EU Warehouse Stock

If you have a habit of wandering into places you shouldn't be this patch should be right up your street! The Danger Close 3D PVC Morale Patch from 8Fields Tactical depicts two gentlemen taking a stroll under heavy aerial bombardment with only an umbrella to protect them. How British!

Morale patches are a great way to bring some positive vibes to a skirmish and make those around you smile as you shoot at each other. The patch is constructed from PVC with a 3D effect and the central triangle glows in the dark so everyone can see you are a risk taker!

If you are using a buckle up "micro-rig", or a more modern plate carrier with a velcro lined kangaroo style pouch, being able to attach pouches without increasing the bulk of your rig is a major benefit. This Double AR-10/SR25/7.62 Magazine insert is designed to slip inside a velcro lined pouch, whether it is on the front of a plate carrier or on a chest rig, and hold 2x 7.62 STANAG sized magazines (SR25, M14, SCAR-H). The pouch is constructed from 1000D Polyester and includes male velcro on one side and female velcro on the other, with elastic loops at the bottom to hold the magazines in.

If your selector lever is looking a bit worn, or you have a fancy selector lever installed and you want to go back to the classic look, check out the M4/AR15 AEG safety selector from CYMA. A replacement original part, this fire selector should go straight onto any CYMA M4/AR15 AEG and will also fit many others! The selector set includes a fire selector blank plate for the right side of the receiver, selector cam, ball-bearing detent, and spring.

A 20rnd spare or replacement Magazine for the CYMA branded CM.706 Airsoft Sniper Rifle. If you want to spend more time set up in your nest and less time walking back to the safe zone for a reload, then you need to stock up on Magazines to prevent you having to give away a good position. Constructed from a mix of Alloy and Polymer, these Magazines can be filled by hand or using a Speedloader, and are a great way to stay in the fight for longer. The design of the Magazine allows them to 'spring' out of the Mag Well when released, making them much easier to remove.

If you're running an AK and need somewhere to stash spare mags, the 8Fields Tactical MOLLE Double Magazine Pouch for AK Rifles is ideal. This magazine pouch mounts to MOLLE webbing commonly found on tactical vests, belts and backpacks, equipped with additional MOLLE loops on the front so you can stack other pouches on top for long-duration ops. 

The pouch is constructed from 1000D Polyester, offering strength via high stitch density. Designed to hold 2 7.62 or 5.45 style AK magazines secured via elastic bungee cords, this is an open-topped mag pouch to allow quick access. You also have the option of removing the bungee retainers entirely to get at your mags even quicker at a small sacrifice of less secure retention. If you're in search of cheap but effective MOLLE AK mag pouches, the 8Fields Tactical MOLLE Double Magazine Pouch for AK Rifles is the one to go for!

If you have hammer issues with your Army Armament Hi-Capa, this should help! The Hammer and Strut for Hi-Capa GBB Pistols from Army Armament is constructed from Aluminium and an original replacement part for the Army Armament Hi-Capa GBB series, including the R501, R504, R603, R608, R609 and potentially others. The set includes both the hammer and hammer strut and should be compatible with most TM clone Hi-Capa pistols, though it may need mods for anything other than Army Armament 'Capas. 

If you have ever spent some time crawling in the woods and stood up to discover your pistol has gone walkies a Tactical Lanyard should help! The Multi-Purpose Tactical Lanyard is designed to keep essential equipment retained on your person at all times, though we don't advise using this on reusable grenades for obvious reasons!

The lanyard is constructed from steel wire with a protective polymer coating; offering strength, flexibility and keeping the internal wire free of rust no matter what your operating environment. The mounting loop is constructed from nylon with both a steel snap-button and velcro to keep it firmly mounted.

The mounting loop is designed for belts of 2 inches or less in width but could easily be attached to a MOLLE loop for those who run wider MOLLE belts. If your pistol has a lanyard loop and you are worried about losing it while stalking your prey in the woods, with the OPSMEN Multi-Purpose Tactical Lanyard you can forget your worries and focus on getting the job done!

If you need easy access magazine pouches for your pistol belt, these will do the trick! The Amomax Double Magazine Carrier For P226/M9 GBB Pistols takes 2 P226 or M9 magazines and has adjustable retention via the screw on the front, and is mounted to its paddle belt mount via a rotary interface, meaning it can be adjusted and set at the perfect draw angle for you.

If you want a more realistic muzzle device for your CM.041 series SMG-5 from CYMA, the 5KU SMG-5 Tri-lug Muzzle Device is the one to go for! Patterned after the real steel Tri-Lug muzzle device, unlike most Airsoft examples, the 5KU model doesn't include a threaded section at the front, making it more suitable for old-school SMG-5 setups, especially if you're a stitch counter. 

Compatibility-wise, this muzzle device is only compatible with SMG-5s from CYMA, specifically the CM.041 series and won't fit other brands, nor will it fit the -K and SD variants. 

