Airsoft HPA

If you plan to run your Tokyo Marui Hi-Capa GBB on HPA, the Army Armament HPA Adapter for M4/AR-15 AEG Magazines; GBB Hi-Capa will considerably improve your firepower!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. It allows standard M4/AR-15 AEG mags to be used along with a High-Pressure Air (HPA) power source, so you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your Capa!

The set includes an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will take your gameplay to the next level!

If you're looking for the very smallest of LiPo batteries, you've found it. Measuring 4x1.3x2cm, this battery can be used to power the FCU in the V12 engine, in addition to other HPA systems with a mini-JST type connector.

The battery has a voltage of 7.4v, a capacity of 250mAh and a discharge rate of 20C and features a cable length of roughly 10.5cm

If you run HPA and you need a convenient and modern way to affix your air tank to your rig, this is what you need! The Novritsch MOLLE HPA Tank Pouch is sized to fit 0.8L and 1L air tanks (90mm maximum diameter) and can be tightened down for a perfect fit via the 3 external straps and bungee cord at the top and bottom.

As it comes, the MOLLE HPA Tank Pouch mounts vertically but it can also be mounted horizontally using MALICE clips or Novritsch's own MOLLE strip clips. Available in a wide variety of spicy colour options, this air tank pouch can be a great way to add a stylish touch to your loadout with a practical and functional design as a bonus!

If you run HPA and you need a convenient and modern way to affix your air tank to your rig, this is what you need! The Novritsch MOLLE HPA Tank Pouch is sized to fit 0.8L and 1L air tanks (90mm maximum diameter) and can be tightened down for a perfect fit via the 3 external straps and bungee cord at the top and bottom.

As it comes, the MOLLE HPA Tank Pouch mounts vertically but it can also be mounted horizontally using MALICE clips or Novritsch's own MOLLE strip clips. Available in a wide variety of spicy colour options, this air tank pouch can be a great way to add a stylish touch to your loadout with a practical and functional design as a bonus!

If you're planning on running your GBBR through winter or fancy mag dumping like it's going out of fashion without the dreaded "cooldown" effect, the Army Armament HPA P30 Adapter for M4/AR-15 AEG Magazines; CGS/MWS System is what you need! 

A collaborative project between Army Armament and T8 Systems, this HPA adapter is designed for the Tokyo Marui M4/AR-15 ZET System and the CYMA CGS M4/AR-15 GBBR series, allowing standard AEG mags to be used along with a High Pressure Air (HPA) power source. The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. 

The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're already running HPA you probably have all the bits to make this work already and experience shoulder-thumping recoil through the frosty months!

If you're done with AEGs and want to revamp your build for HPA, the GATE PULSAR D Dual Solenoid HPA Engine is a fantastic option. Designed for Version 2 AEG gearboxes, the PULSAR D is designed to work with a GATE TITAN™ II V2 ETU (HPA Version), giving you unlimited advanced programming options along with the bob on consistency, top-tier accuracy, killer rate of fire and wealth of tuning opportunities HPA builds are known to provide.

The set includes the complete engine but will require a V2 gearbox shell, V2 trigger and TITAN™ II ETU HPA Version to complete the build. When compared to the original and more affordable PULSAR S, the PULSAR D offers a higher FPS range, universal compatibility with AEG nozzles, less precision required in the assembly of the build and impressively high air efficiency, using only 0.7 PSI per shot on average at 90 PSI with a 0.8L air tank.

The PULSAR D also has the edge in accuracy and versatility over the simpler single solenoid PULSAR S, being suitable for any build objective, from CQB monster to DMR dominator. As with all internal upgrades, we only recommend this engine to those who are confident working on AEG and HPA internals, but if you're ready for the PULSAR D, you're sure to be impressed!

