Laylax

If you feel the need for speed, the EG Hard Gear Set 13:1 Ratio for Version 2/3 Gearbox from Laylax will give you just that! The renowned Laylax/Prometheus EG Hard Gear series boasts over a decade of service, crafted with precision through Japanese machining, heat treatment, and forging techniques that adhere to the highest standards. This meticulous manufacturing ensures a notably quieter gear mesh sound, even under higher FPS and fire rate conditions.

These are 13:1 high-speed gears, improving rate of fire and trigger response by cycling the gearbox once every 13 motor revolutions as opposed to the standard once per 18 revolutions. This means you can boost rate of fire without upgrading your motor, though like any other replacement gearsets, these will require expertise to install. If you already upgraded your motor, wiring and added a MOSFET and you still want more speed, this gearset will do the trick. 

An extended slide release is a great way to speed up your reload and encourage a consistent grip position on your pistol. The slide is machined from aluminium and provides a considerable extension to the standard slide stop on a Hi-CAPA GBB pistol with helpful serrations machined into its upper surface to provide enhanced grip.

Lightweight with a semi matte metallic texture, this slide is also a great way to customise and match the aesthetic of your beloved Hi-CAPA and create the perfect custom build.

If you need a bigger backup platform for your sniper rifle, why not run a P90? The Laylax P90 Quick Holster allows you to carry your P90 on your belt like a sidearm, making it perfect for heavier sniper loadouts where a full auto backup with decent long-range performance is essential. 

The holster comes pre-fitted with a belt mount suitable for belts of up to 3 inches in width, and the holster itself can be quickly detached from the mount via a steel latch for easier storage and transportation. The mount is also a rotary mount, meaning you can adjust the draw angle to suit your loadout and allow yourself quick access to your P90 regardless of what other kit you may be carrying. If you run a P90 as a backup to your sniper rifle, this is the holster you need!

Like your KRISS Vector, but find the stock options are a little bit limiting? Expand your horizons with this Laylax M4 stock base! The stock base retains the best parts of the original Kriss Vector design as well as the Alpine limited edition with an M4 buffer tube and stock. This allows you to install any solid M4 stocks that fit on a buffer tube, so you can integrate your favourite M4 stock on your Vector, or even swap them out, depending on the mission at hand, or to switch up your playstyle.

If your TM SCAR has developed a wobbly stock, or you are worried that it may do in the future, this is the part you need to sort it out! Introducing the Hard Stock Button from Laylax, a replacement for the original stock locking/folding button on the Tokyo Marui SCAR-L and SCAR-H Next generation recoil shock AEGs. The button is constructed from reinforced polymer, providing additional strength over the original stock button, guaranteeing reliable stock locking and eliminating wobble. The set also includes the stock button spring. 

A part placed inside the outer barrel of the Tokyo Marui G-Spec, designed to hold the inner barrel stable even whilst moving to provide a more accurate and stable shot. 

If you are worried about trapping your wiring when inserting a magazine or reinstalling your MCX handguard, Laylax has once again come up with a solution! The Wire Guard for MCX AEG is designed to mount to the gearbox shell and keep your wires well out of the way of any snags or potential damage from inserting magazines or removing/reinstalling the handguard. If you want to get ahead of one of the known problem areas of the MCX and save yourself some hassle down the line this affordable upgrade could save you time and money!

Upgrade your Hi-Capa with some eye-catching and rainbow flair! Constructed from lightweight aluminium, the trigger is made even lighter by way of a skeletonised design, as well as giving your pistol that cutting-edge custom look.

Being a round trigger, it is perfect for ergonomics, as your finger can easily rest on the trigger as you line up your shots.

This variant features a heat gradation finish, that is reminiscent of Bismuth to create your unique custom Hi-Capa.

As if the KRISS Vector couldn't get any more aggressive and badass, Laylax come along and make this beauty. Attached easily with 4 side screws, this rail system is constructed from sturdy brushed alloy. Dubbed by Laylax as the 'Swordfish' It features a 'breacher' spiked front end texture, great for breaking through doors and glass (but please don't try this at a skirmish event!).

Boasting a quad 20mm RIS rail system with two longer side rails and 2 shorter top and bottom rails that blend perfectly with your KRISS Vector and with 4 rails to now play with, you can customise your Vector to your heart's content with the tactical devices of your choosing. The robust and bulky design is perfect for those of you that prefer a sturdy handguard grip. Make sure your enemies learn to fear the KRISS Vector with this beastly front attachment!

