WELL MB-01 Warrior I Sniper Rifle

Well
Code: …
£149.99
  • Two Stage Trigger
  • Adjustable Cheek Rest
  • Realistic Alloy & Polymer

A spring powered 6mm Airsoft BB bolt action sniper rifle featuring realistic alloy and polymer materials and an adjustable cheek rest, based on the Accuracy International Arctic Warfare sniper rifle, known to many as the British Army's L96A1. 

Full description

Help
Size guide

Description

Just like the real rifle that the MB-01 is inspired by, the stock of the MB-01 is made from lightweight polymer, with the barrel, reciever and bolt constructed from realistic and durable alloy. The stock of the weapon features an adjustable rubber butt pad and cheek plate, which allows users to adjust the weapon to be comfortable for them to use. The stock also has sling points located at the front and rear, in addition to a quick detach (QD) universal bipod mount point at the front of the rifle.

The rifle assembly features a large easy to grab bolt handle which has a smooth operating action, and the trigger group, which uses a two stage trigger design. The upper surface of the receiver has a 20mm RIS rail, allowing the attachment of optics and scopes for long range accurate shooting. 

The muzzle of the outer barrel has a removable end cap, which allows the attachment of a suppressor adaptor for the fitting of Airsoft suppressors to customise or quieten the Airsoft gun. The MB-01 has an adjustable Hop-Up system, which is accessible via the underside of the gun. The dial Hop-Up system can be adjusted in the field, and allows users to modify the range and accuracy performance of their Airsoft gun. This is the perfect rifle for those looking to get into sniping without a big budget price tag, especially any Airsofters wanting to go for a British military sniper set up.

Features

  • Top 20mm scope rail
  • Left / right front and rear sling loops
  • Adjustable cheek rest and butt pad
  • Front QD universal bipod mount point
  • Two stage safety trigger
  • Large easy grab bolt handle
  • Thumb hole stock
  • Easy and smooth bolt operation
  • Removable barrel cap for attaching suppressor thread adaptor
  • Lightweight polymer body
  • Ambidextrous magazine release

Package Includes

  • MB-01 Sniper Rifle
  • Magazine
  • Sling
  • Speed Loader
  • Un-jamming Rod
  • Instruction Manual

Special Instructions

When assembling the MB-01 Warrior I Sniper Rifle it is important that the rearmost screw in the stock is not over tightened. We suggest tightening the screw until it is hand tight but not cranking it down as this can often cause damage to the cylinder and render the rifle inoperable. 

Please note this weapon is supplied split into two sections, the barrel and the stock; simply slide the two sections together and secure using the screws in the stock. Should you need help feel free to call us on: 01484 644709.

Specification

General

Weapon Construction External
 Weapon Type
Sniper Rifle
Over 18 Only Icon
 Over 18
Yes
Icon UKARA - United Kingdom Airsoft Retailer Association
 Defence / UKARA Required
Yes, No,
FPS Icon
 FPS (Feet Per Second), using 0.20g BB
Approx. 458fps ± 10%, using 0.20g BB
Site Legal Icon
 Site Legal, using 0.20g BB
Yes
Screwdriver Icon
 Pre-Built
No
Package
 Included Items
  • Magazine
  • Cleaning Rod
  • Speed Loader
  • Basic Sling
Skill Level Icon
 User Skill Level
Regular Player
Patrol Base - Warning Icon
 Warnings
Does not come Pre-Built

Construction

Colour Wheel Greyscale
 Primary Colour
Black, Tan , Olive Green ,
Colour Wheel Greyscale
 Secondary Colour
Black
Two Tone Icon
 Pre Two-Toned
No
Construction Icon
 Construction
Polymer stock with Alloy outer barrel, bolt housing, pins, screws and internals
Weapon Construction External
 External Construction
Polymer
Alloy
Gearbox Icon
 Internal Construction
Polymer
Alloy

Weapon Specific

Power Source Icon
 Powered By
Spring
Blowback Icon
 Blowback
None
Weapon Platform
L96 / AWM
Magazine Style Icon
 Magazine Style
L96
Fire Select Icon
 Fire Selector
Patrol Base | Fire Select - Semi Automatic
 Semi Automatic
Weapon Safety Features Icon
 Safety Features
Two Stage Trigger
Shooter Configuration Icon
 Shooter Configuration
Right Handed
Weapon Configuration Icon
 Weapon Configuration
Bolt Action
Weapon Scale Icon
 Weapon Scale
1:1
Suggested BB Weight
0.4g

Hop-Up

Hop-Up Unit Icon
 Hop-Up Unit
Yes
Hop-Up Unit Adjuster Icon
 Hop-Up Adjuster
Grub Key
Hop-Up Unit Location Icon
 Hop-Up Location
Adjustable in front of mag release via Allen key

Furniture

Weapon Furniture Icon
 Furniture
  • Railed Receiver
  • Ambidextrous Magazine Release
Rail System Icon
 Rail System
20mm RIS / RAS
Icon Stock Positions
 Stock Setting
Fixed
Weapon Length Extended
 Stock Positions
1 Position
Sight Type Icon
 Sight Type
None
Sling Plate Icon
 Sling Options
Loop

Barrel

Icon Thread Type
 Outer Barrel Thread Type
Female

Magazine Specific

Magazine Type
Low Capacity , Sniper Rifle,
Magazine BB Capacity
Approx. 30 Rounds
Magazine BB Fill Method
Speed Loader
Magazine BB Fill Location
Top

Product Testing Data

Notepad Icon
 Test Description
Using 0.20g BB
Notepad Icon
 Test Date
24/06/16

Size guide

Joule Charts

Special Instructions

These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.

FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.

Tap the tabs below to open the relevant chart for your replica.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
325 0.98 1.23 1.37 1.47 1.57 1.77 1.96 2.11 2.21 2.45
328 1.00 1.25 1.40 1.50 1.60 1.80 2.00 2.15 2.25 2.50
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
335 1.04 1.30 1.46 1.56 1.67 1.88 2.09 2.24 2.35 2.61
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
345 1.11 1.38 1.55 1.66 1.77 1.99 2.21 2.38 2.49 2.76
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
355 1.17 1.46 1.64 1.76 1.87 2.11 2.34 2.52 2.63 2.93
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90
420 1.64 2.05 2.29 2.46 2.62 2.95 3.28 3.52 3.69 4.10
430 1.72 2.15 2.40 2.58 2.75 3.09 3.44 3.69 3.86 4.29
440 1.80 2.25 2.52 2.70 2.88 3.24 3.60 3.87 4.05 4.50
450 1.88 2.35 2.63 2.82 3.01 3.39 3.76 4.04 4.23 4.70
460 1.97 2.46 2.75 2.95 3.15 3.54 3.93 4.23 4.42 4.91
470 2.05 2.57 2.87 3.08 3.28 3.69 4.10 4.41 4.62 5.13
480 2.14 2.68 3.00 3.21 3.42 3.85 4.28 4.60 4.82 5.35
490 2.23 2.79 3.12 3.35 3.57 4.02 4.46 4.80 5.02 5.58
500 2.32 2.90 3.25 3.48 3.72 4.18 4.65 4.99 5.23 5.81
510 2.42 3.02 3.38 3.62 3.87 4.35 4.83 5.20 5.44 6.04