Maybe you have accidentally broken your AUG vertical grip, or you bought the railed version and you want to embrace tradition? Luck would have it Army Armament now offers their AUG folding vertical grip as a spare part! The grip is constructed from high-strength ABS polymer with an alloy core and includes its spring and mounting pin. This part is compatible with the Army Armament AUG but may also fit AEG AUGs from other manufacturers.

A 6mm BB Airsoft replica flash hider, designed for CYMA manufactured AK47 and AK74 replica Airsoft Electric Guns. This replica flash hider is an incredibly simple yet effective way to add an additional element of realism to your AEG AKs.

A shell for gearbox type V2 with reinforced aluminium construction. The front part has been strengthened with the most exposed area being considerably thickened and the area of the contact with the cylinder has been improved so as to evenly transfer the loads.

The shell is mounted using its 8mm bearings. This gearbox shell is designed for use in J.G replicas but should potentially work in replicas of other makes and manufacturers.

This magazine is specifically for the STTI ST92F, in that this is a non-blowback mag and features incredible gas efficiency. The magazine is constructed from high high-density polymer and is incredibly lightweight compared to tis alloy counterparts. The magazine holds 23 rounds, filled at the top using a speed loader and the gas is filled at the bottom with green gas.

An incredibly imposing drum magazine that holds a whopping 550 rounds, and is constructed from a dense Alloy for a tough and long-lasting finish. Providing the Thompson M1A1 CM.033 with the classic Gangster-Gun aesthetic that we've infamously come to know and love. 

If you need mags for your King Arms VSS Vintorez or AS VAL these are the ones! This great value box of 5 midcaps is built to match the real thing perfectly, including the reinforcement ribs on the sides and the unique shape of the 9X39mm real steel Vintorez/VAL magazine. The magazines can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. Being spring-loaded mid-caps, with these mags in your rig you don't need to worry about battle rattle!

These mags are designed for the King Arms VSS Vintorez/AS VAL AEG platform and will not work in the LCT or CYMA VSS/AS VAL AEGs.

If you are looking for a Tracer Unit with Russian styling the KP-9 Spitfire Tracer Unit from 5KU is one to keep an eye on. This device is based on the real world MPI KP-9 flash suppressor used by Russian Special Forces with their PP-19-01 SMGs and is ideal for any 9mm style Airsoft SMG but will fit any Airsoft rifle with a 14mm CCW male threaded barrel.

This KP-9 isn't just about the looks either, inside you will find a Spitfire Tracer insert which illuminates green tracer BBs and provides a realistic muzzle flash effect each time you fire. The unit can be operated in flash only, tracer only or tracer and flash mode, giving plenty of options for the aggressive, the realism focussed and the more stealthy playstyles out there. Whether you run a PP-19 AEG or you are looking for the most menacing looking Spitfire tracer unit out there, this will do the trick!

If you are building your dream tactical AK, a railed dust cover can be a great addition to give you more optic mounting options, and the elite tactical look. The 5KU 20mm Railed Tactical AK Receiver Cover is designed to work with Z-Co style handguards and provides a 17-slot 20mm Picatinny rail on its upper surface, and a hinge mechanism which connects it to a Z-Co handguard for functionality similar to the ASK-74U, making battery changes a breeze for those who run a top wired AK. If you are working on your own Spetsnaz build, your AK needs this!

The Army Armament R604 is a Gas Blowback Airsoft Pistol based on the Hi-Capa frame, which is known for its good gas performance due to large Magazines. The lightweight Slide also benefits the Pistol's performance, by having less weight to move around, giving it a snappy Trigger Response and better cold weather performance than standard.

An LPVO/Short dot style optic with a fine crosshair, which can be illuminated in red for extra visibility. The Vector Optics Forester series of riflescopes are well known for their high-quality construction and impressive functionality. The 1-5x24 Forester scope is the perfect scope for medium to long-range engagements and would look right at home on a DMR, Sniper rifle or DMR styled AEG rifle.

A modernised AK-74 6mm Airsoft AEG Replica, with a ergonomic polymer Hand Guard, Moulded Grip and folding Solid Stock. The Rifle is constructed with an Alloy body, with Polymer Hand Guard, Grip and Stock.

Those who love to exchange fire at kissing distance, ARCTURUS has a treat for you! The AT-NY05 Karambit Lite is a super short and light M4/AR-15 platform with a well tuned gearbox packed with pre-upgraded parts, and ambidextrous controls to keep both left and right-handed shooters happy!

The Karambit Lite makes use of the same superb internals as the full metal Karambit, but has a high density polymer receiver designed to match highly modern "billet" AR-15 receivers for a cutting edge look. The Karambit Lite is a pocket rocket, small enough to cut any corner nice and tight, but capable of surprising accuracy thanks to its steel 6.03mm tightbore inner barrel and rotary HOP-up combination. The choice of CQB primary just got harder!

