Delta Armory Airsoft

If you're looking for an affordable MK18 MOD.1 platform for a build project or Milsim loadout, the Delta Armory DA-GP-B15 BRAVO™ MK18 MOD.1 M4/AR-15 AEG is one to watch. This variant of Delta's MK18 is a little different than the previous version, now equipped with a standard Milspec receiver shape and Crane stock with licenced trademarks from GrandPower Firearms. 

Inside, the DA-GP-B15 is equipped with the same internals as other BRAVO™ platforms, including an SHS tappet plate, SHS piston with a full steel tooth rack, 7mm ball bearing bushings and a reinforced gearbox shell with a quick change spring guide. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, getting you off the mark with above-average accuracy potential and a slight FPS boost. 

Externally, the DA-GP-B15 build style follows the standard BRAVO format, with a CNC aluminium handguard, alloy outer barrel with a high density polymer receiver and buffer tube. This means it tips the scales at far less than a full metal MK18 but still has realistic weight distribution; perfect for those who want to mount the kitchen sink to their primary without compromising in-game agility. If you like the Milspec MK18 aesthetic but prefer to fight easy, the Delta Armory DA-GP-B15 BRAVO™ MK18 MOD.1 M4/AR-15 AEG should suit you perfectly!

If you need a rifle mag pouch which fits almost every assault rifle replica out there, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M4/AR-15 mags to AK and 7.62x51 DMR magazines. The only mags that won't quite fit in are HK417 mags, though AR36 mags fit in nicely with some adjustment. 

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring multiple rigs, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is the pouch you need!

If you need a rifle mag pouch which fits almost every assault rifle replica out there, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is what you need.  This pouch is constructed from flexible polymer and is fully adjustable via bungee cord, meaning you can use it for almost any rifle mag, from M4/AR-15 mags to AK and 7.62x51 DMR magazines. The only mags that won't quite fit in are HK417 mags, though AR36 mags fit in nicely with some adjustment. 

The pouch mounts to MOLLE webbing using the polymer hooks on the rear, retained by a polymer clip. The draw angle can also be adjusted by repositioning the rear screws, allowing you to tilt the pouch forwards or rearwards for a smoother draw. If you run multiple rifle platforms in a single day but don't want to bring multiple rigs, the Delta Armory Adjustable MOLLE Magazine Pouch for Rifle Mags is the pouch you need!

If you're looking for 0.28g BIO BBs for woodland warfare, Delta Armory 0.28g Diamond 6mm BIO BBs are a fine choice. These BBs are supplied in a 1KG resealable bag of approximately 3571 BBs and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

Being made from biodegradable materials means these BBs are suitable for outdoor skirmishing at any site in the country and great for target shooting in the back garden. 0.28G BBs offer a few benefits compared to lighter weights, including extending range with the correct HOP-up setting, improving wind resistance and increasing foliage penetration potential. If you've got an outdoor skirmish booked, Delta Armory 0.28g Diamond 6mm BIO BBs are the right ammo for the job!

If your M4/AR-15 is due a style up, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need! This unique handguard boasts hexagonal vent ports, M-LOK slots at 3, 6, and 9 o'clock and a 20mm Picatinny rail up top, ready for your choice of M-LOK or 20mm Picatinny accessories. The vent ports both look fantastic and reduce weight considerably, giving you a fast-to-point front end and slick external styling. 

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. The HEX handguard also includes the correct barrel nut to mount it, pre-installed inside the handguard and constructed from aluminium. 

As with most M4/AR-15 handguards, you'll need an M4/AR-15 barrel nut wrench to install the HEX but it should fit most M4/AR-15 receivers on the market, AEG or GBB. If you're looking for a fresh look for your AR platform and want more accessory options with less overall weight, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need!

If you need a sneaky primary for mid to long-range, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG should be on your shopping list. This full metal M4/AR-15 AEG boasts Delta Armory's best internals yet, kitted out on the inside with Delta's programmable MOSFET/ETU system, a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, and a high torque motor. The Delta MOSFET/ETU offers the option of 3 or 5-round burst, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself. 

