Delta Armory Airsoft

If you're seeking a light and fast M4 platform to handle engagements at all ranges, the DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG should be right up your street. This M4/AR-15 AEG boasts an elite look on the outside, rocking a pre-installed aluminium micro suppressor, mock KeyMod handguard complete with modular rail sections and the latest and greatest stock/grip combo featured on the Delta Armory R15 FREYA™ series.

While the internals of the DA-C07-EGL are similarly equipped to the original CHARLIE™ series, the addition of the new EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price!

If you like the idea of a lightweight polymer build with the ability to run burst mode, customise trigger sensitivity and much more, the Delta Armory DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG belongs in your arsenal!

If you like the styling of real steel holographic sights, the Delta Armory Holo-551 Style Red Dot Sight is one to watch. Patterned after the real steel 551 holographic sight, the Holo-551 is the shorter alternative to the Holo-552, ideal for compact platforms with limited rail space. Boasting an integral 20mm Picatinny rail mount, red and green reticle illumination with 5 brightness levels for each colour, the Holo-551 provides the same superb utility as the Holo-552 without wasting space on your primary. 

Benefitting from a strong alloy hood protecting the delicate internals, the holographic sight design is often credited with being one of the more robust red dot designs on the market, insulating you against accidental bumps and scrapes, unlike other "open" red dot designs. If you're an aggressive, or dare we say it, clumsy skirmisher, this could save you some anguish! If you're looking for a holographic-style optic for your SMG-5, AR-9 or other compact SMG, this is the one to go for!

If you're in search of the perfect mid-range scope then you are in luck! The Delta Armory 1.5-5X40BE LPVO Rifle scope w/ Flip-up lens caps is exactly what you are looking for. This magnified riflescope is an LPVO (Low Power Variable Optic), meaning it offers variable magnification from 1.5x up to 5x, ideal for short and medium-range engagements mounted on an assault rifle, DMR or sniper rifle. 

The 1.5-5X40BE offers windage and elevation adjustment via a pair of capped turrets, along with a choice of a red, green or blue reticle with 3 brightness settings and a fast focus dial at the rear of the eyeball so you can get a clear view at different engagement ranges. With a dual ring mount for 20mm Picatinny rails, this LPVO is ready to rock straight out of the box!

If you're looking for affordable tactical gloves, Delta Armory has what you need! Constructed from a mixture of Spandex, Neoprene and synthetic leather, the Tactical Ops Airsoft Gloves boast reinforced palms and knuckles, making them great for crawling in the woods and avoiding the sting of knuckle hits in CQB. Each glove includes a carrier loop so you can attach them to your belt or rig with a carabiner and the wrist is adjustable via velcro, meaning a snug fit for all.

One of the best features of the Tactical Ops Airsoft Gloves is their touchscreen compatibility, allowing you to use your smartphone or other touchscreen device without removing them. Sizing information can be found in the "Full Description" under "Special Instructions", so make sure you measure up for the perfect fit!

If you're looking for affordable tactical gloves, Delta Armory has what you need! Constructed from a mixture of Spandex, Neoprene and synthetic leather, the Tactical Ops Airsoft Gloves boast reinforced palms and knuckles, making them great for crawling in the woods and avoiding the sting of knuckle hits in CQB. Each glove includes a carrier loop so you can attach them to your belt or rig with a carabiner and the wrist is adjustable via velcro, meaning a snug fit for all.

One of the best features of the Tactical Ops Airsoft Gloves is their touchscreen compatibility, allowing you to use your smartphone or other touchscreen device without removing them. Sizing information can be found in the "Full Description" under "Special Instructions", so make sure you measure up for the perfect fit!

If you're looking for affordable tactical gloves, Delta Armory has what you need! Constructed from a mixture of Spandex, Neoprene and synthetic leather, the Tactical Ops Airsoft Gloves boast reinforced palms and knuckles, making them great for crawling in the woods and avoiding the sting of knuckle hits in CQB. Each glove includes a carrier loop so you can attach them to your belt or rig with a carabiner and the wrist is adjustable via velcro, meaning a snug fit for all.

One of the best features of the Tactical Ops Airsoft Gloves is their touchscreen compatibility, allowing you to use your smartphone or other touchscreen device without removing them. Sizing information can be found in the "Full Description" under "Special Instructions", so make sure you measure up for the perfect fit!

If you like the lightweight nature of red dot sights but want a bit of zoom, the 2x40 Fixed Power Red/Green Dot Sight from Delta Armory will provide. This red/green dot sight offers a choice of reticle colours and 5 brightness levels for a good view of the ringed dot reticle in any ambient lighting conditions. 

With an integral 20mm Picatinny rail mount, full adjustment for windage and elevation via capped adjustment turrets and generous eye relief, the 2x40 Fixed Power is ideal for those who use an Airsoft assault rifle or SMG and want a better view of their targets at long range!

