Airsoft AK Rifles

The LCK-15 is an Airsoft Electric Gun based on the AK-15, which is a modernisation of the AK platform that went through many iterations and updates to counter issues, until the AK-12 and AK-15 were finalised.

This is not an AK, I repeat this is not an AK variant! It may share some silhouette similarities but the VZ.58 is a unique platform that was the standard service rifle for the Slovakian military from 1959 to 1984. This Delta Armory replica is licensed by the Real Steel Firearms company Czech Small Arms which is the only manufacturer of SA VZ.58 rifles. The DA-VZ58 is based on the SA VZ.58 Sporter Carbine except with a longer outer barrel. The trademarks to indicate this can be found on the AEG.

Internally, the Delta Armory DA-VZ58 CSA VZ.58 "Kosa" AEG features some of the high-quality pre-upgraded Delta Armory internals such as an EFCS programmable MOSFET 18:1 ratio steel gears, a quick change spring system, a unique gearbox design and a high torque motor. The EFCS MOSFET allows the fire modes to be reprogrammed for burst modes and semi-auto only using the Ares EFCS programmer (available separately) and also features a low-voltage cutoff function, protecting your battery from being damaged if the voltage drops too low.

If you're into modern Russian platforms and value realism, the ARCTURUS AK-12K AEG Rifle; Optical MOSFET will definitely put a smile on your face. Like other ARCTURUS AK platforms, this beast is made almost entirely from steel, with a stamped steel receiver and top cover, steel outer barrel and milled steel front sight block, giving you the authentic heft a proper AK replica needs. While the externals are absolutely bomb-proof and finished flawlessly, the internals of the AK-12K Optical MOSFET version are equally impressive!

Inside, you'll find a 6.03mm tightbore inner barrel paired with the ARCTURUS AK rotary HOP-up unit, giving you what you need to send BBs downrange accurately and consistently. The gearbox is a version 3 fitted with CNC 18:1 steel gears running on 8mm ball bearing bushings with a new nozzle made from CNC machined technopolymer, promising enhanced airseal qualities and reliable feeding in the long term. 

Star of the show is the ARCTURUS Optical MOSFET, providing the ultra-realistic 2-round burst mode just like the real AK-12 along with the ability to program the fire controls for burst modes of different durations, adjust pre-cocking and trigger sensitivity. The MOSFET also improves electrical efficiency which translates into a faster trigger response and raised rate of fire, especially when paired with the pre-installed 23K RPM high torque motor. If you're searching for an ultra-modern AK replica which is built like a tank and extremely well-equipped straight out of the box, the ARCTURUS AK-12K AEG Rifle; Optical MOSFET is one to watch!

For those with a thing for the classic utilitarian style of the AK platform who need a rifle for CQB duties, the AKS-74U has your name on it! The CM.045 High-Speed from CYMA takes the original CM.045's superb externals and drops in a 13:1 steel gearset, high-speed motor, silent piston and cylinder head with a polycarbonate piston with steel teeth to provide a pre-upgraded speed demon of an AK! To sweeten the deal, this AKS-74U comes with real wood handguards and a "bakelite" style magazine, matching the first generation of the AKS-74U and the most common variant seen in the hands of militaries, rebel groups and civilians worldwide.

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

If you are after an authentic looking AK74 with solid internals and an electric blowback system the APS AK74 is certainly worth a look! This AK is styled after the original AK74 issued to the Soviet Red Army during the 1970s, seeing service in Afghanistan before being supplemented by the AK74M in the early 1990s.

The AK74 EBB boasts real wood furniture with a smooth and authentic matt varnished finish and majority steel construction for the hefty and authentic feel you can only get from a properly built AK replica. To make things even more realistic, this AK has been worn down in all the key raised edges with a subtle but authentic battle-worn finish which provides a unique look without going over the top. If you like an AK with a well-loved look, this one would be a fine choice!

Those looking to build a modern Russian loadout, your prayers have been answered. ARCTURUS has already served us with a fine AK-12 replica, but this version has a few more tricks up its sleeve!