Externally, this beast is ready for DMR duty, boasting a lengthy KeyMod handguard for accessories and an integral suppressor for that stealthy styling. Add an LPVO scope and the look is complete, whether you're going for a full high-FPS DMR build or simply seeking an accurised assault rifle. If you like integrally suppressed AR builds and are looking for a longer alternative to the common short configurations, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG is a fantastic choice!

The Delta Armory 22mm Offset Angled Mount has an aluminium alloy construction, making it tough and lightweight. It is designed to install Torches, Lasers and other 20mm RIS Accessories at a 45-degree angle, which allows you to maximise the available space you have on your Airsoft Gun.

An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories. Although designed for torches, this rail could also be used to mount an offset Red Dot Sight to use as a backup to your main sight. The Delta Armory 22mm Offset Angled Mount easily attaches to 20mm Rails via the Allen Screw on the side of the unit.

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat. 

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted. 

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!

If you want to get into Airsoft skirmishing but don't know where to start, start here! The Delta Armory CHARLIE™ Full Starter Pack includes the DA-B04, a lightweight, pre-upgraded M4/AR-15 AEG with a sneaky style, two additional mid-cap magazines and everything else you need to get busy in game!

The set includes the DA-B04, 2 extra 140rnd Mid-caps, a Tactical Vest, a pair of NUPROL Pro Mesh Goggles, a NUPROL Tactical Half Face Mask, a speed loader, Delta 0.25g BBs, a Ni-MH battery, charger & a Battery charging bag; giving you everything you need to get off to a flying start on your Airsoft adventure. We recommend a Gun Bag or Hard Case to transport your pride and joy and some good footwear, but other than that, you are good to go! 

If you're looking for a modernised full-metal M4A1, the DA-A02 ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts some great internals, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 18:1 steel gears and a 6.03mm tightbore inner barrel.

On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02 ALPHA™ M4A1 RAS AEG is ideal!

If you're looking for a modernised full-metal M4A1, the DA-A02 ALPHA™ M4A1 RAS AEG from Delta Armory is exactly that. This ALPHA™ line AEG boasts some great internals, featuring reinforced internal parts from SHS, CNC aluminium cylinder group parts, CNC machined 18:1 steel gears and a 6.03mm tightbore inner barrel.

On the outside Delta has added a gunfighter mod.3 style pistol grip, the classic ALPHA™ style stock and an enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. This gives the now old-school M4A1 a bit of a facelift without ruining its iconic outline and maintaining suitability for casual and Milsim skirmishes. If you love the M4A1 silhouette but want more modern ergonomics, the Delta Armory DA-A02 ALPHA™ M4A1 RAS AEG is ideal!

If you prefer shorter AR platforms and want something full metal with a realistic weight, the Delta Armory DA-A13 ALPHA™ 8" M-LOK M4/AR-15 AEG is one of the best options out there. Equipped with an M-LOK handguard constructed from CNC machined aluminium, the unique Delta Armory receiver, an ergonomic pistol grip and a pre-installed aluminium angled foregrip, you have little left to do on the outside other than add your favourite optic!

Inside, we're also remarkably well-equipped! Inside, we have a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving you impressive performance and advanced features for a respectable price point. If you like your ARs as cutting edge on the inside as they are on the outside, the Delta Armory DA-A13 ALPHA™ 8" M-LOK M4/AR-15 AEG should suit you perfectly!

This is not an AK, I repeat this is not an AK variant! It may share some silhouette similarities but the VZ.58 is a unique platform that was the standard service rifle for the Slovakian military from 1959 to 1984. This Delta Armory replica is licensed by the Real Steel Firearms company Czech Small Arms which is the only manufacturer of SA VZ.58 rifles. The DA-VZ58 is based on the SA VZ.58 Sporter Carbine except with a longer outer barrel. The trademarks to indicate this can be found on the AEG.

Internally, the Delta Armory DA-VZ58 CSA VZ.58 "Kosa" AEG features some of the high-quality pre-upgraded Delta Armory internals such as an EFCS programmable MOSFET 18:1 ratio steel gears, a quick change spring system, a unique gearbox design and a high torque motor. The EFCS MOSFET allows the fire modes to be reprogrammed for burst modes and semi-auto only using the Ares EFCS programmer (available separately) and also features a low-voltage cutoff function, protecting your battery from being damaged if the voltage drops too low.

