Novritsch Accessories

The Novritsch 24rnd Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, Y&P, Stti, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas and can be refilled at the bottom, the BBs can be inserted into the magazine by pulling down the spring tab and filling up the BB chamber with a speedloader. This mag comes with a 1-stage valve and has a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 24rnd Magazine for SSX23/MK23 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

The Novritsch 100rnd Magazine for P90/SSR90 Gen.2 AEGs is more transparent than other magazines allowing you to constantly monitor your remaining BBs so you don't get ambushed whilst having an empty magazine! Novritsch has also slightly tweaked this magazine design so it fits better into P90/SSR90 Gen.2 AEGs, giving you smoother reloads even in the heat of the moment, when the adrenaline is pumping! It is made from a strong polymer and sturdy steel feed spring making it a mighty fine magazine that will last you a long time. This magazine can hold approximately 100 BBs so you have plenty of shots available if you opt for semi-auto firing, but if you prefer full spraying, this large magazine will surely have enough BBs in it so you can hit your target, or at least we would hope so...

Do you often find yourself in disbelief when heinous skirmishers won't take their hits? Or maybe you are looking for an effortless way to compile a highlight reel mid-battle? The Novritsch ClipCam Cheater-Catcher is the best solution for capturing quick 16-second clips at the press of a single button. It captures all videos at a resolution of 1080 by 1080 and 60 frames per second; this is perfect for social media posts to show off your skills, or expose those dishonourable Airsoft skirmishers who won't confirm they have been hit.

This low-profile camera can be mounted onto a Picatinny rail and will sit lower than most red dot sights meaning that your view won't be obstructed. Captured clips can be accessed and downloaded by plugging the camera into a PC or laptop, or with the Novritsch: Product Companion mobile app. The camera itself has 30GB of storage so you have plenty of room to capture all the highlights from your day of skirmishing!

If you love your SSX23 and would hate to see it out of action, grab the Novritsch Nozzle Assembly Set for SSX23 NBB and keep it in the parts stash just in case! This nozzle assembly is a replacement original part designed for the SSX23 N-BB pistol from Novritsch and is constructed from a high-density polymer. Nozzles are a known failure point for pistols and as reliable as the SSX23 is, it's always wise to have spare parts so you can keep your beast of a pistol up and running!

If you're looking for an excellent medium to long-range optic with adjustable zoom and focus to handle targets that may get a little too close for comfort, then the Novritsch 1-4x Variable Scope “LPVO” is exactly what you require. This magnified riflescope is an LPVO (Low Power Variable Optic), meaning it offers variable magnification from 1x up to 4x, ideal for medium-range engagements mounted on an assault rifle, DMR or sniper rifle.

This Novritsch LPVO offers windage and elevation adjustment via a pair of tactile adjustable turrets, along with a choice of red or green reticle illumination in 5 brightness settings. There is no CR2032 included with this scope. It also has a fast focus dial around the eyepiece with a throw lever for easy adjustments with gloves so you can get a clear view at various engagement ranges. With a Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube, this LPVO is ready to mount straight out of the box!

This scope has been tested with real steel firearms by the Novritsch team and it proved it was more than "just an airsoft scope". Being able to withstand the force and kickback of some real steel beasts. The video attached shows its capabilities

The Novritsch SSG10 Full Top Rail Gen.2 allows you to extend your top rail so you can mount any optic you desire atop your Novritsch SSG10. It is a 20mm Picatinny rail so will comfortably harbour most of the common scopes and sights found on the market. The rail screws into the top of your SSG10 receiver with the 4 screws provided, this keeps it securely attached to your sniper rifle, even with the chunkiest of scopes attached!

Make your SSG10 uniquely yours with the Novritsch SSG10 Full Top Rail Gen.2 and mount the perfect scope onto this rail to accommodate your sniping needs.

