need to worry about having a front-heavy Airsoft gun once fitted. Mount your flashlight using the WADSN 5 Position Flashlight Mount and become a master of close-quarters surprise engagements!

The WADSN 5 Position Flashlight Mount is a great way to attach your flashlight to your platforms. It mounts to a 20mm RIS/RAS rail, which is the most common rail found on rifles and SMGs. There is a choice of black or dark earth so you can match the mount perfectly to fit the style of your loadout. It features 5 adjustable positions so you can find the perfect setup for your loadout and ensure you dominate any CQB skirmish!

To fit your flashlight you must first loosen the two screws found at the front and back of this mount, once loose, you can slide your torch in. Afterwards, tighten the screws up again and your flashlight and mount are ready to go! The polymer construction means you don't need to worry about having a front-heavy Airsoft gun once fitted. Mount your flashlight using the WADSN 5 Position Flashlight Mount and become a master of close-quarters surprise engagements!

If you have the strong desire to use a red dot and magnifier combination, but you also like to wear full face protection or a respirator, we have just what you need! The WADSN G43 Micro Magnifier Mount is compatible with the Ghost 3x Flip to Side Magnifier and replaces the standard flip to side mount with a raised mount designed to co-witness with EO style red dot sights with the PTS Unity Tactical FAST Riser, or T1/2 style red dot sights with the PTS Unity Tactical FAST Micro Mount. This mount can be raised and lowered to deploy, keeping the sides of your rifle slick and making it easier to manoeuvre with less chance of the magnifier snagging on gear, and making the setup more comfortable to sling. 

Lights, lasers, action! The WADSN XC2 Pistol Light & Red Laser is a wonderful pistol attachment, combining the ability to light up a room and then quickly acquire your opponent makes for some quick eliminations when in a CQB arena. With a single AAA battery, you can dazzle your targets and line up perfect shots for hours without having excessive weight and bulk at the front of your Airsoft pistol.

The M322 Scout Tactical Flashlight is a modern LED torch with RM45 offset mount for Picatinny 20 mm rail. This flashlight produces a fantastic 280 lumens from 1x CR123 battery, made possible due to the modern CRE2 LED bulb installed.

An advantage of this torch over similar models is that it comes with 2 switches that can be used in tandem, thank to the dual function tail cap. It features a constant on push button in addition to a lead-attached pressure switch . This means that you don't have to unscrew one to get to the other, like in some other flashlight models.

Another feature unique to this torch is the mount, in that it is an offset mount that allows it to be mounted closer to the handguard for a slick overall platform.

If you have a nice helmet with an NVG mounting bracket we bet you are looking for ways to style it up and have it look a bit less "Airsoft". A great way to give your helmet a touch of realism is by adding a Rhino NVG arm, adding a military look to your lid and filling that empty mounting bracket on the front! 

For a more robust and thick lighting solution, the K-2P is for those of you with more Russian inclined loadouts. Constructed from full alloy, the torch shines at a brilliant 800 lumens and is powered by 2 x CR123A batteries.

The torch is easily attached to your AK rail or 20mm Picatinny system and includes a remote pressure switch, which again can be easily attached to a rail right out of the box. Another inclusion is the offset mount, which allows you to forward mount your torch on the bottom rail to avoid casting a shadow if you are using a suppressor.

The WADSN DBAL Mini is a compact laser aiming module with two fully adjustable lasers combined into a single unit! The DBAL-Mini from WADSN provides both a red visible laser and an IR laser which is only visible under night vision, both of which are zeroed together with common tool-less adjustment dials. This DBAL-Mini is the much sought after aluminium version and boasts more realistic construction than its polymer counterparts. If you own night vision of any kind, this laser is a must!

If you're rocking a Unity Fusion mount, the WADSN Offset Rail for Fusion Mounts should interest you! This CNC aluminium mount is compatible with Unity-style Fusion mounts and provides an offset 20mm Picatinny rail with 5 rail slots, ideal for flashlights and laser aiming modules. This rail mount is only compatible with Fusion style mounts and includes two steel bolts to mount it and the correct Allen key so you don't need to rummage in your toolbox!