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 25mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System. Keeping your scope close to your rail is good for seeing exactly where your BBs go after firing them.

Being a two-piece design, and coming included with an Allen Key, they are very easy to install. The scope rings mount to standard 20mm Picatinny rail sections. To attach them to your rifle scope you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

If you want to start your Airsoft journey with something that shoots a little better than the usual beginner platform, this bundle is ideal. The Silent OPS CQB Bundle is based around the pre-upgraded DA-B03-ETU with its integral suppressor, hybrid aluminium/high-density polymer build and programmable fire controls including burst mode, pre-cocking and binary trigger. 

We paired the DA-B03-ETU with 2 spare mags, BBs and a speed loader so you can keep it topped up, a Red Dot Sight for fast target acquisition (lens protector recommended) and a LiPo battery, charger and charging bag to keep it fueled.

This setup would be ideal for a sneaky CQB specialist or an aggressive outdoors skirmisher who wants to start with the edge over other newcomers. The DA-B03-ETU is a cut above standard beginner AEGs thanks to its electronic trigger unit which gives it a frightening semi-auto trigger response and killer rate of fire!

If you're after an MK18 and a full complement of accessories, this is what you need! The Delta Armory MK18 BRAVO™ Binary Bundle pairs the Delta Armory DA-B15-ETU MK18 with 2 extra magazines, a red dot sight (lens protector recommended), BBs, a speed loader, LiPo battery, charger, and a battery charging bag, giving you everything you need to get going with a slick Military style setup!

This bundle is named for the Binary Trigger function of the pre-installed ETU system inside the MK18, though it can also provide burst mode and pre-cocking for a faster trigger response. If you do a mix of indoor and outdoor skirmishing, this setup will see you well-equipped!

If you're looking for a pouch that covers both your primary and sidearm, the Delta Armory MOLLE AR/Pistol Tactical Combo Pouch is the one for you! This pouch features a section for both a standard M4 magazine and a pistol magazine, so you can make sure your loadout is covered with one convenient pouch. This pouch mounts to MOLLE making it compatible with chest rigs, plate carriers and tactical belts.

The top of the pouches are open, and the magazines are held in place using bungee pressure retention, meaning magazines can be quickly and effortlessly removed during tactical reloads, and placed back in the pouches easily without using any noisy Velcro or press studs. 

If you're looking for a handy way to store magazines for both your platforms on the battlefield, the Delta Armory MOLLE AR/Pistol Tactical Combo Pouch is exactly what you need!

If you're looking for a pouch that covers both your primary and sidearm, the Delta Armory MOLLE AR/Pistol Tactical Combo Pouch is the one for you! This pouch features a section for both a standard M4 magazine and a pistol magazine, so you can make sure your loadout is covered with one convenient pouch. This pouch mounts to MOLLE making it compatible with chest rigs, plate carriers and tactical belts.

The top of the pouches are open, and the magazines are held in place using bungee pressure retention, meaning magazines can be quickly and effortlessly removed during tactical reloads, and placed back in the pouches easily without using any noisy Velcro or press studs. 

If you're looking for a handy way to store magazines for both your platforms on the battlefield, the Delta Armory MOLLE AR/Pistol Tactical Combo Pouch is exactly what you need!

If you're in search of a new CQB platform or a compact PDW-style AR for your quick and slick playstyle, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG should be high on your list of options. This full-metal M4 platform boasts an extremely compact front end, ideal for close-quarters skirmishes or woodland warriors who prefer to move fast with a bite-sized M4 with full-sized firepower. 

Being an AEG of the ALPHA™ range, this beast boasts pre-upgraded internals and a high-quality metal receiver paired with a  CNC aluminium handguard and micro suppressor. Inside, you will find a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness despite its short overall length. 

If your aim is to refute the "size matters" philosophy and prove it truly is how you use it, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG is the perfect AEG to do it!

