Guns Featuring MLOK Rail

If you have a taste for realism, recoil and a new challenge in game, the Noveske N4 GBBR from EMG will give you what you need. This Gas Blowback Rifle boasts full metal construction, licenced Noveske trademarks and internals based on the best of the best when it comes to GBBRs; the Tokyo Marui ZET system.

Not for the faint of heart or those who like to fight easy, a GBBR provides unparalleled realism with its realistic manual of arms involving loading the first round using the charging handle, counting your shots carefully due to low-cap magazines and taking your reloading skills to the next level thanks to its functional bolt lock. While a GBBR is a challenge to operate compared to a simple AEG, there is nothing that can touch a GBBR when it comes to its immersive firing experience and unparalleled realism.

Licenced by Noveske through EMG and manufactured by Double Eagle, the N4 has absolutely gorgeous externals, with a thick, hard-wearing finish that looks phenomenal and showcases the crisply engraved Noveske trademarks which tie the whole piece together. The N4 GBBR also has a full steel trigger group pre-installed, saving you money down the line on essential longevity upgrades required to keep a GBBR running in the long term. If you have been holding out on a GBBR, waiting for something to pop up that has the right balance of affordability, efficiency and aftermarket support, now is the time!

We’ve all been waiting for this one! The VORSK VMP-2 GBBR is finally available! If you pre-ordered, your VMP-2 will be dispatched immediately with the exception of those requiring our Two-tone service which will immediately be processed for dispatch ASAP.

In case you haven’t heard, the VMP-2 is VORSKs second long-gun platform designed as a multi-role carbine available in 3 unique variants. This, the VMP-2M is the assaulter option, offering semi-automatic and fully automatic fire modes and furniture designed for agility and adaptability. The handguard is bristling with M-LOK negative space attachment slots with a full-length 20mm Picatinny rail on top, ready for your choice of mission essential accessories.

The VMP-2 is compatible with standard VMP-1/MP9 magazines and makes use of a unique chassis system with QD sling sockets on each side, compatibility with M4/AR-15 GBBR pistol grips and the prolific M4/AR-15 buffer tube at the rear, offering full compatibility with aftermarket AR-15 stocks.

The HOP-up unit is a unique design with an external TDC adjuster, ideal for convenient mid-game setting changes to make the most of changing conditions, not to mention being an inherently accurate design. The HOP-up bucking and inner barrel are also VSR-10 spec, giving you almost unlimited options when it comes to tuning performance to meet your needs.

Our VMP-2 batch has now landed and is ready for immediate dispatch! Those who’ve already made their mind up, get your order in now to make sure you get one of the first VMP-2 platforms available worldwide!

Whether you are a Novritsch fan or simply appreciate a performance-oriented AR platform you must be dying to get your hands on the SSR4! This M4/AR-15 platform Airsoft gun has been designed by Novritsch's team in Austria to provide the accuracy, range, and rate of fire to dominate an Airsoft skirmish if you have the skills to back it up!

This version of the SSR4 is the full metal version, constructed with a CNC Aluminium handguard and alloy receiver to provide the realistic feel and weight that veteran skirmishers will appreciate, backed up by game-winning performance downrange.

Inside, you will find a 6.03mm tightbore inner barrel, rotary HOP-up unit, reinforced version 2 gearbox with CNC steel gears, a steel quick change spring guide and of course, the pre-installed MOSFET trigger system which allows for programmable fire modes, adjustable pre-cocking and also provides a boost in ROF and trigger response. If you are looking for an Airsoft AEG platform to help you reach your peak of Airsoft gameplay, this could be the one!

The CYMA CM.041G is a new model in the Platinum Series, which offers a solid external build combined with awesome internal components, for an SMG-5 experience like no other. With an internal MOSFET, CNC Steel Gears and more contained within a reinforced Version 2 Gearbox, this is one of the finest SMG-5s available at the moment. Quoted to have a ROF of 25RPS and a very fast trigger response, this is perfect for getting gritty up at the front of the skirmish.

If you are a sniper who is fed up with the wind ruining their kills or you have a sneaky playstyle and want to push your effective range up into DMR territory, the Novritsch SSX303 is calling your name! This MK23-based DMR carbine is built like a tank and shoots like a laser beam thanks to its high FPS setup with an extended 6.03mm tightbore inner barrel, TDC HOP-up unit with a tool-less external adjuster and highly efficient non-blowback action.

The chassis of the SSX303 is constructed from CNC machined aluminium, and as we would expect for a modern platform, is bristling with M-LOK negative space attachment slots with a 36cm long 20mm Picatinny top rail, ready for your choice of optical sight. The controls of the SSX303 are all ambidextrous, making it a fantastic alternative to a bolt action sniper rifle for left-handed shooters, and the stock mounts to a standard M4/AR-15 buffer tube, opening up about a million options when it comes to mounting aftermarket stocks.