If you're looking for a flashlight mount for your SMR-style handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is ideal. This mount is constructed from CNC aluminium with steel mounting hardware and designed to mount SF Scout (M300 and M600) flashlights to Geissele Super Modular Rail (SMR) style attachment slots.

The mount offers several mounting positions for your Scout Light, allowing for 3 different heights so you can get your accessories perfectly positioned. The mount also allows for mounting with a slight forward extension to defeat "suppressor shadow" or mounting at the rear to keep the light away from your muzzle, depending on how you install your Scout Light. This mount is only for standard SF M300 and M600 Scout Lights and won't fit the Scout Light Pro series due to its differing mount.

If you're in search of flashlight mounting solutions for the rare but super-slick SMR handguard, the WADSN SMR Rail Offset Mount for M300/600 Scout Flashlights is what you need!

If you want to shoot while you shoot, we suggest a sight mounted to your sight! The WADSN LPVO Mount Offset Optic Base is designed to mount to the WADSN LPVO 30mm Scope Mount and provide an instantly accessible red dot sight. This mount base is compatible with RMR, T1 and T2 style sights, and may also fit others. The mount is constructed from aluminium with steel screws, and comes with an Allen key and a Torx key so you don't have to rummage in your toolbox! 

The WADSN DBAL Mini is a compact laser aiming module with two lasers in a single unit! Providing both a Red visible laser and an IR laser which is only visible under night vision, the DBAL Mini has you covered whatever the lighting conditions! If you own night vision of any kind, this laser is a must!

If you want to add the elite look to your primary weapon but your local site bans lasers, the WADSN DBAL Mini style Tactical Flashlight was made with you in mind! This device is styled after the real steel DBAL Mini but instead of a laser, the device houses an ultra-bright tactical flashlight inside its front aperture.

The device offers several modes of operation, including low power mode for navigation and stroboscopic mode for distraction and disorientation, and mounts to your primary via a QD mount for 20mm Picatinny rails so you can easily switch between platforms without needing tools. The compact size of this unit makes it perfect for smaller SMGs and rifles, saving you rail space and offering similar functionality to a Scout tactical flashlight but with more modes to choose from and full compatibility with aftermarket 2.5mm pressure switches, dual pressure switches and hot buttons.

If you have rail space to fill and want the purebred operator look for your primary, a PEQ box is a great way to elevate the look of your rifle. This version of the WADSN PEQ15 LA-5C combines this elite look with full functionality, including a rare feature for an Airsoft PEQ; an infrared laser. This laser is only visible under night vision but can be a serious asset if you are fortunate enough to own NODs! 

In addition to the IR laser, this PEQ unit provides a white light and a red aiming laser which can be activated either using the onboard activation button or the included pressure switch. The WADSN PEQ15 LA-5C requires two CR123a cells, either standard disposable cells or rechargeable cells. 

If you have rail space to fill and want the purebred operator look for your primary, a PEQ box is a great way to elevate the look of your rifle. This version of the WADSN PEQ15 LA-5C combines this elite look with full functionality, including a rare feature for an Airsoft PEQ; an infrared laser. This laser is only visible under night vision but can be a serious asset if you are fortunate enough to own NODs! 

In addition to the IR laser, this PEQ unit provides a white light and a red aiming laser which can be activated either using the onboard activation button or the included pressure switch. The WADSN PEQ15 LA-5C requires two CR123a cells, either standard disposable cells or rechargeable cells. 

If you're ready to style up your primary with an elite look, the WADSN PEQ-15 LA5; Red Laser/White Light Version will get you there! Based on the real steel PEQ-15 LA5 laser aiming device, this low-cost alternative from WADSN offers all the functionality you'll need for Airsoft and provides the "Special Forces" look as a bonus.