If you're in search of a magnified rifle scope but want something lighter and more compact, set your sights on the Delta Armory 4x32AOEG Illuminated Rifle Scope. Packaged with a pair of 25mm scope rings for 20mm Picatinny rails, the 4x32AOEG is ready to mount on any Airsoft gun with a 20mm top rail but is ideally suited to longer-ranged platforms such as DMRs and sniper rifles. 

Many Airsoft optics provide far more magnification than needed and a side effect of this is tremendous overall length and excessive weight. The Delta Armory 4x32AOEG gives you only what you need to get a clear sight picture at Airsoft ranges, including windage and elevation adjustment and a parallax adjustment ring surrounding the objective lens. The reticle can also be illuminated for maximum visibility, offering the choice of red or green illumination with 5 brightness settings for each colour. 

If you're the type of DMR or sniper rifle user who doesn't need an optic capable of viewing Venus to get the job done, opting instead to focus on agility and in-game functionality, this is the scope for you!

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06 CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the DA-C06 CHARLIE™ serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long-range effectiveness. 

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C06 is the best AR in this style and price range we have seen!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06 CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the DA-C06 CHARLIE™ serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long-range effectiveness. 

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C06 is the best AR in this style and price range we have seen!

If you need some hefty BBs for your upgraded setup, Delta Armory's 0.30g Diamond 6mm BIO BB are the perfect choice for outdoor skirmishing. These BBs are supplied in a 1KG resealable bag of 3333 BBs approximately and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

Being made from biodegradable materials means these BBs are suitable for outdoor skirmishing at any site in the country and great for target shooting in the back garden. These slightly heavier than standard BBs provide improved foliage penetration ability and wind resistance along with extended range in guns with upgraded HOP-ups. If you're running a DMR or an accurised platform in the great outdoors, the Delta Armory 0.30g Diamond 6mm BIO BBs are what you need to feed it!

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!

If you need biodegradable BBs for your pistol or shotgun, the 0.20g Diamond 6mm BIO BB from Delta Armory is a fantastic choice. Supplied in a resealable bag of 5000, Delta's Diamond BBs are high-grade polished 6mm BBs with tight tolerances to ensure reliable feeding and maximum accuracy potential.

If you're looking for 0.28g BIO BBs for woodland warfare, Delta Armory 0.28g Diamond 6mm BIO BBs are a fine choice. These BBs are supplied in a 1KG resealable bag of approximately 3571 BBs and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

Being made from biodegradable materials means these BBs are suitable for outdoor skirmishing at any site in the country and great for target shooting in the back garden. 0.28G BBs offer a few benefits compared to lighter weights, including extending range with the correct HOP-up setting, improving wind resistance and increasing foliage penetration potential. If you've got an outdoor skirmish booked, Delta Armory 0.28g Diamond 6mm BIO BBs are the right ammo for the job!

If you play a lot of CQB, a tactical flashlight will be an asset to your setup. The Delta Armory Defender Shield Tactical Flashlight is a highly flexible unit capable of being used as a handheld light or weapon light, packaged with a pressure switch tail cap and equipped with a push button tail cap as it comes. Also included is a 20mm Picatinny ring mount to allow you to mount it to your primary and a lanyard so you can carry it as a handheld light and avoid dropping it in wet weather.

The Defender Shield is powered by the included rechargeable18650 Lithium battery but the charger is not included. Compatible chargers can be found by putting "18650 Battery Charger" into your favourite search engine. If you're kitting out your primary for CQB or night skirmishes you need this on your primary!

If you're seeking a lightweight handguard for your sleeper build, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 is a fine choice. This handguard is styled after the real steel URX 3 handguard and is constructed from high-density polymer, keeping the price and weight to a minimum.

Known as a "mock KeyMod" handguard, the attachment slots on this handguard are not compatible with most KeyMod accessories though you do have the option of mounting 20mm Picatinny accessories to the included rail sections. 3 Rail sections are included and pre-installed but can be repositioned wherever you need them on the attachment slots at 3, 6 and 9 o'clock.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you want the style of a modern KeyMod handguard but not the weight, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 should fit the bill!

If you're looking for the middle ground between an unmagnified red dot sight and a rifle scope, the Delta Armory 2x40 Fixed Power Red/Green Dot Sight; Railed is a good shout. This red dot sight offers 2 x zoom, allowing you to get a clearer view of your targets at long range without adding too much weight to your primary. 

As with similar 1x red dot sights, the 2x40 Fixed Power railed offers the choice of either a red or green reticle in 5 different brightness levels so you can get it set perfectly for your environment. The 20mm Picatinny rail mount is integral, meaning a strong design and nothing extra needed to mount it on any Airsoft gun with a 20mm rail. Along the top and sides, we are treated to extra 20mm Picatinny rails machined into the housing, meaning you can mount extra accessories to the sight itself to save space on your handguard. 

