VORSK CS Hi-Capa 5.1 Vengeance; Pre Two-Tone V-Blue

The VORSK CS Hi-Capa Vengeance has been around before, but this is the "Match Edition" in Pre Two-Tone V-Blue, boasting the same styled-up externals as the original but finished in stylish metallic blue. The V-Blue colour finish also makes this little beast VCRA compliant, meaning no need for UKARA and no wait for a Two-Tone paint finish!

The Vengeance boasts full metal construction, a pre-installed 14mm CCW male thread adapter, flared magazine well and extended controls, making it a fantastic choice for those who want to jump in with an ergonomically advanced Hi-Capa without incrementally building your own from a more basic platform.

Starting at the front, we can find a straight profile 5.1-inch spiral fluted outer barrel with female 12mm CW threading at the tip, finished in black. The spiral fluting slightly reduces overall weight but its main purpose is to add to the customised styling of the Hi-Capa Vengeance, pairing perfectly with its other styled-up externals. 

Mounted to the 12mm CW female threads, we are treated to a 14mm CCW male thread adapter with the VORSK unique thread protector pre-installed. The thread adapter is finished in VORSK's metallic V-Blue, pairing nicely with the V-Blue finish on the trim parts and slide. Removing the thread protector allows you to kit the Vengeance out with a tracer unit or suppressor for the sneaky look or an instinct-aiming advantage in CQB. The thread adapter can also be removed if you prefer a more "stock" look for your stylish Hi-Capa. 

The slide of the Hi-Capa Vengeance has a much more dynamic look than your usual Hi-Capa thanks to a combination of front and rear slide serrations, angled weight reduction ports and the swept-back front end. This fits in well with the aesthetic of VORSK platforms and also improves wet weather handling qualities, allowing you to rack the slide from the front or the rear, depending on your preference. The weight reduction ports will speed up the slide cyclic rate slightly and are small enough that dirt and debris ingress should not be a problem.

At the top of the slide, we are treated to a very thoughtful and modern iron sight setup. The front sight blade contains a green light-enhancing insert, and the rear sight is an adjustable flat notch type with anti-glare texturing. This combination of sights is easy to acquire and align and eliminates the possibility of mixing up the sight dots, as is possible with a white dot sight setup. The anti-glare texturing on the rear sight notch prevents the sight from being difficult to use in bright sunlight, which works well with the bright green front sight insert. The rear sight can be adjusted for elevation using the adjustment screw on the top and for windage using the screw on the right side of the sight.

At the rear of the slide, we can find more serrations on either side to provide optimal grip when cocking the pistol. These are especially useful in wet weather, and the depth of these serrations allows a good grip even when operating the Vengeance while wearing gloves. These serrations are swept back at an angle which matches that of the front slide serrations and VORSK trademark window, giving the pistol a mean, dynamic look. The pistol's hammer can be found at the rear of the slide, attached to the frame, and is a skeletonised design with a textured section to provide positive control for when the hammer needs to be manually cocked.

On each side of the slide, we are treated to flawlessly engraved VORSK markings, reading "VORSK CUSTOM SHOP" on the left side, and "VENGEANCE" on the right. This really adds to the overall style of the pistol, and though these markings may not be based on a real steel design, you would be forgiven for thinking they were thanks to the tasteful, discrete engravings which mimic those of real steel competition pistols perfectly.

Next up, we reach the frame of the pistol, which is constructed in standard Hi-Capa fashion; with a metal upper frame containing the internal parts and a lower pistol grip/trigger guard module made from polymer. The upper frame of the Hi-capa Vengeance includes an extended 20mm Picatinny rail, with five slots of available attachment space which is absolutely perfect for a tactical flashlight or laser aiming module designed for use on a pistol.

The slide catch/disassembly lever is located on the left side of the pistol and has a slight extension to its upper surface with serrations for extra grip, providing assurance that you can operate this control effectively from a firing grip with no risk of slipping off and slowing down your reload.

The adjustable HOP-up is accessible when the pistol is field-stripped, located on the outer barrel as we would expect for a GBB pistol based on Tokyo Marui's designs. To field strip the Vengeance, first remove the magazine, then rack the slide so the hammer is back. With this done, pull the slide back until the rear of the slide lock/release aligns with the semi-circular cutout on the slide, just to the rear of the slide locking cutout. With the slide held in this position, push the slide lock through from the right side, after which the slide can be removed from the front of the pistol. The gear HOP-up adjuster is on the bottom of the outer barrel, ready to be adjusted for your chosen ammo weight, looking for the flattest possible trajectory.

