All Airsoft Guns

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

If you like your Hi-Capas short and well equipped, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight may be the Hi-Capa for you. This full metal GBB pistol boasts the usual VORSK compliment of pre-upgraded parts, including a flared magazine well, ported slide, extended controls and a 6.03mm tightbore inner barrel for enhanced accuracy and improved gas efficiency.

This is the "BDS" red dot sight equipped variant, giving you a pre-installed red dot sight mounted to the rear of the slide, as is the current convention for combat pistols. The red dot sight provides faster target acquisition and looks fantastic, elevating the looks of the 3.8 X Pro into the elite.

The advantages of a shorter slide, frame and barrel include reduced overall weight, faster cyclic rate thanks to reduced slide rate and a faster draw from a retention holster, shaving off a few precious milliseconds for a seriously fast draw to target execution. If this sounds good to you, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight belongs in your holster!

If you like your Hi-Capas short and well equipped, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight may be the Hi-Capa for you. This full metal GBB pistol boasts the usual VORSK compliment of pre-upgraded parts, including a flared magazine well, ported slide, extended controls and a 6.03mm tightbore inner barrel for enhanced accuracy and improved gas efficiency.

This is the "BDS" red dot sight equipped variant, giving you a pre-installed red dot sight mounted to the rear of the slide, as is the current convention for combat pistols. The red dot sight provides faster target acquisition and looks fantastic, elevating the looks of the 3.8 X Pro into the elite.

The advantages of a shorter slide, frame and barrel include reduced overall weight, faster cyclic rate thanks to reduced slide rate and a faster draw from a retention holster, shaving off a few precious milliseconds for a seriously fast draw to target execution. If this sounds good to you, the VORSK Hi-Capa 3.8 X Pro GBB Pistol w/Red Dot Sight belongs in your holster!

If you fancy trying the sniper playstyle and you are into your military platforms, the CYMA CM.702 M24 should suit you perfectly. This spring bolt action sniper rifle is based on the real steel M24 SWS, the primary sniper rifle of the US Army and many Law Enforcement agencies in the US. The M24 marries the classic bolt action sniper rifle styling with enhancements which set it apart from VSR-10-based rifles, including its M700 style "long action" and its adjustable stock.

The CYMA CM.702 is based on the Classic Army CA/M24 internally and boasts a 6.03mm tightbore inner barrel straight out of the box, hitting out at an impressive 500FPS +/- 10% using 0.2g BBs. Packaged with a 14mm CCW male thread adapter and with a bipod lug and scope rail built-in, the CM.702 is ready to be kitted out with whatever you need to complete your mission!

A Gas Blowback Airsoft Pistol from NUPROL, this EU-Series RAVEN series EU17 is a semi automatic pistol which runs on green gas for added realism by simulating recoil by adding kick to each shot. The pistol is highly customisable and supports a wide range of aftermarket attachments and upgrades allowing you to make the pistol truly your own.

This variant is the "BDS" model, fitted with a slide-mounted red dot sight straight out of the box, improving target acquisition speed and giving this militant platform an elite look. 

If you love the comfort, reliability and compatibility of the EU-Series pistols, and want something that will stand out from the crowd, then the EU17 is a sure choice. This pistol is one of the most cost-effective sidearms you can run in Airsoft!

A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range. The weapon is constructed with a lightweight and durable Polymer Lower Frame and an Alloy Slide, making it a Lightweight yet Durable sidearm.

If you are looking for a lightweight beginner's AEG, this could be it! The LT-19 from Lancer Tactical comes out of the box remarkably well equipped, featuring a quick change spring system and a tight bore inner barrel with rotary HOP unit. In the package, you will find almost everything you need to get skirmishing, including a set of flip-up iron sights, KeyMod rail sections, a micro suppressor, and a battery extension unit for the PDW stock!

If you want to sample Airsoft sniping without getting in too deep, this bundle is for you! The M52 Sniper Rifle Bundle includes the Double Eagle M52 spring bolt action sniper rifle, two spare 27rnd M52 magazines, a Strike Systems 4x32 Rifle Scope, VORSK 0.28g BBs and an Evolution hard case to keep everything tidy. 

The M52 is a great platform as a first sniper rifle and is ideal for new skirmishers with less physical strength, being an ultra-light build with an easy and smooth bolt pull. Strike Systems' 4x32 Rifle Scope is its ideal companion, offering enough magnification for long-range spotting and engagement without being overly bulky or heavy. Having spare magazines will keep you in the fight for longer, and Evolution's hard case will keep the setup protected during storage and transportation to and from a skirmish site. 

