Airsoft Grips & Stocks

If you're running your AAP-01 or AAP-01C as a primary, the Action Army Folding Stock Kit for AAP-01 GBB Pistols provides an extra point of contact for improved accuracy and range and looks fantastic as a bonus! This sleek, minimalist folding stock kit is compatible with the AAP-01 and AAP-01C from Action Army, mounting via the hammer housing pin & rear sight. 

The stock offers length of pull adjustment, an adjustable cheek riser and side folding functionality, making it the equivalent of a SCAR or ACR stock but with a far more compact design well suited to the lightening fast AAP-01. Also moulded as part of the stock base we have a 20mm Picatinny optics rail, allowing you to mount a red dot sight or scope to your AAP to enhance its functionality as a primary. 

Steel QD sling sockets are present on either side of the toe of the stock, along with an additional socket beneath the stock mount, ideally placed for single-point slings. If you love the way your AAP-01 shoots but want to extend your effective range and turn it into a mean little carbine, the Action Army Folding Stock Kit for AAP-01 GBB Pistols is what you need to get the job done!

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

The CQB Front Grip from Big Dragon is designed to provide increased weapon control for those who prefer not to use vertical foregrips. This grip enables modern shooting grips such as the C-Clamp and gives the user a low profile, snag-free solution which assists rapid transitioning from target to target.

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

An Aluminium constructed Buffer Tube for Airsoft Electric M4/M15/M16 replicas, which allows you to install a telescopic stock to have greater control over the length of the rifle.

For those of you looking for a sturdier grip and improved range this vertical foregrip allows you to keep a low profile with a longer weapon at range or tougher grip when running and gunning during CQB.

A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.

A slight angled fore grip designed to stiffen up your grip and aid in improved accuracy down range. A must for anyone wishing to keep a low profile and slick look but gain a tactical advantage on a longer weapon or super CQB package.

An ergonomically designed 20mm RIS foregrip, created to promote a comfortable and natural grip on their Airsoft gun. Constructed from high quality polymer with a slightly textured surface.  

Add a foregrip your rifle for maximum control. The grip is secured tightly onto rails by first sliding it on then screwing the bottom until it is locked in place. The grip can be placed anywhere up and down a Quad Rail, and is designed to allow the user to chose where the additional control point on their weapon is placed. The further forward the grip is placed the slower the barrel will turn, and the further back the grip is placed the faster the barrel will turn. This is the perfect purchase for those Airsofters who want to add a bit of flair to their weapon, or want a grip on the front of their weapon.

If you, like many others run the coveted PDW style stocks but find yourself needing more battery space, CYMA have got something that fits the bill. Designed for rifles such at the CM.097E and CM.041G, this stock extension unit attaches to the base of the stock and gives you roughly 3cm of additional space to house larger batteries, which allows you stay in the field longer and keep picking off those all important targets.

Constructed from tough and sleek aluminium, this extension will blend right in with your loadout and no more will you fear running low in the heat of battle.

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

A tactical folding Vertical Foregrip, designed for use with Airsoft AEG and GBB rifles, which allows the user to flip it down when required and fold back up when not in use to give it a lower profile.

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

A vertical foregrip for 20mm RIS rails with a built-in spring-powered foregrip which will deploy at the press of a button.

A replacement ergonomic pistol grip for M4, M16 and AR-15 Platform AEG Receivers, simply replacing the original grip. 

If you're finding your current battery running out too quickly and have nowhere to store a larger battery this battery extension from Hades Airsoft has got you covered!

A PDW stock extension built from high density polymer, design specifically for the Double Eagle replica. Models include the M904G, M904C, M904L and M904R.

Keep yourself in the fight and shoot for longer durations with battery storage up to 16 cm within the stock.

If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you. 

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

A very low-profile and slim replacement M4 stock that provides a comfortable and slim line back end to your Airsoft gun for improved control. 

A very low-profile and slim replacement M4 stock that provides a comfortable and slim line back end to your Airsoft gun for improved control. 

If your AK buttstock is too slippery and is hard to shoulder when wearing a tactical vest this is what you need! The Element Rubber Butt Pad for AK47/74 is designed to slip over either AK fixed stocks or the AK74 side folding skeleton stock and provide enhanced grip for poor weather conditions and make the rifle easier to shoulder effectively with modern tactical gear. This butt pad is a copy of the real Izhmash AK butt pad which was issued to the Soviet and Russian Militaries, so would be a great choice for a Milsim build.

An ventilated, alloy constructed replacement base plate for a standard M4 AEG motor base plates in pistol grips.