Airsoft Receivers & Receiver Parts

If you've lost or damaged important parts from your CYMA's mag release, this should sort you out! The CYMA Bolt Catch is a replacement original part. Compatibility-wise, this set is intended for CYMA AEGs with alloy receivers, if your bolt catch got broken in a freak Airsoft accident, this set should get you back in the action!

An alloy, ambidextrous replacement mag release for M4/15/16 variant rifles that is ready to install right out of the packet.

A replacement dust cover for the top of CYMA CM.040 AK47 Variant Rifles, designed to add a top 20mm RIS / RAS Rail for the attachment of Sights and Scopes without the use of a Side Scope Mount. 

If you want the 9mm look for your UTR45, Hades Airsoft have what you need! The MP5/SMG-5 AEG Magazine Adapter for UTR45 fits the top of SMG-5 magazines and allows them to be loaded into the Double Eagle UTR45 AEG, giving you more magazine options than ever before. 

The adapter is constructed from 3D-printed polymer and is an adapter for the magazine and not for the gun, meaning you will need one adapter per SMG-5 magazine you plan to use. The perk of this system is that you can use your normal UTR45 magazines and complement them with SMG-5 magazines with adapters without having to change anything, including low, mid, high-caps and even drum magazines! 

If your dust cover has fallen off and been lost, the CYMA Ejection Port Dust Cover for M4/AR-15 AEG is the solution! This replacement original part is designed for the CYMA CM.097 AEG series but should also fit M4/AR-15 AEGs from other brands. The dust cover is constructed from steel but does not include the long bar/pin needed to mount it to an AR receiver, so make sure you still have yours and you should be set!

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

If you have lost your AK AEG charging handle spring, rod or top cover retention latch you are in luck! The CYMA Charging Handle Rod & Spring Set for AK47/74 AEG is an original replacement part set for CYMA AKs but should also fit other Tokyo Marui clone AK series AEGs as well. The set includes the charging handle spring, guide rod and top cover retention latch.

Constructed from lightweight alloy, the cover is easily fit by swapping it out with the original folding dust cover. With a rail measuring over 7 inches, this cover gives your AK some much-needed customisation options to which you can attach the sight or scope of your choosing. A scope can now be mounted to the very rear of your dust cover, which gives you a long sight radius.

The cover is installed in place of your rear sight by removing the rear sights' pin. Give your AK some love!

If you want to take your Airsoft AK AEG to the next level and give yourself some AR-style advantages, the Enhanced Safety Lever from CYMA will speed up your weapons manipulation and make up for the AK's "retro" ergonomics. This safety lever is constructed from steel and is compatible with most Airsoft AK AEG rifles on the market, and lets you switch fire modes using the trigger finger, without removing your hand from the pistol grip.

If you want to hot swap upper receivers like a real operator, now you can if you have a CYMA CM.097 AEG! The CM.097 Upper receiver is a replacement original part, and could be of use to someone wanting to freshen up an old AEG, or could be used to build a specialised replacement upper receiver so you can change your CM.097 length and battlefield role quickly and easily. The upper receiver comes with a pre-installed dust cover, charging handle, mock forward assist and mock bolt carrier, so no need to source these trim parts separately! This upper is a modern design with the squared off geometry and advanced look, making it a sure choice for a 21st century high speed M4/AR15 build.

An Aluminium constructed charging handle extension for AK style replicas.

If you have lost or damaged your original AK AEG bolt carrier it will probably still work, but man, is it ugly! CYMA's Charging Handle/Mock Bolt for AK AEG is a drop-in replacement part which solves this aesthetic issue, providing a black-finished alloy mock bolt carrier mimicking the finish applied to the real AK-74 series bolt carriers. This part will fit almost all CYMA AK AEGs and should also fit others with TM AEG compatibility. 

If your M4/AR15 AEG's charging handle is looking a bit tired, why not replace it for that box-fresh look! The M4/AR15 charging handle from KRYTAC is an original replacement part for KRYTAC M4/AR15 AEGs but will fit most other M4 AEGs with a version 2 gearbox. Included in the set are the charging handle and charging handle latch, the latter of which is pre-installed on the handle. The charging handle is constructed from aluminium and has a matt black hard anodized finish.