This AK-12 boasts the same majority steel full metal construction, faithful attention to detail and rock solid feel in the hands, but it now has a Perun optical MOSFET pre-installed, a high torque neodymium magnet motor and is pre-programmed for 2 round bursts!

If you ever had plans to get an AK-12 and upgrade it with a TITAN or ASTER, you no longer need to as the Perun MOSFET offers a wide range of functions, including pre-cocking, ROF adjustment, trigger sensitivity adjustment, programmable fire modes, binary trigger and full diagnostics, with a smart fuse built in and a low voltage alarm to save your batteries from damage. This is the ultimate AK-12 replica!

If you like your AKs lightweight and modern, the S&T AK-74MN Sports Line AEG should suit your needs. Based on the real steel AK-74MN, the most recent variant of the AK-74, this AEG is constructed primarily from high density polymer with steel and alloy parts to add strength where needed.

Equipped internally with a 6.02mm tightbore inner barrel, alloy slider HOP-up unit, version 3 gearbox with a quick change spring guide and 8mm slide bearing bushings, S&T has treated us to a respectable internal feature set for such an affordable AK. The externals are built using the VFC style, meaning realistic disassembly and compatibility with aftermarket external upgrades for VFC AKs. If you need a featherweight AK replica to maintain your speedy playstyle, the S&T AK-74MN is one to watch!

Wanting to get into Airsoft skirmishing and are a fan of the world renowned and iconic AK47? Look no further than the CM.028.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box.

For those with a thing for the classic utilitarian style of the AK platform who need a rifle for CQB duties, the AKS-74U has your name on it! The CM.045 High-Speed from CYMA takes the original CM.045's superb externals and drops in a 13:1 steel gearset, high-speed motor, silent piston and cylinder head with a polycarbonate piston with steel teeth to provide a pre-upgraded speed demon of an AK! To sweeten the deal, this AKS-74U comes with authentic-looking "Plum" coloured polymer furniture and magazine, matching AKs built during the 1985-1989 era.

If you have been eyeing up an ARCTURUS AK-12 but haven't yet taken the plunge, the AK-12 with AK-19 stock will make you glad you waited! This updated version of the AK-12 is styled after the latest AK-12 variants offered to civilian shooters, with improved ergonomics thanks to the new AK-19 stock and enhanced pistol grip. As with the previous ARCTURUS AK-12, this AEG is made almost entirely from steel, with a gorgeous stamped steel receiver and top cover and only the muzzle brake being alloy. On the outside, the AK-12 is slicker than ever before!

When it comes to internals, this variant of the AK-12 is equipped with an in-line MOSFET to improve trigger response and rate of fire and extend the life of the microswitch trigger by improving electrical efficiency. The gearbox is pre-upgraded with components focused on reducing friction, including a ball bearing quick change spring guide, ball bearing piston head, steel gears mounted on 8mm bushings and a ball bearing pinion gear to allow the high torque motor to spin more freely at high speeds. The inner barrel is a 6.01mm tightbore constructed from steel for maximum rigidity, and the ARCTURUS AK rotary HOP-up unit is also present, giving you the most modern innovation in AK HOP-ups with easier-to-apply adjustments and superb air seal.

Whether you are fixed on an AK-12 or you are checking out the AK platform options, the ARCTURUS AK-12 with AK-19 stock would make a fantastic, up-to-date primary for any modern Russian military or PMC loadout!

If you have been eyeing up an ARCTURUS AK-12 but haven't yet taken the plunge, the AK-12 with AK-19 stock will make you glad you waited! This updated version of the AK-12 is styled after the latest AK-12 variants offered to civilian shooters, with improved ergonomics thanks to the new AK-19 stock and enhanced pistol grip. As with the previous ARCTURUS AK-12, this AEG is made almost entirely from steel, with a gorgeous stamped steel receiver and top cover and only the muzzle brake being alloy. On the outside, the AK-12 is slicker than ever before!