Whether you want a bit of zoom to handle long-range threats without adding too much weight to your setup or you seek a futuristically styled optic which looks great on any sci-fi style build, the Delta Armory 2x40 Fixed Power Red/Green Dot Sight; Railed is a fine choice!

If you want to turn your version 2 gearbox-equipped AEG into a true space gun, the Delta Armory EAGLE™ Programmable MOSFET Control Unit is one of the most affordable ways to do it. The EAGLE™ is compatible with any Airsoft AEG which uses a version 2 gearbox and improves trigger response and rate of fire through its gains in electrical efficiency, amongst its many other benefits!

The EAGLE™ offers more programmable options than many of its rivals in the cheap MOSFET game. These include 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only, 5 levels of trigger sensitivity adjustment and adjustable pre-cocking, with 6 levels to choose from. Active braking can also be turned on or off and all programmable options can be set using the trigger and fire selector of your AEG, avoiding the additional expense of needing an app or PC connectivity to take advantage of the wealth of programmable options available. 

Naturally, the EAGLE™ will require a certain amount of skill and expertise to install so if this is your first time, we recommend consulting an experienced technician. Compatibility-wise, the EAGLE™ is designed for M4/AR-15 version 2 gearboxes specifically and should be compatible with most V2 gearbox shells on the market, though we have not yet confirmed whether it will work with G3 and SMG-5 platforms. If you're looking for an affordable way to add fancy features to your M4/AR-15 AEG, the EAGLE™ Programmable MOSFET Control Unit from Delta Armory is exactly that!

If your Delta Armory AEG has run into some issues relating to its charging handle, do not fear, we have just the thing for you! The Delta Armory M4/AR15 AEG Extended Charging is constructed from alloy and features a steel spring for extra durability. This is an original replacement piece for your Delta Armory platform and features an extended handle design so you can better grip it when the time comes to adjust your Hop-Up unit.

If you need to fix up your old Airsoft AEGs with charging handle issues, you need the Delta Armory M4/AR15 AEG Extended Charging Handle, get your AEGs back in skirmishing condition, it's what they deserve.

Whether you're new to the game and looking to start out with a full metal platform bristling with advanced features or a veteran skirmisher in search of an M4 AEG you can just pick up and go with, the Delta Armory DA-A06-EGL ALPHA™ KeyMod 10" M4/AR-15 AEG is a fine choice. A realistically hefty full metal build with a cutting-edge aesthetic at just the right length to do its dirty work both outdoors and in CQB, the DA-A06-EGL is ready for any challenge that faces it. 

Equipped with a KeyMod handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out with SHS reinforced parts, a 6.03mm tightbore inner barrel and the EAGLE™ programmable MOSFET on the inside, the DA-A06-EGL is an extremely competitive platform, both on price and in game! The EAGLE™ allows you to enhance trigger response with pre-cocking for CQB or select burst mode, binary trigger or AUG mode to improve hit probability outdoors, with the additional option of locking the gearbox to semi-auto only for DMR duty. 

If you're after a new M4 AEG but don't like to commit to a particular build direction, the DA-A06-EGL won't make any decisions for you! Thanks to the "Barbie for men" modularity of the AR platform and the highly flexible EAGLE™ ETU, the DA-A06-EGL ALPHA™ KeyMod 10" M4/AR-15 AEG is ready to accept a full compliment of accessories, be kitted out just how you like it and give the enemy team what for when it comes to skirmish day!

If you're looking for a MOLLE belt to expand your carrying capacity, the Delta Armory MOLLE Battle Belt is a fine choice. Made from a combination of 1000D Cordura and Nylon, this belt is adjustable to fit waist sizes from 34 inches to 44 inches, equipped with MOLLE attachment loops for pouches, holsters and other MOLLE compatible kit. The belt also features a pair of alloy glove retaining hooks which can also be used for keys or chem-lights. 

The MOLLE Battle Belt is padded for extra comfort and backed with breathable mesh, allowing airflow so you don't get too sweaty. The padding allows this belt to be fully laden with gear without becoming uncomfortable and you can also pair the MOLLE Battle Belt with a harness for further improved stability. If you're looking for a starting point for your MOLLE belt build, the Delta Armory MOLLE Battle Belt will do the trick!

If you're looking for a MOLLE belt to expand your carrying capacity, the Delta Armory MOLLE Battle Belt is a fine choice. Made from a combination of 1000D Cordura and Nylon, this belt is adjustable to fit waist sizes from 34 inches to 44 inches, equipped with MOLLE attachment loops for pouches, holsters and other MOLLE compatible kit. The belt also features a pair of alloy glove retaining hooks which can also be used for keys or chem-lights. 