If you have your sights set on becoming an Airsoft sniper but you don't want to sink loads of money in before sampling the playstyle, the M52 Sniper Rifle Bundle is an affordable way to get your eye in before taking the plunge on a far more expensive platform!

This lightweight and incredibly effective Airsoft Electric Gun is powered by a Battery in the Stock, and features Double Eagle's Fire Control System, which allows for programmable Trigger Modes (including Binary Fire), as well as giving you excellent Trigger Response. The package is completed by a Quick Change Spring System, making it suitable for just about any field! If you want to be light on your feet and as effective as all the 'modded/custom guns' without having to break the bank, the Double Eagle M904 Falcon Fire Control Series are the perfect choice.

If you like the integrally suppressed AR look but want something pre-upgraded with more competitive internals than the average, the Delta Armory DA-C05-ETU CHARLIE™ M4/AR-15 Silent Ops 7 AEG is the one. This is the ETU-equipped version of the DA-C05 Silent Ops 7, boasting the same strong high density polymer build but with the best internals Delta has to offer currently.

Inside, we are treated to a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, a high torque motor and a programmable ETU/MOSFET system to keep it all in check. The ETU also allows for burst mode and binary trigger to be programmed in, along with pre-cocking for an almost instantaneous trigger response

This marriage of a lightweight beginner-friendly build with top-notch internals makes this a beast of a backup AEG, and perfect for a new or younger skirmisher who seeks no compromise when it comes to performance. If sneaky ARs are your thing, the DA-C05-ETU Silent Ops 7 will see you well-equipped!

If you are a fan of bullpup rifles and you don't have an AUG in your collection you are missing out! The Army Armament KU905 AUG Full Rail AEG is a unique modern take on the famous AUG assault rifle which has served with the militaries of Austria, Australia and New Zealand, and was also wielded by Karl, mercenary companion to Hans Gruber during their attempted take over of Nakatomi Headquarters in the 1988 movie Die Hard. 

The KU905 boasts full metal construction, a pre-installed MOSFET and a quad-railed handguard with an integral suppressor, and is a more modern iteration of the AUG with plenty of 20mm rails on the stock/chassis for the addition of accessories. If you need an AUG that can be kitted out like an M4 and has a unique look as a bonus, the KU905 will do everything you need it to! 

The pinnacle of high quality & authentic airsoft replica's is here, UMAREX Presents the GLOCK 34 Gen4 Co2 Deluxe Kit. If you're a firearm fanatic who's mad about getting as close to the real deal as possible, you've come to the right place.

A high end SMG 45 at a great price. An absolute pleasure to hold in your hands and stands out by a mile from cheaper models by far.

If you are a real Dragunov fan, nothing beats steel and real wood! The CYMA CM.057 is widely known to be the best replica of the iconic Dragunov SVD DMR rifle and this version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first issued. The CM.057 boasts full metal construction with a large proportion of steel in its build, giving it a reasonable and realistic weight without making this Dragonov a drag (hehe) to carry around all day!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD a great base platform for a DMR build. If you are after a long-range platform and want something with hints of modernity combined with the retro looks of real wood, the CM.057 should be at the top of your list!

H&K fans and US Army milsimmers, get excited now! The Umarex Heckler & Koch M110A1 SDMR AEG is the flawless DMR replica you've been waiting for! Based on the real steel HK M110A1 SDMR, an accurised HK417 derivative issued to the US Army as its latest marksman's rifle, the Umarex M110A1 boasts attention to detail bordering on the extreme and is pre-built as a semi-locked DMR hitting out at an impressive 410 FPS +/- 10% on 0.2g BBs.

On the outside, we are treated to a full metal build with a perfect replica of the issued Geissele SMR handguard, the latest H&K furniture and detailed H&K markings across the design, resulting in a breathtaking build which needs nothing but a scope and suppressor to be complete. Internally, the SDMR is rocking a 6.03mm tightbore inner barrel and an M120 spring, giving us superb consistency and efficiency straight out of the box. An in-line MOSFET provides a snappy trigger response thanks to improved electrical efficiency and protects the trigger contacts from corrosion in the long term.

If you're looking for your dream DMR and are the type that appreciates attention to detail, the Umarex M110A1 SDMR will be your new favourite replica. Even more so if you're into your modern US Army equipment!

A Polymer gas blowback B9 replica, which has the best of both worlds in regards to good gas efficiency from a Polymer build, as well as some good weight in the hand thanks to metal reinforcement.