When it comes to internals, this variant of the AK-12 is equipped with an in-line MOSFET to improve trigger response and rate of fire and extend the life of the microswitch trigger by improving electrical efficiency. The gearbox is pre-upgraded with components focused on reducing friction, including a ball bearing quick change spring guide, ball bearing piston head, steel gears mounted on 8mm bushings and a ball bearing pinion gear to allow the high torque motor to spin more freely at high speeds. The inner barrel is a 6.01mm tightbore constructed from steel for maximum rigidity, and the ARCTURUS AK rotary HOP-up unit is also present, giving you the most modern innovation in AK HOP-ups with easier-to-apply adjustments and superb air seal.

Whether you are fixed on an AK-12 or you are checking out the AK platform options, the ARCTURUS AK-12 with AK-19 stock would make a fantastic, up-to-date primary for any modern Russian military or PMC loadout!

If you're in search of a slick, modern AK to complete your PMC loadout, the Specna Arms SA-J06 EDGE™ AK-74 Tactical AEG w/Gate ASTER MOSFET is one to watch. This full metal AK AEG boasts a large proportion of steel in its build and is rocking an M-LOK/20mm Picatinny hybrid handguard, 20mm railed gas block and M4/AR-15 buffer tube, sidestepping the usual utilitarian AK ergonomics for vast handling and modularity improvements. 

Inside, things get even better! The ORION reinforced gearbox is present, equipped with an aluminium piston head and cylinder head, a steel-toothed polycarbonate piston and reinforced steel gears. This superb, hard-wearing gearbox is backed up by the advanced Gate ASTER MOSFET, one of our favourite electronic trigger units offering absolutely loads of programmable functions via the Gate Control Station App along with vast improvements in rate of fire and trigger response. If you're planning a tactical AK build, the Specna Arms SA-J06 EDGE™ AK-74 Tactical AEG w/Gate ASTER MOSFET will save you a lot of work!

If you are the sneaky type of skirmisher and fancy using something Russian, the AKS-74U is calling your name! This bundle combines the superb CM.045A AKS-74U AEG from CYMA with a PBS-4 Suppressor and two spare 200rnd mid-cap magazines getting you ready to skirmish eastern style or as a mercenary/PMC. The PBS-4 is the caliber correct suppressor for the AKS-74U, giving you a professional setup which will impress the milsim inclined and avoid any of the "ACKCHYUALLY" moments. 

If you are new to skirmishing or are looking for a lightweight backup AEG in AK flavour, check this out! The S&T AK-105 Sports Line AEG is constructed primarily from high density polymer using the VFC construction style, meaning realistic disassembly for the AK realism nuts!

This AK replicates the AK-105, the mid-length AK designed to replace the AKS-74U in service with Russian special forces. Widely regarded as the best looking AK length, the -105 rocks a 12.4-inch outer barrel and side folding AK-74M stock, making it a handy platform for both indoor and outdoor skirmishes.

Inside, we are treated to a quick change spring system and 18:1 ratio steel gears running on 8mm slide bearings for a smooth gearbox sound and reduced friction. The inner barrel is a 6.02mm tightbore example paired with an alloy slider HOP-up unit so you can get the job done at long range. If you're looking for a platform that is light and fast but it has to be an AK, your needs are finally met!

If you're looking for a mid-length AK with the robust and realistic feel of steel the Evolution Airsoft E-104 would be a great choice. As part of Evolution Airsoft's "Hard Core" range, this AK sports full metal construction with a large proportion of steel in its build, an alloy adjustable HOP-up unit and a well-equipped version 3 gearbox bristling with upgraded parts. The E-104 replicates the real steel AK-104/105 with its 12-inch barrel and comes with a side folding skeleton stock meaning you can shorten the rifle easily for carry or close-quarters work. For an AK that can do it all, you cannot go wrong with the E-104!

The Arcturus AK-12 is a replica of the legendary AK-12, an updated revisit of the AK Platform in an attempt to bring it into the modern day. This replica is built to a stunning standard using majoritively Steel for the externals, with handy features like a Quick Change Spring and Microswitch Trigger.

