G&G Armament Airsoft

If you are having HOP-up troubles with your M4 platforms, don't worry, G&G has just the thing for you! This HOP-up chamber is a replacement part and comes with the necessary pieces for installation, but does not include a HOP-up rubber or a nub. The main chamber is made from high-density polymer and is compatible with all M4-style AEGs which have V2 Gearboxes. It's a reliable and high-quality replacement part that will help your AEG shoot like brand new again!

The rotary adjustment dial is the latest and greatest way of setting your rifle's HOP. It is much more accurate and provides finer increments of adjustments when compared to previous gear-style HOP-up adjustments.

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. It is constructed from polymer with a rubberised butt plate. The stock features a rear battery compartment which is accessible when the butt plate is removed which allows the fitting of a Nunchuck configuration battery, such as this.

The stock features rear loopholes for two-point sling setups, as well as a rubberised butt plate for enhanced hold when shouldering your weapon. To fit the stock the pin which is below the adjustment handle should be pulled fully out, then the stock will simply slide onto the buffer tube, this can be done either by Hand or with a pair of Pliers. The stock is a great replacement part for M4 Airsoft rifle project builds or simply as a replacement for an already damaged part.

If you need a replacement for your G&G MOSFET or want the latest version with its more compact design, the G&G Armament ETU/MOSFET for G2 Gearbox; Rear Wired is ideal. This set is pre-wired for relatively easy installation and is the latest G&G MOSFET 4.0 with its more compact form, saving you space in your battery compartment.

Installing this set gives your AEG the option of programming 3-round burst instead of full auto, great for those who keep running out of ammo due to a heavy trigger finger! Other features include low-voltage cutoff and cycle completion, ensuring both your gearbox and battery are kept healthy in the long term. Worth noting is that this set will require 11.1V LiPos to be used and if you're installing this in a non-G&G G2 AEG you will need to carry out modifications to ensure your setup does not pre-engage (AOE correction at the least).

These 0.28g BB's created by G&G (Guay Guay), who create a range of high quality BB guns and related products, with these BBs being some of the highest quality in the sport. 

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic. 

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic. 

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic. 

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic. 

A spare high cap magazine designed for the G&G ARP9 only.

An Airsoft Medium Capacity Magazine that is ideal for the Airsofter wanting to inject a little more realism into their Skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

An Airsoft medium capacity magazine that is ideal for the Airsofter wanting to inject a little more realism into their skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG magazine compatible Airsoft guns.

A 1KG bag containing approximately 5000 high quality competition grade 0.20g Airsoft BBs, constructed from polymer, and are polished to provide a smoother aerodynamically enhanced external surface. 

A spare Mid cap magazine designed for the G&G ARP9 9mm Receiver styled Airsoft M4 replica. Shaped Similar to an extended G-series magazine but hold 60 rounds filled via a a speed loader on the top of the mag. once filled you are ready to go with no winding needed.

If you're in search of a lightweight and high performance platform with the AR-9 aesthetic, the G&G ARP9 2.0 Enhanced Combat Machine AEG can't have escaped your scrutiny! This is the second generation of G&G's superb ARP9 platform, boasting several internal refinements for even more performance and an external overhaul including the G&G GOS-V9 PDW stock and a new CNC aluminium M-LOK handguard.

We think this is the best-looking ARP9 variant yet but also offers more attachment interfaces thanks to its longer handguard and even better results downrange than its still respectable older sibling. Internal improvements include a new generation of ETU and MOSFET made more efficient and compact than ever before, a further reinforced gearbox shell, a redesigned bevel gear to reduce heat build-up and a double O-ring nozzle to enhance air seal qualities. Also present is G&G's latest rotary HOP-up unit, bringing the ARP9 into line with modern Airsoft releases, offering improved setting retention and finer adjustment increments.

The original ARP9 was famously the winner of the Airsoft Players Choice Awards for best AEG several years on the trot and in our assessment, the second generation is even better. If you're after a lightning-fast CQB platform which handles like a dream and gives the enemy team nightmares, the G&G ARP9 2.0 Enhanced Combat Machine AEG is what you need!

A replica M26 hand grenade with a hollow middle, allowing you to fill it with roughly 600 BBs.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

Incredibly light weight and reliable Airsoft RIF. An excellent beginner Airsoft rifle but also very favourable by experienced Airsofters due to its out of the box performance being so good in a low price bracket.

This is the G&G metal Airsoft medium capacity magazine that is ideal for the Airsofter wanting to experience a little more realism into their Skirmishing style. The mag features full metal construction with a medium 125rnd capacity for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

A replica MK2 hand grenade with a hollow middle, allowing you to fill it with roughly 600 BBs.

This is an Airsoft GR16 M4/15/16 magazine from G&G. This high capacity mag can hold an impressive 450 rounds to lay down some serious fire on you opponents. The steel construction is both lightweight and tough with a classic STANAG design.

An Airsoft 6mm BB Gun, based on the AR Platform of Rifles, with a unique Hand guard and Stock System to make it stand out from the crowd. 

A Polymer magazine for the ARP9 Airsoft Electric Gun, which holds a total of 60rnds and feeds BBs into the gun via a spring, meaning they feed completely until empty. Not only this, but they have actual dummy rounds (not just stickers) inside to look just like the real deal.

An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from Alloy, featuring an alloy Receiver, Stock Tube, Hand Guard and Barrel, with a Polymer Pistol Grip, Magazine and Stock. 

An Airsoft 6mm BB Gun, based on the M4, this is the latest version of the G&G Combat Machine. The weapon is constructed almost entirely from Alloy, featuring an alloy Receiver, Stock Tube, Hand Guard and Barrel, with a Polymer Pistol Grip, Magazine and Stock. 

A high end SMG 45 at a great price. An absolute pleasure to hold in your hands and stands out by a mile from cheaper models by far.

An Alloy constructed spare or replacement magazine for the G&G GTP9 Gas Blowback Pistol and SMC9 Gas Blowback Carbine. It holds a total of 50rnds and has a huge gas reservoir to ensure it can hold enough gas to perform throughout the entire magazine.