A two-piece stainless steel VSR/BAR10 spring guide, designed for enhanced performance and efficiency. The guide is compatible with most Airsoft springs featuring an internal diameter of 11mm or smaller. 

If your primary is a SigAir MPX, MCX or has a 1913 Picatinny stock adapter you now have one more stock option thanks to Laylax! The Lightweight M4/AR-15 Stock Tube Adapter is designed to mount to a 1913/20mm Picatinny stock adapter or the built-in 1913 stock mount on the MPX and MCX platforms and provides a 6-position M4/AR-15 buffer tube constructed from aluminium, ready for any M4/AR-15 sliding stock you fancy. 

The buffer tube is machined to allow for wire routing in rear-wired setups and has a threaded rear cap to keep your battery well clear of dirt and debris. The main perk of this stock adapter is its remarkably low weight, tipping the scales at a mere 140g thanks to its aluminium construction. If you want a more conventional stock option for your 1913/20mm Picatinny stock equipped AEG or GBBR this is perfect for the job!

If you are looking for a CQB-optimised MCX setup the Laylax Short M-LOK handguard & Outer barrel set would be one way to get there! This CNC machined aluminium handguard, outer barrel and gas block set replaces the original parts from the Sig Air MCX AEG, making it into an ultra-compact platform to contend with all the micro-AR platforms dominating CQB sites.

Just like the original, this handguard boasts M-LOK compatibility, with slots available at the 3, 6, and 9 o'clock positions and the included 7-inch outer barrel has 14mm CCW male threading at the tip, ready for a suppressor or tracer for the sneaky types. If you find your MCX is a bit long and you prefer something more compact, no need to look at a new platform, just swap out a few parts and your MCX will fit right in your back pocket!

If you have switched out the handguard or outer barrel on your M4/AR15 and now it wobbles you need Laylax's barrel shims to firm it up! These shims are basically small discs of aluminium which can be sandwiched between the outer barrel and upper receiver to adjust the fit with various different barrel nuts. If you are building an M4 platform, be it an AEG or GBBR, these handy shims are essential to have in the toolbox if you want a new handguard or outer barrel to fit perfectly at the right place with no wobble whatsoever.

If you are one for hot-swapping your Hi-capa grips, congratulations on taking pure advantage of the modular nature of the platform! These grip screws from Nineball are designed to replace your old, worn-out grip screws with these absolutely beautiful and I dare say psychedelic variants.

Reminiscent of Bismuth, these grip screws have been heat gradated to really add some flair to your Hi-Capa. These can be used in tandem with other heat gradated parts to create a truly unique and eye-catching Hi-Capa.

2mm thick spacers designed to pre-compress your spring slightly to increase the FPS of your sniper rifle. 

A part placed inside the outer barrel of the Tokyo Marui VSR-10 Pro, designed to hold the inner barrel stable even whilst moving to provide a more accurate and stable shot. 

If you are running the ultimate sniper pistol, the Tokyo Marui MK23 SOCOM, we are sure you are the type of person who appreciates consistency and accuracy in your setup. That being the case, we recommend the Neo R Adjustable High Flow Bullet Valve from Laylax Nine Ball to bring your MK23 up a notch in consistency, improving its accuracy and offering adjustable velocity; allowing you to tune your MK23 to the very edge of site limits to gain every advantage you can! This valve replaces the knocker valve in your magazine and will require a valve key for installation. 

If you are running the ultimate sniper pistol, the Tokyo Marui MK23 SOCOM, we are sure you are the type of person who appreciates consistency and accuracy in your setup. That being the case, we recommend the Neo RR Adjustable High Flow Bullet Valve from Laylax Nine Ball to bring your MK23 up a notch in consistency. The Neo RR is the red version of Laylax's Neo R which itself is a development of the original Neo valve, offering adjustable velocity and allowing you to tune your MK23 to the very edge of site limits to gain every advantage you can. This valve replaces the knocker valve in your magazine and will require a valve key for installation. 

A must have upgrade component, featuring high quality materials and fine craftsmanship, proven time and time again to improve the air seal of your VSR/BAR-10 sniper rifle. 