If you want to add some ambidextrous functionality to your M4/AR15 AEG or KWA ERG platform along with a hint of flare, this charging handle from PTS Syndicate would be perfect! The Radian Raptor-LT is based on the real steel Radian Raptor ambidextrous charging handle and includes licenced Radian trademarks laser engraved onto the handle itself.

To add a custom aesthetic, PTS has produced this charging handle with red or black levers on either side, giving your receiver a nice pop and letting observers know your gun has the custom touch!

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

If your team use M4s but you prefer the AR36 this will suit your needs! This replacement magazine well will allow you to share magazines with your team and use smaller and more prevalent M4 magazine pouches.

This Upper and Lower Receiver Set is an original replacement part for the APS ASR series M4/AR15 AEGs but may also fit other gearboxes, though it may require modification. The set includes an alloy upper and lower receiver, a bolt catch, charging handle, a magazine release, trigger guard, a steel dust cover and steel body pins. If you are building a spare upper for your APS ASR AEG this would be a perfect fit, but could also be used to add a touch of metal to a polymer M4/AR15 as long as you are okay with potentially undertaking modifications.

If your CM.097 lower receiver is damaged maybe it is time to replace it with a fresh one! The CYMA Alloy Lower Receiver for CM.097 M4/AR-15 AEG is a replacement original part for the CYMA CM.097 AEG series and is constructed from alloy. The body pins are constructed from steel for maximum strength, and the fire selector markings are finished in a modern style, with coloured bullet pictograms to indicate each mode of fire.

The set includes all body pins, the fire selector, the bolt catch and the magazine release, meaning no fiddling around trying to swap the trim parts from your old receiver, just drop your gearbox straight in!

If you have been messing around with your SMG-5 AEG and you have lost your pins, CYMA has the cure! This original parts set includes 2 body pins, one for the trigger group and one for the rear receiver/stock. The pins are constructed from alloy and are compatible with CYMA SMG-5 AEGs but may also fit others, though we cannot guarantee it.

We all lose small parts from time to time, luckily CYMA are happy to sell individual components like this! The AK Top Cover Latch from CYMA attaches to the gearbox shell, and with the help of the charging handle spring, holds your top cover on! The latch is compatible with version 3 gearbox shells, and TM-based AK designs. Quite an important bit I'm sure you agree...

If you are looking for custom parts to add some unique character to your M4/AR15 AEG to set it apart from all the others, you have found the perfect part! The 1A1 CNC bolt catch from Gate replaces the original dummy bolt catch on your M4/AR15 AEG with a precisely made alternative with a unique skull-shaped paddle. This part doesn't provide any function but looks really cool, so if you are after an aesthetic tweak for your custom M4 AEG then this part would be perfect for the job!

This metal AK47 body by CYMA is constructed from Aluminium and zinc alloy and is finished in a period accurate gun metal grey. This is the perfect solution for a CM.028 or CM.522 owner who wants to give their AK a metallic feel and increased realism!

If you are building your dream tactical AK, a railed dust cover can be a great addition to give you more optic mounting options, and the elite tactical look. The 5KU 20mm Railed Tactical AK Receiver Cover is designed to work with Z-Co style handguards and provides a 17-slot 20mm Picatinny rail on its upper surface, and a hinge mechanism which connects it to a Z-Co handguard for functionality similar to the ASK-74U, making battery changes a breeze for those who run a top wired AK. If you are working on your own Spetsnaz build, your AK needs this!

If you have misplaced your SMG-5's rear body/stock pin you are in luck! This CYMA original replacement part is designed for CYMA SMG-5 AEGs but may also fit others. This pin is the rear body pin which holds the stock to the receiver and is constructed from alloy.

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.

A Glass Nylon Fiber constructed Magwell adapter for the ASG Scorpion Evo, which serves as a reference point for your lead hand, and makes guiding a fresh Magazine into the Magwell much easier to perform from memory, allowing you to focus your attention solely on the battlefield where it belongs.

The CYMA Front Sling Mount Pin for SMG-5 AEG is a replacement original part for the CM.041 SMG-5 AEG series and mounts to the front sight block to provide a sling loop on the left side. If your original sling loop is damaged or has gone missing, here is your replacement!

If you've misplaced parts from your dust cover, this set should cure that! The Delta Armory Steel Dust Cover for M4/AR-15 AEGs is a replacement original part set for Delta Armory M4/AR-15 platform AEGs but should also fit most other brands, though we cannot guarantee it. The set includes the dust cover, axis pin, c-clip, and spring.