If you are looking for a CQB primary with an out-of-the-box custom look the ARCTURUS AK74U Tactical Sub Carbine AEG would be a fine choice and is a welcome breath of fresh air amidst the noxious cloud of standard AKS-74U AEG rifles on skirmish fields today. This AK74U rifle is around the same length as a standard AKS-74U but uses an RPK-style reinforced AK receiver and trunnion block setup, giving you something you simply cannot build yourself starting with an AKS-74U.

On the inside, this AK is outfitted similarly to other ARCTURUS offerings, with a well built gearbox boasting a range of reinforced low friction components, a 6.01mm steel tightbore inner barrel and a microswitch trigger to provide a snappy response and replace the conventional trigger contacts which are a known weakness of AEG gearboxes. With majority steel construction, plenty of accessory options and some choice modern ergonomic enhancements this AK is hard to beat when things get up close and personal!

If you're interested in AKs but the weight of a full metal build puts you off, the S&T AKMN Sports Line AEG should suit your needs. This AKM replica is constructed primarily from high-density polymer with stamped steel and alloy parts, using the VFC construction standard for maximum realism.

The AKMN is the modernised version of the original AK-47, equipped with the Russian AK side rail so you can mount a Russian-style optic or 20mm rail adapter. This AK is one of the most common variants found in conflict zones across the world next to the Chinese Type 56 and is the perfect platform for modern OPFOR, PMC and rebel loadouts.

Internally, this affordable AK is equipped rather well for the price, boasting a 6.02mm tightbore inner barrel, an alloy version 3 gearbox with steel 18:1 ratio gears running on 8mm slide bearing bushings with a quick change spring system for easy power tuning. The HOP-up unit is also constructed from alloy, adding extra strength so it will likely never need replacing. If you fancy an AK as a lightweight backup platform or for a suitably speedy OPFOR loadout, the S&T AKMN is the one to go for!

For years G&G have dominated the entry-level M4 market, but have now shifted their focus to the AK platform to bring you a competitive and reasonably priced AK47 electric powered replica. Constructed from high density polymer, it is tough yet lightweight allowing you to move around with ease for a run and gun style playstyle.

If you are in the mood for an AK but you want one from this century, an AK-12 is the AK for you. The Double Bell AK-12 is the most affordable AK-12 replica yet released, boasting full metal construction with a high proportion of steel parts, a 6.03mm tightbore inner barrel, quick change spring equipped version 3 gearbox and steel gears running on 8mm ball bearing bushings.

Double Bell's AK-12 offering differs from previous AK-12s in that it is more closely based on a standard AK, with an easy access battery compartment beneath the hinged top cover, a standard AK fire selector switch instead of the extended type and a standard AK receiver with authentic stamped Cyrillic selector markings. While this isn't 100% purebred AK-12, it gives you the silhouette of the most modern Russian service rifle and its plethora of accessory rails for a more affordable price and without compromise when it comes to build materials. If you want the heft, majority steel build and sheer presence of an AK platform without the difficulties mounting accessories, the Double Bell AK-12 will do the trick!

A 6mm BB Airsoft Electric Gun, based on the AK-102, and given a comprehensive overhaul, creating an Operator Platform that is incredibly dynamic.

If you can't decide whether you want something modern or an AK, with the CYMA CM.103 AK Alfa you can have both! This AK has been modernised throughout to the point that it is barely recognisable as an AK, boasting an advanced side folding retractable stock similar to SCAR and ACR stocks, an aluminium monolithic upper receiver, plenty of 20mm Picatinny rails and ambidextrous controls across the design, allowing it to go toe to toe with the most modern platforms available to Airsofters.

As one of CYMA's Platinium Edition AEGs, the CM.103 is equipped with CYMA's pre-upgraded Platinum Edition gearbox, featuring 13:1 ratio high speed CNC steel gears, a high torque motor, and a MOSFET to allow for 11.1V battery use. The MOSFET also improves electrical efficiency which translates to even better performance down range and the high rate of fire and trigger response it provides pairs perfectly with the 6.03mm tightbore inner barrel and alloy HOP-up unit to create a true beast in the performance department.