If you plan to run your Hi-Capa GBB pistol with high pressure air, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is essential. This magazine adapter allows your Hi-Capa GBB to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you want to eliminate cooldown, improve rapid-fire performance and increase your mag capacity, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is what you need!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're getting geared up to run HPA, the Novritsch HPA Regulator & Line; US Spec should be useful! This set includes a regulator and air line with the US Spec fitting, ideal for use with Novritsch HPA adapters or other US Spec adapters. The set does not include a bottle, so make sure you grab one if you don't already have one!

The Novritsch HPA Regulator & Line; US Spec boasts a two-piece design, allowing easy access for maintenance and includes only two O-rings inside to minimise potential failure points, increasing long-term reliability. The integral tournament lock allows you to lock off your regulator to keep the pressure constant and within site limits using a standard zip tie, keeping site marshalls happy. If this is your first foray into HPA, we recommend reading the "Special Instructions" section of the full product description before ordering. 

This line and reg set is compatible with both standard and SLP (super low pressure) HPA tanks but only works with US Spec adapters and bottles, not EU spec. If you're about to grab yourself a Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa or EU-Series, this is the line and reg you need!

If you want a magazine for every season and you're running a CGS or TM ZET system GBBR, get one of these! The CYMA 30rnd Green Gas/HPA Gas Magazine for CGS/MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and has a green gas fill valve and a HPA line attachment point on the rear of the STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

To use this magazine with HPA lines, instead of swapping the whole magazine when out of ammo, you can purchase separate quick-detach BB tubes. By pulling the tab rearwards on the bottom of the magazine you can remove the internal BB tube and then insert another one. This means that you can carry way more BBs without the hassle of large magazines occupying your rigs!

Whether you feel like using gas or HPA, this magazine has you covered for all occasions and is the perfect all-year-round gas magazine, just make sure to get some separate BB tubes if you plan on using HPA!

If you're planning to run your Tokyo Marui Hi-Capa GBB on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; TM Hi-Capa GBB will improve your firepower considerably!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. Allowing standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your 'Capa!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your Tokyo Marui Hi-Capa GBB on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; TM Hi-Capa GBB will improve your firepower considerably!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. Allowing standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your 'Capa!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you need an affordable way to keep water on your person in the field, the 8Fields Tactical MOLLE 1L Water/HPA Bottle Carrier is ideal. This water bottle pouch is constructed from 1000D Nylon and features MOLLE webbing and velcro on the front and sides, allowing for patches and additional MOLLE pouches to be mounted where you see fit. The pouch itself mounts to MOLLE webbing, making it easy to mount wherever you need it, whether on a plate carrier, chest rig, belt or backpack. 

While it is designed for 1L water bottles, this pouch is also well-sized to fit 48ci HPA bottles (measuring 14 x 10cm approx) and is closed at the top using dual zips. You may even be able to poke your regulator and line through the zip without modification, though it may fit better with a hole carefully cut in the top. If you're in need of a more compact hydration solution or an affordable HPA bottle pouch, the MOLLE 1L Water/HPA Bottle Carrier from 8Fields Tactical is a fine choice!

If you need an affordable way to keep water on your person in the field, the 8Fields Tactical MOLLE 1L Water/HPA Bottle Carrier is ideal. This water bottle pouch is constructed from 1000D Nylon and features MOLLE webbing and velcro on the front and sides, allowing for patches and additional MOLLE pouches to be mounted where you see fit. The pouch itself mounts to MOLLE webbing, making it easy to mount wherever you need it, whether on a plate carrier, chest rig, belt or backpack. 

While it is designed for 1L water bottles, this pouch is also well-sized to fit 48ci HPA bottles (measuring 14 x 10cm approx) and is closed at the top using dual zips. You may even be able to poke your regulator and line through the zip without modification, though it may fit better with a hole carefully cut in the top. If you're in need of a more compact hydration solution or an affordable HPA bottle pouch, the MOLLE 1L Water/HPA Bottle Carrier from 8Fields Tactical is a fine choice!