If you're a CQB specialist or a fast-moving outdoors skirmisher seeking an M4 platform with a sneaky aesthetic, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG is one to watch. Being an AEG of Delta's ALPHA™ line, this beast boasts a CNC aluminium quad-rail handguard, aluminium suppressor and the unique Delta Armory billet-style receiver, giving it a cutting-edge, brutal look with plenty of accessory options built in. 

Inside, you will find the usual complement of Delta Armory pre-upgraded internals, including a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The 18:1 ratio steel gearset runs on 7mm ball bearing bushings, reducing gearbox noise and friction. 

Focussing on long-term reliability, the DA-A04's internals are well suited to new skirmishers or experienced Airsofters looking for a reliable backup or starting point for a custom build. If this sounds like you, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG will serve you well!

Whether you're new to the game and looking to start out with a full metal platform bristling with advanced features or a veteran skirmisher in search of an M4 AEG you can just pick up and go with, the Delta Armory DA-A06 ALPHA™ KeyMod 10" M4/AR-15 AEG is a fine choice. A realistically hefty full metal build with a cutting-edge aesthetic at just the right length to do its dirty work both outdoors and in CQB, the DA-A06 ALPHA™ is ready for any challenge that faces it. 

Equipped with a KeyMod handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out with SHS reinforced parts and a 6.03mm tightbore inner barrel the DA-A06 ALPHA™ is an extremely competitive platform, both on price and performance!

If you're after a new M4 AEG but don't like to commit to a particular build direction, the DA-A06 won't make any decisions for you! Thanks to the modularity of the AR platform and the DA-A06 ALPHA™ 10" KeyMod M4/AR-15 AEG is ready to accept a full complement of accessories, kitted out just how you desire and give the enemy team the what for when it comes to skirmish day!

If a full metal AR PDW will be your next buy, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG definately deserves your attention! Rocking full metal ALPHA™ standard externals on the outside and some seriously slick technology internally, the TALOS 1 is a mean CQB machine ideal for cutting tight corners up close and personal. 

Inside, the TALOS 1 is equipped with Delta's EAGLE™ programmable MOSFET/ETU, offering a boost in trigger response and rate of fire along with programmable fire controls. Available fire modes include 3 or 5-round burst mode, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you almost too many options all of which can be programmed using the fire controls of the AEG itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the TALOS 1 far more long-range effect on target than one might expect!

Whether you specialise in CQB or prefer a short platform for aggressive outdoor play, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG will be an asset to your battlefield role. Dressed to impress on the outside with all the latest attachment interfaces, the TALOS 1 is a force to contend with; kit it out and get busy!

If you need a compact AR for CQB or a sniper's backup, the DA-B16-EGL BRAVO™ TALOS 1 PDW M4/AR-15 AEG is ideal. This beastly little AR is lightweight and extremely compact, making it ideal for fast movers and those who need a backup platform with more firepower than a pistol. Inside, the TALOS 1 has some exciting features as a bonus, giving you far more bang for your buck than its rivals!

The Delta Armory EAGLE™ programmable MOSFET is the cherry on top of a superb external build, offering the option of burst mode, binary trigger, semi-auto only, sniper delay, progressive trigger (AUG mode), precocking and trigger sensitivity adjustment. A seriously advanced bit of kit, the EAGLE™ allows you to program all of these modes using the trigger and fire selector only, with no need for apps, programming cards or other hidden costs! Also inside is a 6.03mm tightbore inner barrel, rotary HOP-up unit and the usual Delta Armory compliment of SHS reinforced internals. 

Delta's gift to those struggling with longer platforms in CQB, the TALOS 1 gives you ultra-modern externals, well-equipped internals and the perfect balance between low weight and the satisfying realism of metal parts. If you need a primary that won't slow you down with plenty of programmable fire mode options by default, the DA-B16-EGL BRAVO™ TALOS 1 PDW M4/AR-15 AEG is the one!

If you seek a compact CQB platform with a solid full metal build, the Delta Armory DA-A03-EGL ALPHA™ SilentOps CQB M4/AR-15 AEG should be on your shopping list! This ALPHA™ line AEG is equipped with Delta's latest programmable ETU/MOSFET system, known as the EAGLE™. 