Whether you are a stealthy woodland warrior or you fancy giving the DMR playstyle a go, you'll have a hard time finding anything with a better blend of low weight, long range and near silent muzzle report than the SSX303 Stealth DMR Gas Non-Blowback Rifle!

If you're looking for something a cut above the rest, the Specna Arms SA-P27 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you're after a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P27 PRIME™ should be the AEG on your wishlist.

If you're looking for something a cut above the rest, the Specna Arms SA-P27 PRIME™ is exactly that. This AEG has changed the game when it comes to out-of-the-box performance. The internals have been completely revamped to make this AEG a force to be reckoned with. Some of these alterations include a powerful brushless motor, CNC 16:1 ratio steel gears running on 8mm J-CAGE bushings and a reinforced tappet plate for reliable feeding.

The Prime™ is Specna's newest line of AEGs, they have taken their traditional AEG silhouettes and stripped away the internals to make room for a new set of improved parts to increase performance, consistency and rate of fire. The highlight of this AEG is its ASTER II MOSFET, it substantially improves trigger response and offers programmable firing modes. It also reduces the general wear on internal components and increases their reliability and performance during gameplay.

If you're after a rifle that doesn't require a plethora of upgrades before you deem it skirmish-ready then the SA-P27 PRIME™ should be the AEG on your wishlist.

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

The lightning-fast Delta Armory FREYA™ series is back and better than ever in its Gen.2 form! Boasting all of the best bits of the original FREYA™ including dynamic, weight-reduced skeletonised externals and the advanced EAGLE™ programmable MOSFET/ETU system, Delta has gone all the way with the FREYA™ Gen.2 and fitted it with the best internals from the ETU series, resulting in the most well-equipped Delta Armory platform yet released!

Inside the version 2 gearbox, we are treated to CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The presence of the EAGLE MOSFET with its semi-auto lock function, a quick change spring system and a high torque motor make the R15 FREYA™ Gen.2 14" a fine base gun for a DMR build but equally useful for outdoor skirmishes straight out of the box. If you're looking for a uniquely styled M4/AR-15 AEG which handles like a dream and is very well equipped internally, the Delta Armory R15 FREYA™ Gen.2 14" M-LOK M4/AR-15 AEG is one of the best options out there!

If you've got your ear to the ground on the latest Airsoft releases, you can't have missed the LevAR 15" from G&G! This innovative platform is powered by green gas, making use of G&G M4/AR-15 AEG upper receivers providing almost unlimited customisation options and the chance to make this lever action "Space Cowboy" rifle truly yours. 

The LevAR 15" is confirmed to be compatible with G&G M4 AEG upper receivers, allowing you to configure it how you want, from a long sniper rifle-style setup to a compact and agile scout rifle perfect for mobile marksmen. Powered by green gas using an internal gas reservoir, the LevAR 15" also boasts a 1913/20mm Picatinny stock interface, meaning the stock can be swapped or removed entirely. Now we have a sample LevAR-15 in our hands, we can confirm that the 1913 interface is set at an angle, so aftermarket 1913 stocks will fit but look funky. We expect G&G will release a range of specific stocks for this interface so stay tuned for more intel!

Our batch of LevAR 15" Gas Powered Lever Action Rifles is due later this year, so sign up for an email stock alert and get in before the rush if you want to be one of the first in the country running this beast. If you need more information before you make the call, check out the full description for all the nitty gritty details!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day. 

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.  

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day. 

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.  

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day. 

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.  

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Buckingwas added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Buckingwas added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you're in search of a lightweight and high performance platform with the AR-9 aesthetic, the G&G ARP9 2.0 Enhanced Combat Machine AEG can't have escaped your scrutiny! This is the second generation of G&G's superb ARP9 platform, boasting several internal refinements for even more performance and an external overhaul including the G&G GOS-V9 PDW stock and a new CNC aluminium M-LOK handguard.

We think this is the best-looking ARP9 variant yet but also offers more attachment interfaces thanks to its longer handguard and even better results downrange than its still respectable older sibling. Internal improvements include a new generation of ETU and MOSFET made more efficient and compact than ever before, a further reinforced gearbox shell, a redesigned bevel gear to reduce heat build-up and a double O-ring nozzle to enhance air seal qualities. Also present is G&G's latest rotary HOP-up unit, bringing the ARP9 into line with modern Airsoft releases, offering improved setting retention and finer adjustment increments.

The original ARP9 was famously the winner of the Airsoft Players Choice Awards for best AEG several years on the trot and in our assessment, the second generation is even better. If you're after a lightning-fast CQB platform which handles like a dream and gives the enemy team nightmares, the G&G ARP9 2.0 Enhanced Combat Machine AEG is what you need!