A great quality straight pull spring bolt action SVD sniper rifle, the AGM SVD-M is constructed entirely from alloys everywhere the real SVD is! This thing shoots very hot to boot, so make sure you check with your local site before taking this bad boy to a skirmish!

An Airsoft 6mm BB firing electric AEG designed in the style of the MP5 used by Special Forces around the world. Featuring a lightweight and durable Polymer external construction, this a RIF for those who like to stay light and fast on their feet.

If you're seeking an entry point into the world of Airsoft sniping, this bundle was made with you in mind! We paired the ASG M40A3 McMillan Sniper Rifle SportLine finished in pre-two tone blue with a spare magazine, a Delta Armory 3-9x40 Rifle Scope, a 1KG bag of Delta's Diamond 0.32g BBs and a Swiss Arms Bipod with a tasty discount as a bonus!

Whether you're trying your hand at sniping on the skirmish field or you just want to shoot targets in the garden, the M40A3 McMillan Starter Sniper Setup will definitely put a smile on your face!

A Gas Blowback Airsoft 6mm BB Gun, based on the Hi-Capa 5.1 Range of Pistols, with a more unique design and is part of WE's WET Force Series. 

If you are building a DMR rifle but need something that fits in with rebel, OPFOR and PMC style loadouts, a G3A3 would make the perfect base gun. The JG T3-K3 is a full sized G3A3 replica constructed with a polymer receiver, stock, handguard and trigger group with an alloy outer barrel, keeping the hefty G3A3 design suited to being carried all day. This G3A3 sports the classic olive drab German issue military furniture, an HK claw mount compatible receiver and fixed stock with a massive battery compartment, making it ready to do its business out in the woodland site. 

A custom Airsoft 6mm BB Gun with a brand new slide and a unique lower frame, with tonnes of extra added features to greatly improve the pistol and increase the users effective capabilities.

This compact and awesome Gas Powered Shotgun by Golden Eagle is a TM-Compatible Shotgun that accepts Airsoft Shotgun Shells and fires three or six BBs with each pump. If you're looking for a Full Metal Gas Shotgun to absolutely devastate CQB arenas with, then the Type 870 AOW is the way to go.

The tactical option for MP5 lovers far and wide; whether you want to attach the included foregrip or your own optics, torches, lasers this Airsoft 6mm electric powered replica has you covered.

If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!

If you're seeking an SA80 to complete your Squaddie kit, the WE L85A2 SA80 Replica GBBR is as realistic as they come! This full metal gas blowback rifle is constructed predominantly from stamped steel with an alloy outer barrel and olive green polymer furniture; a fantastic match for the real steel L85A2 as it was originally issued to the British Army.

Whether you're getting involved in Milsim skirmishes or want a realistic platform for training, movie making or display, the WE L85A2 is the one to go for. It kicks like a mule, operates almost exactly like the real thing and is made with the same proportions of metal to polymer as the real deal.

Compatibility-wise, the L85A2 takes WE Open Bolt M4/AR-15 magazines and VSR/GBB type inner barrels and HOP-up rubbers, meaning mags are common and a reliable design and you have access to some of the best aftermarket barrel and HOP-up bucking combos so you can maximise your accuracy and range potential. If you like to challenge yourself in game with 30-round mags, shoulder-thumping recoil and a realistic manual of arms, the WE L85A2 SA80 Replica GBBR is the way to go!

UMAREX presents one of the most iconic firearms of the modern age, the Heckler & Koch HK416. This is a gas blowback 1:1 Airsoft replica of one of the most iconic weapon platforms of all time. Fully licensed with full metal construction that comes complete with all of H&Ks trademarks and features, ready to skirmish at the highest level with incredibly satisfying gas blowback and recoil in both semi and full auto.

This new model is the gen 3 variant, which features up-to-date internal revisions including system stability and upgraded firing pin, hammer system, parts of the lower receiver and ease of HOP use for a second to none combat experience and reliable gas platform.

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

This, the Deluxe Pack includes a 4-16x44 illuminated riflescope with sunshade, a one-piece spirit level scope mount, a 14mm CCW threaded suppressor made from carbon fibre and a superb quality carry case which fits all these generous extras inside with a neat and professional look. 

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

This, the Deluxe Pack includes a 4-16x44 illuminated riflescope with sunshade, a one-piece spirit level scope mount, a 14mm CCW threaded suppressor made from carbon fibre and a superb quality carry case which fits all these generous extras inside with a neat and professional look. 

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

A non-blowback Airsoft 6mm BB Electric Pistol which is based upon some of the World's most popular pistols, with all of the best bits taken and combined to create one unique pistol which is highly ergonomic.