If you are rocking the Novritsch SSP5 GBB pistol that thing isn't complete without a red dot sight! The Novritsch Premium Red Dot Plate for SSP5 GBB pistol is designed specifically for the SSP5 series and is constructed from CNC machined aluminium with an anodised finish. This red dot plate uses the Docter red dot sight footprint and should fit any micro red dot sight with the Docter footprint, including the Novritsch Red Dot Sight Premium V3. If you want to take pure advantage of the borderline insane performance of the SSP5 at long range, this plate is the key!

If you are treating yourself to the shiny new SSP18 GBB from Novritsch you will need some mags! The 24rnd Green Gas Magazine V1 is designed for the Novritsch SSP18 and will also fit most EU series GBB pistols. The magazine body is constructed from alloy with a polymer follower, polymer feed lips, a polymer baseplate, a steel feed spring and brass valves.

The fill valve is located on the base of the magazine and as with all Airsoft gas mags, the mag needs to be inverted to be filled with gas. Loading BBs can be done through the feed lips at the top, or by dragging the follower on the front down and loading through the widened channel at the bottom. A speed loader makes this much easier but isn't required. Being the V1 version, this mag is not compatible with the Novritsch CNC baseplates and uses a single-stage valve.

If you are running the SSP18 you will need a few of these to keep up with that fearsome full auto firemode!

If you need more mags for your Novritsch SSG96, you've found them! The Novritsch 22rnd Magazine for SSG96 Sniper Rifle is constructed from translucent polymer so you can keep track of your round count and is compatible with both the Novritsch SSG96 MK1 and MK2. The mag can be loaded through the feed lips either by hand or with a speed loader and holds 22 BBs; more than enough for such an accurate platform!

If you need mags for your Novritsch SSQ22 GBBR you have found them! These magazines are styled after real steel 10/22 25-round magazines and are constructed from high density polymer with alloy internals and a steel feed spring. The outer shell of the magazine boasts textured panels to make the mag easier to grip during a speedy reload, and each magazine holds 36 BBs.

Loading the magazine can be done in one of two ways; Either pull the follower on the front of the magazine down to the bottom and load with a speed loader through the loading port on the front, or use a GBB adapter with your speed loader and load through the feed lips at the top of the mag. The gas fill valve is located on the bottom of the mag, and as with all gas magazines, the mag needs to be inverted in order to fill it. These mags work well with the Novritsch SSQ22 but unfortunately are not compatible with the ASG/KJ Works KC-02. If you are planning on running Novritsch's sporty new 10/22 style carbine, a few of these is a must!

If you're looking to make the most of your SSP19's full-auto fire mode, one of these will do it! The Novritsch 49rnd Extended Gas Magazine for SSP18 GBB is constructed from alloy and an extended design with a 49rnd capacity. This green gas magazine can be filled through the fill valve on the baseplate by inverting it, as you would with any other GBB mag. 

BBs are loaded either through the feed lips at the top or by holding the follower on the front down and filling through the widened section of the follower channel at the front. While it may be heavier and bigger than a standard mag, this is really the only way to do that rapid full auto mode justice!

If you want to keep your beast of a Novritsch pistol shooting perfectly in cold weather, you'll need one of these! The Novritsch 31rnd CO2 Magazine for SSP1/SSP5 GBB Pistol is constructed from alloy with a polymer baseplate and is compatible with both the SSP1 and SSP5 GBB pistols.

The mag is loaded either through the feed lips or the follower channel when the follower is held down using a speed loader or loading tool. If you're new to CO2, we recommend giving our CO2 guide a quick read so you can stay abreast of maintenance and CO2-specific safety issues.

This mag uses 12g unthreaded CO2 capsules, one of which needs to be installed inside the magazine shell. To access the CO2 compartment, simply press the small button on the bottom and slide the baseplate off. Underneath, you will find the CO2 plug which can be removed with the included Allen key or a flat tool if you don't have the Allen key handy. Install your CO2 capsule inside, tighten the plug down until you hear the capsule pierce and replace the baseplate; you are now good to go!

Whether your HOP-up rubber is worn out or you are seeking an upgrade, the Novritsch HOP-up Bucking for SSP1/SSP5 GBB pistol is one to keep an eye on. This HOP-up bucking is a big reason that Novritsch pistols have such incredible range, and being a VSR/GBB style HOP-up rubber, this should be compatible with most TM-based GBB pistol designs as well as the VSR-10 sniper rifle series.