If you have misplaced your SMG-5's rear body/stock pin you are in luck! This CYMA original replacement part is designed for CYMA SMG-5 AEGs but may also fit others. This pin is the rear body pin which holds the stock to the receiver and is constructed from alloy.

If you are sick and tired of messing around with velcro every time you want to take a breather and get that sweaty plate carrier off, this cummerbund should solve that! The 8Fields Tactical Quick Release Cummerbund for Plate Carrier should fit most Airsoft plate carriers which use a removable cummerbund with velcro at the front and bungee cord at the rear.

The cummerbund is fully adjustable via the rear bungee cords which have polymer toggles attached to keep everything neat, and the polymer buckles have elastic shrouds to prevent them from being pressed inadvertently. The cummerbund also has MOLLE loops sewn in so you can add pouches to increase your load-bearing capacity if needed. The advantages of a quick-release cummerbund are innumerable; not only can you remove your PC quickly when you need a break, but it also saves you time readjusting the velcro for a comfortable fit! Simply clip it on and clip it off, no more messing around!

If you've lost an SR25 selector switch, this should be helpful! The CYMA Selector Switch Set for CM.098 SR25 AEGs is a replacement original parts set for the CM.098 SR25 series and includes the left and right side selector switches, mounting screws, springs and ball bearings for that lovely "click" between modes. 

The switches themselves are constructed from alloy and match the KAC-style selectors found on the CM.098 series, including the scallop on the right side selector and the undercut on the left side selector to allow for full auto fire. Selector switches are always going missing, but with this set handy, your CM.098 won't miss a beat even if the worst happens!

A MOLLE attached EDC (Every Day Carrier), that comes in handy for any tactical accessories, equipment or even civi devices such as phones, cameras and more!

Secured in pace with a double zip, there's no way your valuable items and gear is dropping on the floor when running from objective to objective. The pouch also features an elastic pocket pouch on the front for other loose items and folded documents as well as a Velcro panel for additional options.

If you need mid-cap mags for your Classic Army based FAL AEG these should do the trick! The Fuxing 160rnd Mid-cap Magazine for JG/CA LK58/ SA58 AEG is constructed with a steel shell, polymer internals and a steel feed spring and as with all mid-caps, this thing doesn't rattle like maracas as you advance on the enemy!

The mag can be loaded through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading rod/tool and needs to be inserted into your LK58 or SA58 AEG with a "rock and lock" motion. The mags are designed for the JG LK58 AEG platform but should also work in the Classic Army SA58 on which the design is based.

If you've lost a selector switch from your ARCTURUS AR15 Lite AEG, this set will sort you out! The Ambidextrous Selector Switch Set for AR15 Lite Series from ARCTURUS is an original replacement parts set specifically for the ARCTURUS AR15 Lite AEG series and is unlikely to fit other brands and models of M4 AEG. 

The set includes both selector switches, the mounting bolts, the detent and detent spring, replacing the entire external selector mech of the AR15 Lite. If you had a mid-game mishap and lost a selector switch, this set will get you up and running again!

If you're looking for magazines for your big boy AR, the East Crane 130rnd Steel Mid-Cap Magazine For SR25/AR10 AEG should do the trick! This magazine is constructed with a stamped steel shell and polymer internals, patterned after real steel SR25 20-round magazines and holding 130 BBs. Like other Airsoft mid-caps, this mag is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. 

Compatibility-wise, this magazine is for SR25 AEGs and will not fit standard M4/AR-15 receivers. Patterned after the Classic Army SR25 magazine style, this mag should fit East Crane, Classic Army, CYMA and A&K SR25 AEGs but won't fit G&G SR25s due to their different magazine design. 

If you like an AK but want something a bit more handy for CQB, the CM.045A AKS-74U is what you need! This subcompact AK variant is constructed almost entirely from steel, with a stamped steel receiver and top cover to give an authentic feel in the hands, along with real wood handguards to complete the AK look. 

While the build quality of the CM.045A is second to none in its pricerange, the internals are also worth shouting about! Featuring steel gears running on 7mm ball bearing bushings, a ball bearing equipped spring guide, a high torque motor and a silent piston and cylinder head set you have very little else to do to get the most out of this "Krinkov" AKS-74U.  If you want a realistic AK that shoots as good as it looks, you have found it!

If you are looking for something to keep heads down at an outdoor skirmish, or something to upgrade to a DMR in the future, the CM.068D is perfectly suited to the task! This M4/AR15 platform AEG sports full metal construction, a 6.03mm tight bore inner barrel, long quad 20mm Picatinny rail handguard, and extended controls, but the real icing on the cake is its silent piston and cylinder heads, which significantly muffle the gearbox noise. This rifle is a few choice upgrades away from DMR capability, but performs surprisingly well as it is!