If you need an affordable way to keep water on your person in the field, the 8Fields Tactical MOLLE 1L Water/HPA Bottle Carrier is ideal. This water bottle pouch is constructed from 1000D Nylon and features MOLLE webbing and velcro on the front and sides, allowing for patches and additional MOLLE pouches to be mounted where you see fit. The pouch itself mounts to MOLLE webbing, making it easy to mount wherever you need it, whether on a plate carrier, chest rig, belt or backpack. 

While it is designed for 1L water bottles, this pouch is also well-sized to fit 48ci HPA bottles (measuring 14 x 10cm approx) and is closed at the top using dual zips. You may even be able to poke your regulator and line through the zip without modification, though it may fit better with a hole carefully cut in the top. If you're in need of a more compact hydration solution or an affordable HPA bottle pouch, the MOLLE 1L Water/HPA Bottle Carrier from 8Fields Tactical is a fine choice!

If you need an affordable way to keep water on your person in the field, the 8Fields Tactical MOLLE 1L Water/HPA Bottle Carrier is ideal. This water bottle pouch is constructed from 1000D Nylon and features MOLLE webbing and velcro on the front and sides, allowing for patches and additional MOLLE pouches to be mounted where you see fit. The pouch itself mounts to MOLLE webbing, making it easy to mount wherever you need it, whether on a plate carrier, chest rig, belt or backpack. 

While it is designed for 1L water bottles, this pouch is also well-sized to fit 48ci HPA bottles (measuring 14 x 10cm approx) and is closed at the top using dual zips. You may even be able to poke your regulator and line through the zip without modification, though it may fit better with a hole carefully cut in the top. If you're in need of a more compact hydration solution or an affordable HPA bottle pouch, the MOLLE 1L Water/HPA Bottle Carrier from 8Fields Tactical is a fine choice!

If you run HPA and you need a convenient and modern way to affix your air tank to your rig, this is what you need! The Novritsch MOLLE HPA Tank Pouch is sized to fit 0.8L and 1L air tanks (90mm maximum diameter) and can be tightened down for a perfect fit via the 3 external straps and bungee cord at the top and bottom.

As it comes, the MOLLE HPA Tank Pouch mounts vertically but it can also be mounted horizontally using MALICE clips or Novritsch's own MOLLE strip clips. Available in a wide variety of spicy colour options, this air tank pouch can be a great way to add a stylish touch to your loadout with a practical and functional design as a bonus!

If you run HPA and you need a convenient and modern way to affix your air tank to your rig, this is what you need! The Novritsch MOLLE HPA Tank Pouch is sized to fit 0.8L and 1L air tanks (90mm maximum diameter) and can be tightened down for a perfect fit via the 3 external straps and bungee cord at the top and bottom.

As it comes, the MOLLE HPA Tank Pouch mounts vertically but it can also be mounted horizontally using MALICE clips or Novritsch's own MOLLE strip clips. Available in a wide variety of spicy colour options, this air tank pouch can be a great way to add a stylish touch to your loadout with a practical and functional design as a bonus!

If you run HPA and you need a convenient and modern way to affix your air tank to your rig, this is what you need! The Novritsch MOLLE HPA Tank Pouch is sized to fit 0.8L and 1L air tanks (90mm maximum diameter) and can be tightened down for a perfect fit via the 3 external straps and bungee cord at the top and bottom.

As it comes, the MOLLE HPA Tank Pouch mounts vertically but it can also be mounted horizontally using MALICE clips or Novritsch's own MOLLE strip clips. Available in a wide variety of spicy colour options, this air tank pouch can be a great way to add a stylish touch to your loadout with a practical and functional design as a bonus!

If you run HPA and you need a convenient and modern way to affix your air tank to your rig, this is what you need! The Novritsch MOLLE HPA Tank Pouch is sized to fit 0.8L and 1L air tanks (90mm maximum diameter) and can be tightened down for a perfect fit via the 3 external straps and bungee cord at the top and bottom.

