Valentines Day 2021: Cool bits under £50

An Airsoft Dot Sight created by THETA OPTICS, designed to be fit onto 20mm RIS / RAS Rails, and allows the user to acquire their targets quicker and more easily over traditional ironsights. This sight has the added boon of being raised, meaning that the sight is easier to use for Airsoft players who wear full face protection or lower mesh face masks, lifting the sight high enough to allow you to cheek weld even when wearing a mask.

The sight is fully adjustable, allowing windage and elevation to be set, as well as brightness and dot colour, with up to 5 brightness settings for both green and red dot modes.

This sight is perfect for any Airsoft skirmisher who is looking for a great quality red dot for their Airsoft replica without breaking the bank. The sight is great for outdoors thanks to its high brightness settings, and can be used in CQB easily by simply dropping the brightness levels to 1-2.

An Airsoft Dot Sight created by THETA OPTICS, designed to be fit onto 20mm RIS / RAS Rails, and allows the user to acquire their targets quicker and more easily over traditional ironsights. This sight has the added boon of being raised, meaning that the sight is easier to use for Airsoft players who wear full face protection or lower mesh face masks, lifting the sight high enough to allow you to cheek weld even when wearing a mask.

The sight is fully adjustable, allowing windage and elevation to be set, as well as brightness and dot colour, with up to 5 brightness settings for both green and red dot modes.

This sight is perfect for any Airsoft skirmisher who is looking for a great quality red dot for their Airsoft replica without breaking the bank. The sight is great for outdoors thanks to its high brightness settings, and can be used in CQB easily by simply dropping the brightness levels to 1-2.

If you are looking for some face protection but can't abide by mesh masks with their straps, the Shadow Fighter Mesh Mask was designed with you in mind! Providing a sweat-wicking breathable balaclava style hood with steel mesh reinforcement around the nose and mouth, this mask is ideal for winter skirmishes and intense CQB. The mask being integrated into a balaclava style design helps take the sting out of those back of the neck and ear hits too!

A compact and tactical scope for 20mm Rails, that offers a fixed 4x magnification as well as the option of a low-light backup ironsight for close range engagements, and an illuminated reticule.

A pair of gloves available in a range of sizes and colours, designed to be protective, flexible and comfortable, making them perfect for Airsoft skirmishers who want gloves which are both tactical and comfy to wear.

A pair of gloves available in a range of sizes and colours, designed to be protective, flexible and comfortable, making them perfect for Airsoft skirmishers who want gloves which are both tactical and comfy to wear.

If you are sick and tired of having a marshal wrap tape around your arm a little too tight at each skirmish, why not take matters into your own hands and get yourself a team identifier armband! This armband is the Patrol Base edition, commissioned by us and to our specifications. Each armband is constructed from flexible elastic, is secured with broad velcro sections on the inside, and is designed to be extra wide to ensure the armband is visible to avoid IFF issues and make it more comfortable for long-duration wear. Being constructed from elastic also allows the armband to remain comfortable no matter your shooting position, and conform to any body type or loadout. The armband also sports "PATROL BASE" on the outside in our signature font, with the Allied Star alongside.

If you are sick and tired of having a marshal wrap tape around your arm a little too tight at each skirmish, why not take matters into your own hands and get yourself a team identifier armband! This armband is the Patrol Base edition, commissioned by us and to our specifications. Each armband is constructed from flexible elastic, is secured with broad velcro sections on the inside, and is designed to be extra wide to ensure the armband is visible to avoid IFF issues and make it more comfortable for long-duration wear. Being constructed from elastic also allows the armband to remain comfortable no matter your shooting position, and conform to any body type or loadout. The armband also sports "PATROL BASE" on the outside in our signature font, with the Allied Star alongside.

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

If you want some super slick magazine pouches with a uniquely modern look, Novritsch is the way to go! This mag pouch is designed for M4/AR-15 magazines and can also be adjusted via bungee cord, meaning it will fit almost any AR mag, whether it is long or short, polymer or metal.

The pouch consists of a fabric outer coating in a camouflage pattern of your choice with a polymer inner retainer which helps keep the mag pouch open for easy reloads and even easier reinsertion. The pouch attaches to MOLLE webbing loops and also has laser cut MOLLE loops on the front so you can stack them if you need extra carrying capacity. Whether you run a MOLLE vest or you are rocking the awesome Novritsch ASPC plate carrier, these pouches give you the capacity and the aesthetics!

A MOLLE compatible, double stacked triple magazine pouch designed to hold up to six Airsoft replica 5.56mm STANAG style magazines, or modern polymer PMAG style magazines. 

A MOLLE compatible, double stacked triple magazine pouch designed to hold up to six Airsoft replica 5.56mm STANAG style magazines, or modern polymer PMAG style magazines. 

A MOLLE compatible, double stacked triple magazine pouch designed to hold up to six Airsoft replica 5.56mm STANAG style magazines, or modern polymer PMAG style magazines. 

A belt-mountable drop leg pouch for SMGs which features a large adjustable holster and 2 x long magazine pouches.

A belt-mountable drop leg pouch for SMGs which features a large adjustable holster and 2 x long magazine pouches.

A belt-mountable drop leg pouch for SMGs which features a large adjustable holster and 2 x long magazine pouches.

A belt-mountable drop leg pouch for SMGs which features a large adjustable holster and 2 x long magazine pouches.

A simple Rifle Bag designed to carry a single Rifle with a length of up to 100cm / 1m, and an additional Small Rifle or Submachine Gun in the front 70cm Pocket. 

A simple Rifle Bag designed to carry a single Rifle with a length of up to 100cm / 1m, and an additional Small Rifle or Submachine Gun in the front 70cm Pocket. 

A simple Rifle Bag designed to carry a single Rifle with a length of up to 100cm / 1m, and an additional Small Rifle or Submachine Gun in the front 70cm Pocket. 

If you have a buckle up compatible chest rig, plate carrier or tactical vest and an SMG, one of these can make your life much easier! The 8Fields Tactical Buckle Up Quad SMG mag pouch can fit MP5/SMG-5, UMP, MP7 or UTR45 magazines inside and allows you to quickly swap this front panel with other buckle up panels so you can switch primaries mid game without having to mess with MOLLE or bring two rigs.

If you have a buckle up compatible chest rig, plate carrier or tactical vest and an SMG, one of these can make your life much easier! The 8Fields Tactical Buckle Up Quad SMG mag pouch can fit MP5/SMG-5, UMP, MP7 or UTR45 magazines inside and allows you to quickly swap this front panel with other buckle up panels so you can switch primaries mid game without having to mess with MOLLE or bring two rigs.

If you have a buckle up compatible chest rig, plate carrier or tactical vest and an SMG, one of these can make your life much easier! The 8Fields Tactical Buckle Up Quad SMG mag pouch can fit MP5/SMG-5, UMP, MP7 or UTR45 magazines inside and allows you to quickly swap this front panel with other buckle up panels so you can switch primaries mid game without having to mess with MOLLE or bring two rigs.