If you own a VSR 10 Pro Sniper and want to mount an optical sight to extend your range this part is a highly flexible solution! The PSS10 VSR-10 Scope Mount Rail from Laylax is an innovative hybrid scope rail, combining 20mm Picatinny and 11mm Dovetail mounting solutions, offering you all the options as to what scope you choose for your setup. 

Hi-capa GBB pistols are probably the most customisable pistol on the Airsoft market, and with every day and every new release, they extend their lead! Introducing the Straight Trigger "Gamma" from Laylax, a precisely machined aluminium trigger with a stylish swept-back design, and a flat face to allow for faster firing. This trigger is finished in attractive metallic heat gradation colouration, giving the trigger an added touch of flair, making your Hi-capa stand out amongst the masses!

So your MK23 shoots as flat as a pancake out to 50m, why not give it some glass so you can take pure advantage of that impressive performance? Introducing the Laylax Nine Ball Custom "Gungnir" slide, an optics ready replacement slide for the TM MK23 and its clones, sporting a modernised design with two sets of backup iron sights. This slide is constructed from high density polymer, keeping the weight of your pistol to a minimum whilst giving it the added flair and functionality which comes with a custom slide. If you are looking for a way to add an optic to your MK23, this is the easiest and best looking (in our opinion) option out there!

If your MCX AEG has developed a bit of barrel wobble there is no need to take your suppressor off! Laylax is here to save the day with the Outer Barrel Support for MCX Virtus AEG. This piece is constructed from steel and mounts to the outer barrel base, locking it firmly in place and preventing even the slightest hint of wobble from developing, no matter how heavy your muzzle device is.

Installing this part will keep your outer barrel straight and true within the handguard and not only improves the structural strength of the MCX but should also improve accuracy by minimising flex in the inner barrel by giving the outer barrel a firm foundation. The Outer Barrel Support is constructed from steel, giving it more than enough strength to do its job perfectly.

If you have plans for a head-turner of a Hi-capa build with some serious flair, we have the perfect outer barrel for you! Introducing the Laylax Fluted Outer Barrel, an aluminium replacement for your original outer barrel finished in a beautiful and eye-catching heat gradation look. This outer barrel is compatible with the Tokyo Marui Hi-capa 5.1 GBB pistol and its clones. 

MK23 users should know by now what a nightmare it is to find a decent holster for this gargantuan pistol. By popular demand, Laylax has focussed their attention on the "snipers best friend", and have provided another option for MK23 users wanting to move away from the fabric universal holsters to something more suited to the 21st century. The Breakout Holster is constructed predominantly from reinforced polymer, with an alloy internal mechanism and steel springs, to provide the flagship feature of this holster; its spring loaded draw assist mechanism!

If you want to speed up your Vector manipulation Laylax has what you need in the form of the Custom Extended Magazine catch! This mag catch replaces the original and relocates the release button to the left side, just ahead of the trigger. This allows you to release the magazine with your trigger finger like with an M4/AR15 platform so you can use your support hand to reach for a new magazine, speeding up the reload process and getting you back online frighteningly fast with some practice.

This magazine release is constructed from aluminium and is styled to match the ultra-slick modern looks of the Vector platform, meaning your Vector won't lose its good looks when you upgrade the mag release. The release button itself is textured to allow it to be used in all weather conditions and can be extended or retracted to fit any hand size, allowing an easy, comfortable and fast reload process for all Vector users. Now KRISS Vector users can drop it like it's hot just like the M4/AR15 guys!

For those who want to take your KRISS Vector to the absolute max, Laylax has the addon, or addons for you! This package includes both a foregrip/magwell attachment and a forward finger guard, both constructed of lightweight, high-density polymer.

On the front and rear panels of the magwell grip and foregrip, we can see ridged textures to aid with grip and comp0lement the Vector's modern aesthetic. Likewise the sides of the foregrip feature something of stippled texture similar to the pistol grip of the Vector. All the inner edges are curved, with the foregrip having an ergonomic design that feels perfect between your thumb and palm.

Take your Vector to the edge, from an ultra-modern SMG to an advanced PDW!

The must have trigger unit and piston combination for any Airsoft sniper using a VSR/Bar-10 compatible platform. A 90 degree setup results in unreal strength for some incredibly strong spring choices.