As it comes, the MOLLE HPA Tank Pouch mounts vertically but it can also be mounted horizontally using MALICE clips or Novritsch's own MOLLE strip clips. Available in a wide variety of spicy colour options, this air tank pouch can be a great way to add a stylish touch to your loadout with a practical and functional design as a bonus!

If you run HPA and you need a convenient and modern way to affix your air tank to your rig, this is what you need! The Novritsch MOLLE HPA Tank Pouch is sized to fit 0.8L and 1L air tanks (90mm maximum diameter) and can be tightened down for a perfect fit via the 3 external straps and bungee cord at the top and bottom.

As it comes, the MOLLE HPA Tank Pouch mounts vertically but it can also be mounted horizontally using MALICE clips or Novritsch's own MOLLE strip clips. Available in a wide variety of spicy colour options, this air tank pouch can be a great way to add a stylish touch to your loadout with a practical and functional design as a bonus!

If you run HPA and you need a convenient and modern way to affix your air tank to your rig, this is what you need! The Novritsch MOLLE HPA Tank Pouch is sized to fit 0.8L and 1L air tanks (90mm maximum diameter) and can be tightened down for a perfect fit via the 3 external straps and bungee cord at the top and bottom.

As it comes, the MOLLE HPA Tank Pouch mounts vertically but it can also be mounted horizontally using MALICE clips or Novritsch's own MOLLE strip clips. Available in a wide variety of spicy colour options, this air tank pouch can be a great way to add a stylish touch to your loadout with a practical and functional design as a bonus!

If you want to run your SSP18 or EU-series GBB on HPA, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 is the easiest way to do it. This adapter is pre-built using a zinc alloy magazine body and fibre-reinforced nylon polymer adapter and is outfitted for US Spec HPA lines by default. This adapter is designed to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you're running your SSP18 in the Novritsch Minimalist Carbine Kit or as a primary, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 will give you the rapid-fire performance and capacity you need to stay ahead!

Monk Customs' game-changing M4-adapter is back, with an aluminium vengeance!

The ultimate Ultra Light M4 Adapter — with a pre-installed Ultra Light Hi-Capa magazine, the Monk Customs M-Adapter is your go-to choice if you need a light-weight and durable M4 adapter for your Hi-Capa.

The Aluminium M-Adapter comes in different colours, completing your total setup's look.

Monk Customs' game-changing M4-adapter is back, with an aluminium vengeance!

The ultimate Ultra Light M4 Adapter — with a pre-installed Ultra Light Hi-Capa magazine, the Monk Customs M-Adapter is your go-to choice if you need a light-weight and durable M4 adapter for your Hi-Capa.

The Aluminium M-Adapter comes in different colours, completing your total setup's look.

Monk Customs' game-changing M4-adapter is back, with an aluminium vengeance!

The ultimate Ultra Light M4 Adapter — with a pre-installed Ultra Light Hi-Capa magazine, the Monk Customs M-Adapter is your go-to choice if you need a light-weight and durable M4 adapter for your Hi-Capa.

The Aluminium M-Adapter comes in different colours, completing your total setup's look.

Monk Customs' game-changing M4-adapter is back, with an aluminium vengeance!

The ultimate Ultra Light M4 Adapter — with a pre-installed Ultra Light Hi-Capa magazine, the Monk Customs M-Adapter is your go-to choice if you need a light-weight and durable M4 adapter for your Hi-Capa.

The Aluminium M-Adapter comes in different colours, completing your total setup's look.

Monk Customs' game-changing M4-adapter is back, with an aluminium vengeance!

The ultimate Ultra Light M4 Adapter — with a pre-installed Ultra Light Hi-Capa magazine, the Monk Customs M-Adapter is your go-to choice if you need a light-weight and durable M4 adapter for your Hi-Capa.

The Aluminium M-Adapter comes in different colours, completing your total setup's look.