All Airsoft Batteries

If you're running an upgraded or MOSFET-equipped AEG, this Gens Ace 11.1v 25C 1500mAh LiPo Battery may be just what you need to power it. This Lithium Polymer (LiPo) battery is pre-wired to a Deans/T-Plug battery connector and consists of 3 cell groups wired in nun-chuck/crane/butterfly configuration. The wire length between the cells and connector is approximately 8cm and each of the 3 cells measures approximately 0.8 x 1.6 x 13 cm. 

Not all Airsoft AEGs are capable of running an 11.1V LiPo without causing damage, if you are unsure check the recommended battery section of the your gun's product description. LiPo batteries require balance charging, meaning this battery MUST be charged using a LiPo balance charger with the balance port connected. We recommend using a battery charging bag for storage and charging, and to never leave an Airsoft battery on charge while unattended. 

A LiPo Crane Stock battery designed to fit in stocks and small spaces which other large batteries do not fit. The battery is also know as a Nunchuck battery, with the cells connected via the wires allowing them to be placed down the side of barrels or in an M4 Crane Stock.

A LiPo stock tube battery designed to fit in buffer tubes and small spaces which other large batteries do not fit.

A battery designed and built by NUPROL specifically for Airsoft Skirmishers as part of their POWER range of Batteries, the battery is constructed from individual cells which are held together by durable shrink wrapping, and feature a mini-Tamiya connector to connect it to your weapon.

A ultra thin and lightweight battery, perfect for squeezing into even the tightest spots. The battery provides 1200mAh of power with a discharge rate of 20c, giving it a 20w output.

A LiPo stick battery for Airsoft, RC Cars and many other hobbies which comes as a stick configuration with a Deans connector. This battery is perfect for top-wired receivers and rear wired buffer tubes.

A High voltage Airsoft LiPo Battery designed to give your weapon the highest rate of fire possible, in addition to lasting as long as possible, reducing the amount of time players spend changing batteries on a Skirmish day. 

An 11.1v 1450mAh 30C LiPo in a stick configuration, which features a Deans connector instead of the standard small Tamiya.

A LiPo Battery for Airsoft Electric Guns, with a 7.4V rating and 1200mAh capacity. This LiPo Battery is laid out in a Nunchuck / Crane Stock configuration, which makes it ideal for Handguards and AR Stocks thanks to the slim design. If you own a battery-powered Airsoft Gun and need a compact LiPo with a sensible capacity, then these are perfect for you. Features a Mini Tamiya Connector.

A LiPo battery for Airsoft, RC Cars and many other hobbies, which comes in a Crane Stock/Butterfly configuration with a Deans connector. This battery is perfect for rear wired crane stocks and front wired handguards.

A stick 7.4v 1100mAh LiPo designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries, intended to allow Airsofters to get the best possible performance from their Airsoft Electric Guns.

A compact LiPo Airsoft Battery, designed to be used in tight awkward spaces, without compromising on overall capacity. It comes supplied with the more efficient Deans connector already installed.

A compact LiPo Airsoft battery, designed to be used in tight awkward spaces, without compromising on overall capacity.

An 11.1v 1200mAh 20c LiPo Battery with a Deans Connector in a Stick configuration, making it ideal for Solid Stocks and some rear wired Buffer Tubes. It has the following dimensions with a 9cm cable: 2cm x 1.63cm x 13cm.

A 7.4v LiPo Battery for Airsoft Electric Guns, specifically the Specna Arms PDW range and other replicas with a tight/compact Battery Compartment. The Battery has a capacity of 600mAh, and a discharge rate of 20/40C. The compact size of the Battery makes it ideal for PDW Stocks, Pistol Grips, PEQ Boxes and other tight battery spaces.

A Lithium Polymer battery for Airsoft, RC Cars and many other hobbies which comes as a Crane Stock configuration with a Deans connector. This battery is perfect for rear wired Crane Stocks and front wired handguards, and especially AEGs that require an 11.1v battery.