This version of the WADSN PEQ-15 LA5 operates primarily through the included pressure switch (2.5mm PEQ/DBAL jack), with the activation button on the top of the unit allowing you to scroll between activation modes. Available modes include white light only, red laser only, white light and red laser, and white light stroboscopic. Once you've selected your mode using the activation button, the pressure switch will turn the PEQ on in your chosen mode and turn off again when you let go of the switch.

The set includes a set of realistic PEQ-15 warning stickers and a section of 3M self-adhesive Velcro to mount the included pressure switch and is supplied in a hard polymer storage case with wave foam to keep your PEQ secure when not in use. If you want your primary to look the mutt's nuts, the WADSN PEQ-15 LA5; Red Laser/White Light Version will do just that!

If you're ready to style up your primary with an elite look, the WADSN PEQ-15 LA5; Red Laser/White Light Version will get you there! Based on the real steel PEQ-15 LA5 laser aiming device, this low-cost alternative from WADSN offers all the functionality you'll need for Airsoft and provides the "Special Forces" look as a bonus.

This version of the WADSN PEQ-15 LA5 operates primarily through the included pressure switch (2.5mm PEQ/DBAL jack), with the activation button on the top of the unit allowing you to scroll between activation modes. Available modes include white light only, red laser only, white light and red laser, and white light stroboscopic. Once you've selected your mode using the activation button, the pressure switch will turn the PEQ on in your chosen mode and turn off again when you let go of the switch.

The set includes a set of realistic PEQ-15 warning stickers and a section of 3M self-adhesive Velcro to mount the included pressure switch and is supplied in a hard polymer storage case with wave foam to keep your PEQ secure when not in use. If you want your primary to look the mutt's nuts, the WADSN PEQ-15 LA5; Red Laser/White Light Version will do just that!

Looking for a tactical flashlight for a short-barrelled Airsoft primary? The WADSN V300 would be a fine choice. WADSN's flashlights are steadily growing in popularity thanks to their excellent build quality, stunningly bright CREE LED and previously unheard-of value for money. The V300 is the shorter model of the SF Scout light and is fitted with an integrated 20mm Picatinny rail mount, making it ready to mount on any rifle with 20mm Picatinny rails with nothing else needed. The set includes the pressure switch tail cap and a pressure switch to provide a momentary-on function, with the option to upgrade the mount or switch with any scout light compatible replacements.

Looking for a tactical flashlight for a short-barrelled Airsoft primary? The WADSN V300 would be a fine choice. WADSN's flashlights are steadily growing in popularity thanks to their excellent build quality, stunningly bright CREE LED and previously unheard-of value for money. The V300 is the shorter model of the SF Scout light and is fitted with an integrated 20mm Picatinny rail mount, making it ready to mount on any rifle with 20mm Picatinny rails with nothing else needed. The set includes the pressure switch tail cap and a pressure switch to provide a momentary-on function, with the option to upgrade the mount or switch with any scout light compatible replacements.

For CQB, and for low light situations, there is no greater helping hand in the field than a tactical flashlight. The M640W Scout Light Pro from WADSN is the latest variant of their M6xx scout light series and comes complete with a low profile, angle adjustable mount for 20mm Picatinny rails, an angle adjustable M-LOK/KeyMod mount, and both the push button tail cap and the pressure switch tail cap. This light reportedly pumps out 540 lumens and literally turns night into day with its dazzling brightness, which is only exacerbated by its stroboscopic mode which is intended to distract the enemy and disorient them as you enter the room to clear it!

For CQB, and for low light situations, there is no greater helping hand in the field than a tactical flashlight. The M340A Scout Light Pro from WADSN is the latest variant of their M3xx mini scout light series and comes complete with a low profile, angle adjustable mount for 20mm Picatinny rails, an angle adjustable M-LOK/KeyMod mount, and both the push button tail cap and the pressure switch tail cap. This light reportedly pumps out 540 lumens and literally turns night into day with its dazzling brightness!

If you're on board with the ever-growing trend of mounting tactical flashlights to your pistol, get on board with the WADSN X300 Ultra! This aluminium tactical flashlight is based on the real steel SF X300, a high-end tactical flashlight designed for pistols, short-barreled rifles and SMGs. 