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

In case you haven’t heard, the VMP-2 is VORSKs second long-gun platform designed as a multi-role carbine available in 3 unique variants. This, the VMP-2MD is the “recce rifle” variant, locked to semi-automatic only and tuned to DMR FPS levels. The MD is rocking the same handguard and sliding adjustable stock as the M version with a cheek riser added along with an extended barrel, making it ideal for mobile marksmen playstyles and long-range outdoor warfare!

The VMP-2 is compatible with standard VMP-1/MP9 magazines and makes use of a unique chassis system with QD sling sockets on each side, compatibility with M4/AR-15 GBBR pistol grips and the prolific M4/AR-15 buffer tube at the rear, offering full compatibility with aftermarket AR-15 stocks.

The HOP-up unit is a unique design with an external TDC adjuster, ideal for convenient mid-game setting changes to make the most of changing conditions, not to mention being an inherently accurate design. The HOP-up bucking and inner barrel are also VSR-10 spec, giving you almost unlimited options when it comes to tuning performance to meet your needs.

Our VMP-2 batch has now landed and is ready for immediate dispatch! Those who’ve already made their mind up, get your order in now to make sure you get one of the first VMP-2 platforms available worldwide!

The CYMA CM.041H is a new model in the Platinum series, which offers a solid external build combined with awesome internal components, for an SMG-5 experience like no other. With an internal MOSFET, CNC steel gears and more contained within a reinforced Version 2 Gearbox, this is one of the finest SMG-5s available at the moment. Quoted to have a ROF of 25RPS and a very fast trigger response, this is perfect for getting gritty up at the front of the skirmish.

If you like the compact form of the SMG5K but are a 21st-century Airsoft combatant and you require ultra-modern features to complete your mission, the CM.041L was designed with you in mind. This AEG takes the already impressive full metal CM.041K platform and adds an M-LOK handguard, M-LOK 20mm Picatinny hybrid optics rail and an ambidextrous magazine release which can be actuated using the trigger finger from a firing grip for a smooth and fast emergency reload. 

On the inside this AEG has the Platinum high speed upgrade treatment, boasting a high speed motor, high speed gear set and an ETU/MOSFET pre-installed for a spectacular rate of fire and trigger response. Also inside you'll find a tight bore inner barrel for extra accuracy from this compact AEG submachine gun.

CQB skirmishers, this one is definitely for you! The Specna Arms SA-F21 FLEX™ Carbine AEG; FALCON EFCS Edition is an extremely lightweight platform, weighing in at less than 2kg, this AEG will not slow you down during your battles. The high-density polymer is incredibly durable and scratch-resistant. The SA-F21 FLEX™ is also equipped with the FALCON EFCS MOSFET, which has a programmable ETU that offers multiple different firing modes, this is an amazing feature for the relatively low price and gives newer players a chance to experiment with different firing modes. The preinstalled MOSFET will also protect your rifle from short circuits and burnouts.

If you're a fan of staying stealthy, being light on your feet and giving the enemies a scare by sneaking up on them with the added benefit of not getting tired arms after a long day of skirmishing, then the Specna Arms SA-F21 FLEX™ Compact Carbine AEG; FALCON EFCS Edition is perfect for you!

If you need a platform for dealing with foes at range, the DA-A15 ALPHA™ is the right tool for the job. This Delta Armory AEG boasts full metal construction and a selection of pre-upgraded internals, including a 6.03mm tightbore inner barrel, rotary HOP-up unit and an upgraded piston, delayer chip and tappet plate from SHS.

On the outside, we are treated to an M-LOK handguard styled after the popular Strike rail system, a unique Delta Armory receiver featuring a built-in enlarged trigger guard and magazine well gripping texture along with the simply awesome Delta Armory battery stock, to name but a few of the slick ergonomic features of the platform. If you need a longer platform for a DMR build or woodland warfare, the DA-A15 is a sure hit if you are into modern ARs!

If you're looking for a full metal AR platform for a mix of outdoors and CQB skirmishes, the Delta Armory DA-A14-ETU ALPHA™ 10" M-LOK M4/AR-15 AEG is a fantastic choice. Dressed to impress with a unique modernised receiver, M-LOK handguard and pre-installed angled foregrip, the DA-A14-ETU is as kitted out externally as it is internally!

Inside, the DA-A14-ETU boasts a pre-installed programmable ETU/MOSFET with burst mode and binary trigger firemode options, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. These parts join the standard Delta Armory pre-upgraded parts from SHS, resulting in an internal feature set to rival the best in its price range.

The most recent addition to the Delta Armory internal formula is the Berserker Flat HOP-up bucking, made by HOP-up masters, Psionics of Italy. While it may be a relatively short platform ideal for the fast-moving player, the Berserker bucking means the DA-A14-ETU can easily contend with the big boys at long range!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series. 

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1. 

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!