If you are looking for a uniquely styled Airsoft AEG which hybridizes modern SCAR like construction with AK mag compatibility and CYMA Platinum performance, the CM.103 AK Alfa does all that while confusing even the veterans and drawing the eye of curious skirmishers wondering what on earth it is!

If you like the Cold War AK aesthetic, you'll love the S&T AKS-74N Sports Line! Patterned after the real steel AKS-74N, the folding stock AK-74 issued to paratroopers and mechanised infantry with a Russian AK side optics rail, the S&T AKS-74N is constructed primarily from high-density polymer with alloy and steel parts, keeping weight low and agility high.

Inside, we are treated to a 6.02mm tightbore inner barrel, quick change spring system and 18:1 steel gears running on 8mm slide bearing bushings, giving you a head start over other cost-effective AEGs when it comes to internals and performance. Whether you are working on a Soviet-Afghan War loadout or you want a lightweight AK for your rebel/OPFOR kit, the S&T AKS-74N will keep you light on your feet and get the job done down range!

If you like AKs but don't like their weight, the S&T AK-74N Sports Line AEG is the AK for you! This AK-74N replica is constructed from high-density polymer with choice alloy and steel parts to add strength where needed. This means, despite being an AK replica this beast tips the scales at a mere 2.3kg, giving it agile handling ideal for aggressive skirmishers or younger players with less physical strength.

Inside, we are treated to some thoughtful pre-upgraded parts, even in this cost-effective"Sports Line" AEG. The inner barrel is a 6.02mm tightbore example, offering improved accuracy and a slight raise in FPS from air seal improvements. The gearbox is version 3, with an alloy shell and steel 18:1 ratio gears running on 8mm steel slide bearings, meaning a smooth gearbox report with compatibility with common upgrade parts for those who want more. If you like the idea of a featherweight AK and are into the Cold War aesthetic, this is the AK to go for!

If you've got your eye on an AK but you have limited storage space, the AKMS is the ideal AK AEG for you. This example, the CYMA CM.048SU AEG hybridises the AKMS modernised underfolding AK with the thumbhole handguard of the AKMSU rifle to create a unique AK variant which keeps the classic AK steel and wood format but steps aside from the "issued" style for more of a PMC aesthetic.

Not content with providing the fantastic external quality CYMA's CM.04X AK series is known for, the internals of this AK replica have been upgraded with a wide range of enhancements, including a silent piston head and cylinder head, high torque motor, 7mm ball bearing bushings and an alloy adjustable HOP-up unit paired with a 6.03mm tightbore inner barrel to top it all off. If you want a unique looking AK replica with loads of steel parts, wood furniture and the performance to stay ahead in game, the CYMA CM.048SU AEG is the perfect choice!

An Airsoft Electronic 6mm BB Gun, based on the AK74 with more Tactical and Modern Features than the standard design and features G&G's new ETU and MOSFET Control System. 

Those looking for a modern full length AK rifle which is well built but lightweight, this should interest you! The SA-J71 CORE™ is Specna Arms' AK-74M replica, boasting the solid CORE™ internals in a modern AK shape format. This AK is far more realistically built than other polymer AK rifles as it uses the VFC style of external construction, meaning pins and rivets instead of screws, a realistically slim side folding stock and as close as is possible to realistic disassembly with an AEG.

The SA-J71 weighs a mere 2.5kg approximately, and Specna gets away with this with a high density polymer receiver, gas tube and gas block which has the added benefit of increasing the rifle's resistance to scratches. It is about time AK fans were able to skirmish all day without the extra weight of a steel receiver slowing them down!

An Electric Airsoft rifle based on the world famous and seemingly timeless AK47, now updated with a more practical, and tactical configuration! Complete with a side folding stock, folding vertical foregrip and handguards sporting 20mm Picatinny rails, the CM.028U is perfect for PMC impressionists, and those who want something with rails which isn't an M4!