The MOLLE Battle Belt is padded for extra comfort and backed with breathable mesh, allowing airflow so you don't get too sweaty. The padding allows this belt to be fully laden with gear without becoming uncomfortable and you can also pair the MOLLE Battle Belt with a harness for further improved stability. If you're looking for a starting point for your MOLLE belt build, the Delta Armory MOLLE Battle Belt will do the trick!

If you're looking for a MOLLE belt to expand your carrying capacity, the Delta Armory MOLLE Battle Belt is a fine choice. Made from a combination of 1000D Cordura and Nylon, this belt is adjustable to fit waist sizes from 34 inches to 44 inches, equipped with MOLLE attachment loops for pouches, holsters and other MOLLE compatible kit. The belt also features a pair of alloy glove retaining hooks which can also be used for keys or chem-lights. 

The MOLLE Battle Belt is padded for extra comfort and backed with breathable mesh, allowing airflow so you don't get too sweaty. The padding allows this belt to be fully laden with gear without becoming uncomfortable and you can also pair the MOLLE Battle Belt with a harness for further improved stability. If you're looking for a starting point for your MOLLE belt build, the Delta Armory MOLLE Battle Belt will do the trick!

If you're looking for an alternative to red dot sights with a long-range leaning, the Delta Armory 4x32 FPCO Illuminated Riflescope is a fantastic choice. A compact, fixed 4x magnification optic with a similar vibe to the famous ACOG series, the FPCO boasts modern styling with its piggy-back 20mm Picatinny rails and offers either red, green or blue reticle illumination. 

The reticle itself is a mildot reticle, offering vertical and horizontal stadia lines so you can lead moving targets and adjust on the fly for targets at the pinnacle of Airsoft effective range. The 4x32 FPCO is equipped with an integral 20mm Picatinny rail mount, making it ready to mount on any 20mm rail without the need to buy extra scope rings or other mounting solutions. If you want to identify and engage targets more effectively at mid to long-range, the Delta Armory 4x32 FPCO Illuminated Riflescope belongs on your gat!

If you're looking for an affordable long-range AR with a unique modern look, the DA-B12 BRAVO™ from Delta Armory is one to watch. This M4/AR-15 AEG is based on real steel LVOA-style AR-15s, boasting a 16.2-inch outer barrel and handguard along with an equally long 6.03mm tightbore inner barrel, ideal for outdoor skirmishing or a DMR build. 

Inside the DA-B12, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. 

The result is an AEG which shoots far better than one would expect for the price with full TM compatibility for the upgrade addicts. Whether you just wack a big scope on it and get to work or you build it out into a fully-fledged DMR, the DA-B12 makes a fantastic outdoors platform! 

If you're looking for a full metal AEG with great DMR potential, the Delta Armory DA-A15-EGL ALPHA™ 13" M-LOK M4/AR-15 AEG is one to watch. As with the other Delta Armory ALPHA™ line AEGs from Delta, the DA-A15-EGL boasts full metal construction with the unique Delta Armory receiver and flawless machining throughout.

Unlike the standard DA-A15, this version is rocking the EAGLE™ programmable MOSFET, offering a wide range of programmable fire modes including semi-auto only and sniper delay. Being a relatively long platform, the inclusion of the EAGLE™ makes the DA-A15-EGL a relatively easy DMR conversion, thanks in part to its quick change spring system. The EAGLE™ MOSFET's other tricks include burst modes of various durations, binary trigger, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you loads of advanced features for a remarkably affordable price.

If you like to skirmish in the great outdoors with a primary at the cutting edge of external design, bristling with accessory attachment points with full compatibility with aftermarket upgrades and an impressively advanced starting point, you'll love the Delta Armory DA-A15-EGL ALPHA™ 13" M-LOK M4/AR-15 AEG!

The Delta Armory 22mm Offset Angled Mount has an aluminium alloy construction, making it tough and lightweight. It is designed to install Torches, Lasers and other 20mm RIS Accessories at a 45-degree angle, which allows you to maximise the available space you have on your Airsoft Gun.

An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories. Although designed for torches, this rail could also be used to mount an offset Red Dot Sight to use as a backup to your main sight. The Delta Armory 22mm Offset Angled Mount easily attaches to 20mm Rails via the Allen Screw on the side of the unit.

If you've misplaced your Crane stock's butt plate, here you go! The Delta Armory Butt Plate for Crane M4/AR-15 Battery Stock is a replacement original part and should fit the vast majority of Airsoft Crane stocks, particularly those from Delta Armory, Specna Arms and Lancer Tactical. The butt plate is constructed in two parts; with the base being high density polymer and the outer coating being grippy rubber with lattice texture on its surface.

As mentioned, this should fit almost any Airsoft Crane stock out there but we haven't tested them all, so proceed with caution and remember we cannot accept returns on any butt plate that has been modified.