If you want your SSG24 to be more sneaky or you want to light the enemy up with a tracer unit, this thread adapter will do the trick! The 14mm CCW Suppressor Thread Adapter for SSG24 is constructed from CNC machined aluminium and replaces the front barrel cap on the Novritsch SSG24, providing 14mm CCW male barrel threads. These are the most common barrel threads used on Airsoft rifles, so with this adapter installed you have all the options in the world when it comes to customising your SSG24 and making it truly yours.

If you want to save some weight on your AR36 or Novritsch SSR63 and give it a whole new look, you have found what you need! The Novritsch Minimal 20mm Picatinny Rail Kit for SSR63/AR36 AEG is constructed from alloy with steel mounting bolts and is compatible with the full range of Novritsch SSR63 AEGs as well as most AR36 AEG and GBBR platforms. The part is manufactured by Double Bell, includes built-in flip-up iron sights and is based on the real steel KAC design. 

The set provides a 20mm Picatinny top rail measuring approximately 10cm in length, enough for most red dot sights and smaller magnified scopes while minimising excess material to keep the weight low. The built-in flip-up iron sights are fully adjustable, with a single rear aperture which can be raised and lowered by turning the drum just below the aperture and adjusted left and right via the drum on the right side. If your AR36 needs a style up or you want to lean in to the light and tight design philosophy of the Novritsch SSR63, this kit is the perfect upgrade!

If you have the Novritsch SSR63 A2 or A3 and it is a bit long for your playstyle, this is what you need to shorten her up a bit! The Novritsch Short Conversion Kit for SSR63 A2/A3 AEG includes a "C" length outer barrel with 14mm CCW male threads at the tip, a 6.03mm tightbore inner barrel and a CNC aluminium M-LOK handguard with 20mm Picatinny rail sections in key locations. 

This set includes everything you need to transform your SSR63 A2 or A3 into the short configuration, shaving a few precious inches off the barrel so you can clear corners more effectively and have better mobility in CQB scenarios. Whether you want to hot-swap your SSR63 A2/A3 for the odd CQB game or you prefer a shorter primary to maximise aggression, this kit should suit you perfectly!

If you want your SSP18 to stand out, the Novritsch SSP18 Compensator; 14mm CCW is what you need. This CNC Aluminium compensator boasts two ports at the top and swept-back fluting on each side, giving it a speedy look ideally suited to the SSP18 aesthetic. This comp is designed specifically for the SSP18 but mounts to its 14mm CCW male threaded barrel, meaning it can be used on other platforms but compatibility is not guaranteed. 

With numerous colour options available to suit any taste, the Novritsch SSP18 Compensator is a great way to customise your SSP18 and make it truly yours. Paired with Novritsch's magwell, outer barrel and other colourful CNC aluminium parts, you can turn your SSP18 into a unique beast and even use the comp to hide an extended 130mm inner barrel for more accuracy and muzzle energy. 

If you're moving away from standard scope rings in favour of something more modern and lightweight, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is ideal. This single-piece scope mount follows modern trends, combining the front and rear scope ring for a more robust combination setup which is easier to mount as a bonus. 

Its aluminium construction keeps the weight of the One-Piece 20mm Picatinny Scope Mount to a minuscule 138 grams and its raised optical centreline means your scope sits slightly higher than usual, ideal for those who like to keep their knashers protected behind a face mask while skirmishing. Each ring also includes a single slot of 20mm Picatinny rail, ideal for micro red dot sights, Runcam/action cameras or whatever other equipment you need to complete the mission at hand!

Compatibility-wise, this mount should fit any LPVO or Rifle Scope with a 25mm monotube but will not fit 30mm monotube optics. If you want a more advanced scope mounting solution for your primary or have trouble looking through your scope due to your face-pro choice, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is what you need!