A thin and lightweight battery, perfect for squeezing into even the tightest spots. The battery provides 1200mAh of power with a discharge rate of 20c and is so thin it can fit into stock tubes and AK/MP5 AEG Battery compartments.

High quality WE 11.1v 1450mAh 30C LiPo Stick Battery, provides great battery life and fits most battery compartments. The 30C rating means the battery discharges quicker to give a higher rate of fire and better trigger response.

A very common Airsoft battery that is suitable for 99% of Airsoft electric weapons. It is in a compact block form making it ideal for M4 handguards and other roughly square battery compartments.

If you are heavy on the trigger with your LiPo ready AEP you might need a couple of these! The IPower 7.4V 680mAh 20c LiPo battery is just like a normal LiPo stick, but much much smaller. This battery is designed as a spare battery for the CYMA CM.xxxS series of LiPo-ready AEPs and is pre-wired to a mini-Deans connector. This battery can be charged like a normal LiPo battery; using the balance lead and with a LiPo balance charger. This battery cannot be charged with a normal NiMh/NiCad charger, do not attempt it as you may cause a fire. If you are the creative type this battery's minuscule form could lend itself well to an electronics project or R/C use.

A 7.4v rated LiPo Battery for Airsoft Electric Guns, specifically ones that need a compact battery for a small space, such as PDW Stocks and Pistol Grips. The Battery has a 600mAh Capacity and a 20/40C Discharge Rate, as well as having a Mini Tamiya Connector to make it compatible with a huge range of Airsoft Guns. If you need a compact 7.4v LiPo for a Specna Arms PDW or other Airsoft Gun with a tight battery space, then this is the ideal choice.

The VP Racing 8.4v 1600mAh crane stock battery is a highly popular NiMH battery that is identical to most free batteries included with Airsoft weapons.

A Battery designed to fit into most Crane Stocks, this is a 7 cell Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers as part of their POWER range of Batteries. 

Tried and true, everyone has use for NiMh crane stock batteries! The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance so you can use any charger as long as it's NiMh compatible, just make sure to not leave the battery charging unattended.

This battery has a voltage of 9.6v and a capacity of 1600mAh and is comprised of 8 cells working in unison, connected via the Mini-Tamiya connector.

This NiMh sports a crane configuration, one of the most common types and is perfect for split battery compartments, most commonly seen in M4 stocks, M16, SMG-5 and AKs with full stocks. The battery measures 12x1.8x1.8cm per 4x cells, with a wire length of roughly 8cm.

A LiPo Battery for Airsoft Electric Guns, with an 11.1v rating and 600mAh capacity. This compact 11.1v LiPo is ideal for PDWs and Airsoft Guns with a small battery space (specifically the Specna Arms PDWs), and features a Mini Tamiya Connector to connect to your AEG. If you have an Airsoft Gun that needs an 11.1v Battery, and has a tight battery compartment, then this is the ideal LiPo for you.

This is a high quality NUPROL 8.4v 1600mAh NiMH stick battery often used within Airsoft AK AEGs, or other weapons that features a long, thin battery compartment.

A LiPo battery for Airsoft Electric Guns which has been designed to output a high power for fast and consistent trigger response and high rate of fire for up to 3 quarters of a day on a slow charge. 

A high quality 1300mAh 7.4V LiPo battery suitable for Airsoft and RC use - perfect for fitting down stock tubes and areas with a small amount of space.

A Pack of two CR123A batteries that are used to power most Airsoft accessories. The battery provides 3V of power, and 1400mAh of charge.

An 11.1v rated LiPo Battery for Airsoft Electric Guns, featuring a Deans Connector to provide an efficient connection to your AEG. With a 600mAh Capacity, the overall dimensions are quite small, making it ideal for PDW Stocks, Pistol Grips and other really tight Battery Compartments.