With an integral rail mount, loads of alternative mount options, the highly functional SF rocker switch and a stunningly bright CREE-XPG-R5 L.E.D providing 600 Lumens of sparkly goodness for the eyes of the enemy team, this flashlight is a serious force multiplier!

If you fancy using your pistol as a primary weapon for CQB, a tactical flashlight is a great way to gain an advantage when it comes to clearing rooms and lighting up the enemy in dark areas. The X300 Tactical Pistol Light from WADSN provides a mighty 400 lumens to brighten up the day of the enemy team as you send them back to regen! This flashlight comes with multiple mounting options, including a universal Picatinny and pistol optimised QD mount and a fixed mount for either rail option. 

If you fancy using your pistol as a primary weapon for CQB, a tactical flashlight is a great way to gain an advantage when it comes to clearing rooms and lighting up the enemy in dark areas. The X300 Tactical Pistol Light from WADSN provides a mighty 400 lumens to brighten up the day of the enemy team as you send them back to regen! This flashlight comes with multiple mounting options, including a universal Picatinny and pistol optimised QD mount and a fixed mount for either rail option. 

WADSN are considered by many to be the gold standard in terms of torches and switches with this modbutton being no exception. The pressure switch is used for remote activation of a flashlight and is constructed from rubber for a tactile feel. The housing attaches easily to a Picatinny rail system, however if you would prefer to attach it to an M-LOK system, WADSN have fortunately included an adaptor, giving you that option.

If you are looking for one of the spiciest pistol flashlights we sell, the XH35 from WADSN is up there with its phenomenal 890 lumens output on high power mode! The XH35 is an enhanced pistol flashlight based on the X300 design but with the ability to switch between low and high output mode, and the solid or stroboscopic modes. The XH35 uses the same rocker switch controls as previous X200/300/400 series lights, so there is no need to retrain if you fancy an upgrade!

If you are looking for shiny things to mount to your Airsoft helmet they don't get much shinier than the WADSN HEL-STAR 6! This illumination device is based on the real HEL-STAR 6 which is commonly issued to Western special forces and mounted to helmets to allow for IFF (Identification: Friend or Foe) through night vision devices and from Aircraft.

The HEL-STAR 6 mounts to the rear of any helmet thanks to its velcro backing and the included self-adhesive velcro strip, allowing it to be fitted and removed in seconds as the mission requires. Inside the HEL-STAR 6 is an array of coloured, white and IR LEDs, meaning you can use the device for team identification, distress signalling and even run it in IR mode if you and your team have night vision at your disposal. At around 1/10th of the price of the real one, if you can even get a real one, the WADSN HEL-STAR 6 is the ideal addition to any Airsoft helmet, especially for the Milsim inclined!

If you have a pile of leaky mags, now is the time to fix them up! The WADSN Gas Magazine O-ring Repair Set includes 10 O-rings of 7 different sizes, designed to replace the O-rings of the knocker valve and fill valve in most Airsoft gas magazines. The set is supplied in a clear polymer organiser case to keep everything neat and includes a set of polymer installation tweezers to make installation without damaging the O-rings considerably easier. If you have a lot of leaky mags gathering dust, this set is the key to giving them a new lease of life!

If you are running a PEQ15 or DBAL laser unit together with an SF style scout light, we have to say that's a nice setup! With the ever-growing popularity of running accessorised Airsoft rifles, WADSN has introduced a neat enhancement to combine the controls of a PEQ15 or DBAL with a 2.5mm jack and an SF scout style tactical flashlight with the standard SF plug. No longer do you have to have three hands to proficiently control your accessories, the Tactical Augmented Dual Function Tape Switch put the controls of both an SF scout style tactical flashlight and PEQ15 or DBAL (2.5mm jack) right at your fingertips, wherever you choose to place them. This switch can be mounted to 20mm Picatinny rails with the pre-installed mount, or to M-LOK or KeyMod rails with the included mounting apparatus and the Picatinny mount removed.