If you're a talented skirmisher with skills to showcase, the Novritsch GoPro Adapter for 20mm Picatinny Rails should suit you perfectly. This CNC aluminium mount attaches to any 20mm Picatinny rail and provides a mount for GoPro-style action cameras with the socket mount. Please note, the barrel-mounted rail shown in the images is for demonstration purposes only and is not included with the set. 

The mount can be fitted to position the camera on the left or right side of your primary and only minimally affects the weight distribution and balance thanks to its lightweight aluminium build. If you have epic Airsoft moments to record for the ages, the Novritsch GoPro Adapter for 20mm Picatinny Rails is what you need!

If you love your SSP2 and would hate to see it out of action, grab the Novritsch Nozzle Set for SSP2 GBB and keep it in the parts stash just in case! This nozzle is a replacement original part designed for the SSP2 Hi-Capa GBB pistol from Novritsch and is constructed from high density polymer. Nozzles are a known failure point for GBB pistols and as reliable as the SSP2 is, it's always wise to have spare parts so you can keep your beast of a 'Capa up and running!

If you love your SSP18 and want to keep it shooting in the long term, having a Novritsch SSP18 Complete Nozzle can't hurt! This polymer loading nozzle is compatible with Novritsch SSP18 GBB pistols and is a fantastic part to have lying around to pre-empt potential disaster, especially if you use full auto a lot. If you're very attached to your SSP18 and don't ever want it to sit around awaiting spare parts, grab this to put your mind at ease!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you've put a strong spring in your SSG10 and want to cock it easily, the Novritsch Enlarged Bolt Handle for SSG10 is what you need! Constructed from aluminium with a deeply textured surface, this bolt handle is designed to provide extra purchase for easier cocking and faster follow-up shots.

The Enlarged Bolt Handle is also shaped to provide clearance for any optical sight you may have mounted, avoiding smashing your knuckles on your scope when working in a hurry. Whether you need more grip on your SSG10 for wet weather skirmishes or faster follow up shots the Novritsch Enlarged Bolt Handle is ideal for the job!

This is a set of spare O-rings for Novritsch SP1, SSP2 & SSP5 V2 magazines. They are the perfect replacement parts for magazines that are leaking gas. Become a maintenance master and fix your leaky mags, rather than spending extra on new ones. Should your magazine spring a leak, a spare set of O-Rings is always handy. 

Fix your Novritsch magazines so they're skirmish-ready, or have some spare parts should the worst scenario occur. The Novritsch SSP2 O-Ring Set gives your magazines a second chance at fighting!

If you love your Novritsch pistols and want to keep them shooting pristine, keeping a spare Novritsch SSP1/SSP5 Nozzle can't hurt! This polymer loading nozzle is compatible with Novritsch SSP1/SSP5 GBB pistols and is a fantastic part to have lying around just in case a catastrophe strikes, especially if you often find yourself relying on your sidearm. If you're very attached to your Novritsch SSP1/SSP5 pistols and don't ever want them to sit around awaiting spare parts, grab this to put your mind at ease and get your Novritsch pistols back on the battlefield!

The Novritsch SSG10 Drill Fluted Cylinder is a fantastic upgrade for your SSG10 sniper rifle. This gives your Novritsch sniper a wonderfully unique look, and additionally, it also reduces the contact surface when pulling the bolt, which results in a smoother and easier pull. It's the perfect balance of aesthetic and functionality improvement!

You will need to disassemble your SSG10 rifle and then reassemble it to install this part. This sounds tricky and intricate, but luckily for us, Novritsch has kindly provided a video showing you how to disassemble your SSG10, install the Drill Fluted Cylinder, and then reassemble the SSG10. Installation video attached. We only recommend upgrade parts like this for those with experience or the patience and willingness to learn.

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

If you're running the incredibly swift SSR9 AEG from Novritsch, you'll need loads of these to keep it fed! The Novritsch 120rnd Magazine for SSR9 AEG is constructed from high density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The slim design of these magazines allows you to carry plenty, and it goes without saying, you'll need a lot of these mags to keep up with the SSR9 DSG's insane rate of fire!