The EAGLE™ transforms this already impressive little beast with a range of programmable fire modes, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only, adjustable precocking and adjustable trigger sensitivity. Being electronic, the trigger will never suffer a dreaded semi-auto lockup, making the DA-A03-EGL a fantastic CQB tool for fire supremacy. When it comes to outdoors, this little menace ain't no slouch! The pre-installed 6.03mm tightbore inner barrel and rotary HOP-up unit ensure it can still do the job when engaging targets at long range. 

A generously equipped platform with full compatibility with aftermarket V2 gearbox upgrade parts, the DA-A03-EGL is one of the best-value SBR-style AR platforms out there currently. Mobile, agile and hostile despite its realistic full-metal build, the Delta Armory DA-A03-EGL ALPHA™ SilentOps CQB M4/AR-15 AEG is ready for any challenge that awaits it!

If you're looking for a military-style SBR M4 with some slick accessories at a decent discount, this bundle was made with you in mind! The Delta Armory M4A1 Combat Ready Bundle includes the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG, a Vector Optics Maverick red dot sight, a Big Dragon SF Style Suppressor and short vertical foregrip and a pair of PTS EPM Gen.2 mid-caps to keep it well fed. 

This M4A1 CQBR is ready to rock, all you'll need to get stuck in is BBs, a speed loader and a battery. We recommend the NUPROL 7.4V 1450mAh LiPo Battery in nun-chuck configuration for an easy fit and great performance!

If you're working on a high-speed or high FPS build, the Delta Armory Version 2 CNC 8mm QSC Gearbox Shell will save you a lot of heartache in the long run! This ultra-strong version 2 gearbox shell is CNC machined from the best aluminium around, known as 7075 T651. This means if you're running a super strong spring or going for a dual-sector gear build, this gearbox shell has what it takes to keep running in the long term, being considerably stronger than standard alloy gearbox shells.

The QSC Gearbox shell also features radiused cylinder window corners to better distribute force and is pre-cut for Gate TITAN/ASTER, Perun Hybrid or Delta Armory ETU MOSFET systems, meaning no need to get the Dremel out to add advanced functionality. The bearing ports are 8mm in diameter, making this the perfect host for Bolster Armouries EZO Ball Bearing Bushings. If you're reaching for the stars when it comes to performance and want your build to last more than a few bursts, the Delta Armory Version 2 CNC 8mm QSC Gearbox Shell is what you need!

If you have mid-caps to load, you'll need one of these! The Delta Armory 100rnd Magazine Speed Loader is a thumb plunger type speed loader constructed from translucent polymer which holds 100 BBs approximately. The loader is filled via its fill window at the top and the thumb plunger can be deployed and stowed via the button on the side. 

To load an Airsoft mid-cap or low-cap, simply fill your speed loader, align the fill/feed port of the magazine with the aperture on the bottom of the loader, hold the mag and loader together and push the thumb plunger repeatedly until it becomes firm. Your mag is now filled. If you run mid-caps, low-caps or you like to use multiple weights of BB, speed loaders are essential Airsoft kit!

If your M4 needs a revamp, a new gearbox is the easiest way to do it. The Delta Armory Complete Version 2 Gearbox for M4/AR-15 AEG is compatible with almost every M4/AR-15 AEG on the market and is well-equipped with reinforced parts straight out of the gate. 

This is the same gearbox used in the Delta Armory CHARLIE™ line AEGs, boasting a quick change spring guide, 18:1 steel gears running on 7mm bushings, an SHS piston with a full steel tooth rack, an SHS reinforced tappet plate and a reinforced gearbox shell with radiused cylinder window corners. 

The pre-installed spring will provide around 380 FPS when installed, so if you plan to use this gearbox for anything other than a semi-auto-locked DMR build you will need an M100, M105 or weaker spring to keep it within site limits. Thankfully, the quick change spring system makes spring swaps a breeze! Whether you are breathing new life into an old M4 AEG or you are building an AEG from scratch, this complete gearbox will save you loads of time and messing around!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind. 

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type. 

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful!