Specna Arms Airsoft

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This suppressor is the 40mm diameter version, available in either 100mm or 150mm lengths; ideal for rifle and SMG builds.

This version of Specna's silencer is the 40mm "Brrrrt" version, marked with "BRRRRRRRRT" on the outside in stylised text with a wider diameter than the standard. This suppressor is ideal for A10 Warthog fans, minigun fans or anyone whose primary is appropriately fast!

If you want the biggest stick battery you can squeeze into your M4/AR-15 buffer tube, this is probably it! The Specna Arms 7.4v 2000mAh 15/30c LiPo Stick Battery is pre-wired to a mini-Tamiya battery connector and designed for slim and long battery compartments. The battery is a 7.4V LiPo with a capacity of 2000mAh, continuous discharge rate of 15C and maximum discharge rate of 30C.

The battery measures 12.3 x 1.6 x 1.8cm approximately and should fit into most M4/AR-15 buffer tubes, though some with less space inside may require that you leave the stock in an extended position. The wire between the cell group and connector is approximately 10cm, giving you plenty of flexibility to fit the battery where you need it. As always, measure up before you buy!

If you want to run your Specna Arms PDW stock-equipped rifle all day, this is what you will need. With a considerable amount more room than the original battery tube, this tube can take up to a 7.4v 1450mAh LiPo battery.

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!

The Specna Arms SA-E10 PDW EDGE™ is an AR Platform Airsoft Electric Gun featuring the ORION Gearbox, crammed full of goodies that make this an excellent choice straight out of the box. This version of the rifle comes with a PDW Style Stock that helps keep overall length down, and makes it ideal for all locations and arenas.

The Specna Arms SA-E10 PDW EDGE™ is an AR Platform Airsoft Electric Gun featuring the ORION Gearbox, crammed full of goodies that make this an excellent choice straight out of the box. This version of the rifle comes with a PDW Style Stock that helps keep overall length down, and makes it ideal for all locations and arenas.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a mid cap variant, meaning that it holds a medium amount and is filled at the top using a speed loader. Unlike high-cap mags there is no 'battle rattle' so if you're a more sneaky type of player mid-cap mags are for you.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

BBs are the staple of skirmishing; with no BBs, there would be no Airsoft! That's why it's important for them to be as affordable and high quality as possible. The Specna Arms EDGE ULTRA BBs are an excellent choice for outdoor skirmishing. At a weight of 0.28g per BB, they stay precise even at longer ranges, making them perfect for AEGs with upgraded Hop-Up units. The tolerance of these BBs is just 0.01mm, meaning that every shot feels incredibly consistent and accurate. Coming in a 1KG bag, you are sure to have enough BBs to take down all of the enemies in your next skirmish! 

The Specna Arms EDGE ULTRA BBs are ideal for those desiring high quality and accuracy, whilst still maintaining a low, affordable price. Enjoy your skirmishing without the unnecessary stress of how much you'll need to spend on topping up your BBs!

The Specna Arms SA-F20 FLEX™ Compact Carbine AEG; FALCON EFCS Edition is a lightweight and compact rife, it is constructed from high-density, scratch-resistant polymer. This AEG is also equipped with the FALCON EFCS MOSFET which has a programmable ETU that offers multiple different firing modes, this is an amazing feature for the relatively low price and gives newer players a chance to experiment with different firing modes. Additionally, the preinstalled MOSFET will protect your rifle from short circuits and burnouts.

If you're a fan of staying light on your feet, sneaking up on the enemies and not getting tired arms from a long day of skirmishing, then the Specna Arms SA-F20 FLEX™ Compact Carbine AEG; FALCON EFCS Edition is perfect for you and your covert or reckless playstyle!

The Specna Arms SA-F20 FLEX™ Compact Carbine AEG; FALCON EFCS Edition is a lightweight and compact rife, it is constructed from high-density, scratch-resistant polymer. This AEG is also equipped with the FALCON EFCS MOSFET which has a programmable ETU that offers multiple different firing modes, this is an amazing feature for the relatively low price and gives newer players a chance to experiment with different firing modes. Additionally, the preinstalled MOSFET will protect your rifle from short circuits and burnouts.

If you're a fan of staying light on your feet, sneaking up on the enemies and not getting tired arms from a long day of skirmishing, then the Specna Arms SA-F20 FLEX™ Compact Carbine AEG; FALCON EFCS Edition is perfect for you and your covert or reckless playstyle!

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

Specna's iron sights are simple, no frills back up sights constructed from high density polymer, helping keep the weight of your build down for more important, heavy things, like huge freakin' scopes!

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!

Looking for the old school "issued" look for your M4 or M16 Airsoft AEG? The M4/M16 Style Carry Handle/Rear Iron Sight from Specna Arms will give you the look you need, with some simple and utilitarian functionality, and very little to go wrong in the heat of a firefight. This carry handle is constructed from alloy with steel mounting screws and a steel mounting bracket, to ensure it can take the weight of your rifle no matter how much stuff you have bolted on!

If you have ever felt like you messed up buying a rifle with a 14mm clockwise threaded barrel, weep no more! This 14mm CW to 14mm CCW thread adapter attaches to any 14mm CW male thread and provides a 14mm CCW male thread for the addition of more common CCW threaded accessories!

Are you looking for an excellent out-of-the-box base rifle for your DMR build? The Specna Arms SA-P26 PRIME™ Daniel Defense® MK18 12.5" M4/AR-15 AEG is the AEG you need! This premium assault rifle has had its internals completely revamped to make it a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you want to make a DMR build but without needing the plethora of upgrades before it's skirmish-ready then the  Specna Arms SA-P26 PRIME™ should be the AEG on your wishlist!

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

If you need bigger mags on your AK, the Specna Arms S-Mag High-cap is a great shout. The S-Mag is constructed from high-density polymer with unique SA texture on the outside to add traction for improved wet weather handling. This is a wheel-wound high-cap magazine, meaning it holds an absolutely epic 430 BBs and needs to be wound periodically via the winding wheel on the baseplate.

To load the S-Mag High-cap, simply open the fill port on the top of the magazine and pour your BBs in. Once filled, wind the wheel on the baseplate 5-10 times, load it into your AK and get busy. This magazine is ideal for the Specna Arms J-series but should also fit in most other AK AEGs. 

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

This is for a pack of 5 magazines for the player who sees nonstop action!

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

This is for a pack of 5 magazines for the player who sees nonstop action!

The Spenca CORE™ V2 Gearbox Shell provides 8mm bushings, radiused cylinder windows to help prevent cracks, and quick release spring functionality. Perfect for starting your ultimate gearbox build! 

CQB skirmishers, this one is definitely for you! The Specna Arms SA-F21 FLEX™ Carbine AEG; FALCON EFCS Edition is an extremely lightweight platform, weighing in at less than 2kg, this AEG will not slow you down during your battles. The high-density polymer is incredibly durable and scratch-resistant. The SA-F21 FLEX™ is also equipped with the FALCON EFCS MOSFET, which has a programmable ETU that offers multiple different firing modes, this is an amazing feature for the relatively low price and gives newer players a chance to experiment with different firing modes. The preinstalled MOSFET will also protect your rifle from short circuits and burnouts.

If you're a fan of staying stealthy, being light on your feet and giving the enemies a scare by sneaking up on them with the added benefit of not getting tired arms after a long day of skirmishing, then the Specna Arms SA-F21 FLEX™ Compact Carbine AEG; FALCON EFCS Edition is perfect for you!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

If your team use M4s but you prefer the AR36 this will suit your needs! This replacement magazine well will allow you to share magazines with your team and use smaller and more prevalent M4 magazine pouches.

If you want to play Airsoft with a realistic full metal platform or have you had your eyes on an iconic MK18 platform, either way, the Specna Arms SA-E19 EDGE™ Daniel Defense® MK18 M4/AR-15 AEG; Kestrel Basic ETU should suit you! This AEG is based on the standard issue rifle of the US Navy SEALs but with some modern external enhancements mimicking high-end civilian tactical setups.

Being an AEG of the EDGE™ line, this Specna Arms MK18 is great straight out of the box, boasting 18:1 ratio steel gears, a Kestrel Basic ETU, a quick change spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness.

With more Picatinny rails than you'll ever need, a unique modern receiver design and the large battery space of an M4 Crane stock, the SA-E19 EDGE™ is perfect for skirmishers who want the realistic feel of full metal and the performance to back it up!

Based off the standard M4A1 used by the US Army and Marines this rifle is a high quality replica built by Specna Arms with high levels of detail, finish, with a top quality wobble free design. If you're looking for a high quality full metal rifle for a beginner weapon you're going to be hard pressed to find anything else in this price range of this quality.

If you have a magazine which leaks from the fill valve, or your mag is a bit old and the valve has taken a hammering over the years, a replacement valve is the way to go. This Specna Arms valve replaces the fill valve in your magazine with a nice fresh one, complete with an O-ring to ensure there are no leaks! This valve will require a valve key to install.