To the rear of the slide release catch, we can find the manual safety which is ambidextrous and sits comfortably within reach of the shooter's thumb when holding the pistol in a firing grip, whether you are right or left-handed. This safety allows the Hi-capa Vengeance to be carried "cocked and locked" safely, with only a very slight movement required to remove the safety before taking the shot. Also included is the hallmark 1911/Hi-capa beavertail grip safety, which protrudes slightly from the rear of the grip. This safety ensures the pistol can only be fired when it is properly gripped, preventing accidental discharges.

The magazine release can be found just below the slide release catch and is an extended design with a prominent textured button so you never miss the release at a critical moment. This is of great benefit for a competition shooting pistol and can be an asset to any skirmisher who values a swift and easy reload with their sidearm.

At the bottom of the grip, we can find the magazine well extension, providing a wide flare to assist in reloading when you are pushing yourself to maximum speed, or you are positively shaking with adrenaline. The mag well extension is constructed from alloy and is the same style as the one used in the JW3 pistol, complete with a cutout on either side to allow you to grab the mag for a retention reload. This characteristic is what separates this mag well extension from those present on competition style Hi-capas, as does the lanyard loop present in the rear of the extension.

The pistol grip/trigger guard module of the Hi-capa Vengeance is a one-piece unit, as it is with other Hi-Capa pistols. The grip itself features circular imitation stippling which adds to the pistol's custom look and provides effective and comfortable grips whether you wear gloves in game or not.

The trigger guard includes undercuts to provide an area for your support hand to index, giving you the best chance of achieving a consistent grip every time you draw the Vengeance. This will cut down the time from draw to first shot, and encourage proper handling of the pistol. Undercuts are usually something which requires some serious elbow grease to add; its always nice to see VORSK treating us to the very best handling features in such an affordable Hi-Capa platform!

The trigger itself is a skeletonised design, styled similarly to the hammer, including linear texturing on its frontal surface to promote a consistent trigger pull and prevent your finger from sliding around and pulling shots off during strings of rapid-fire. The trigger, as with many other Hi-capa and 1911 variants, has a very small amount of uptake before you get to the wall, and resets with a satisfying audible and tactile click with practically no overtravel. The trigger is what makes real 1911 and Hi-capa pistols so popular with competition shooters, and fortunately for Airsofters, this perk has translated over well to the Airsoft equivalents! If you are shooting for speed, whether in a skirmish or for target shooting, you can't do much better than a Hi-capa trigger!

If you are new to the game and want a sidearm that stands out, is full metal and has a cheeky 6.03mm tightbore thrown in, the VORSK Hi-Capa 5.1 Vengeance is ideal. With ergonomic upgrades which, if bought separately, total more than the price of the Vengeance, this has to be one of VORSK's most generous offerings yet!

Features

• Full metal construction
• Pre Two-Tone V-Blue finish - Stylish metallics, no UKARA needed!
• 6.03mm Tightbore inner barrel - Great accuracy potential
• 12mm CW Female threaded outer barrel - 14mm CCW Male thread adapter pre-installed
• VORSK Custom thread adapter pre-installed - Remove it to mount a 14mm CCW suppressor or tracer
• Spiral fluted outer barrel with .45 ACP engraving - Stylish custom looks straight out of the box!
• Green light enhancing front iron sight - Easy to pick up in low light, great for instinct aiming
• Ported slide - Weight reduced, gives you a glimpse of the spiral fluted outer barrel
• Front and rear slide serrations - Swept back in classic VORSK style, improves wet weather handling
• VORSK Engraved trademarks on the slide - "VORSK CUSTOM SHOP" on the left, "VENGEANCE" on the right
• 20mm Picatinny frame rail - Nice long rail, plenty of room for an aiming laser or tactical flashlight
• Gear adjustable HOP-up unit - Accessible when the slide is removed
• Skeletonised trigger and hammer - Adds to the custom styling and reduces overall weight
• Enlarged magazine release - Prominent textured button, easy to find under pressure
• Ambidextrous manual safety catch - On the rear of the frame, accessible for left or right-handed shooters
• Extended slide release lever - Easily within reach when the pistol is held in a firing grip
• Beavertail grip safety - Prevents the pistol from being fired when gripped incorrectly
• Flared magazine well - Allows for easier "eyes-up" reloads, suits the Match aesthetic perfectly
• Textured pistol grip - Grippy and comfortable with or without gloves
• Compatible with VORSK and RAVEN Hi-Capa 5.1 magazines

Package Includes

• VORSK CS Hi-Capa 5.1 Vengeance; Pre Two-Tone V-Blue
• 28rnd Green Gas Magazine
• User manual
• PVC patch
• Spare nozzle