Airsoft Guns: Starter - Expert

If you are looking for a Gas Blowback Pistol but you're not sure where to start, this bundle was made with you in mind! The EU17 Complete Beginner Bundle includes the WE Europe EU17 GBB Pistol finished in Pre Two-Tone Blue, ASG 0.25g BBs, a Speed Loader and a can of NUPROL 2.0 Green Gas; everything you need to get started on your Airsoft adventure (other than your choice of eye protection!).

Being finished in Pre Two-Tone means you do not need UKARA or a VCRA defence to buy this set, and also that you can skip the wait times for usual Two-Toned items. Whether you are looking for a last-minute Airsoft gift or you want to get started with an Airsoft sidearm and everything you need to get shooting, this bundle will serve you well!

A CO2 Powered Gas Blowback Airsoft Pistol, based on the real world next generation Colt 1911 'Rail Gun' .45 Pistols, with the Airsoft Version having a Strong and Crisp Blowback.

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

Looking for a slick full metal M4/AR15 platform with some tasty pre-upgraded internals? The SA-E07 is exactly that! This modern KeyMod handguard equipped M4/AR15 has been around the block before, but the newest version now boasts Specna Arms' unique "Light Ops" stock which is their own take on a low profile stock with some choice refinements and a fresh look unlike anything else.

The SA-E07 holds the line with its rock solid EDGE™ series internals, including the reinforced ORION™ gearbox, 6.03mm tightbore inner barrel and Gate X-ASR MOSFET already wired in. Whether you are an experienced skirmisher looking to expand the armoury or a new player who wants to jump straight in with a full metal primary, the SA-E07 with the Light Ops stock is a fantastic choice whether you are a CQB player or you prefer a bit of woodland warfare!

The Specna Arms SA-249 PARA CORE is a lightweight yet incredibly tough LMG powered by Electric. Lightweight is in quotation marks as it has a Polymer Receiver, Handguard and Pistol Grip so that it is comfortable to use for long periods of time, but still comes in at just shy of 5kg. Coming packed with a Quick Change Spring System, Micro-switch Trigger Unit, Steel Gear Set and Electric Auto-Winding Box Magazine, what's not to love?

Looking for a short barrelled full metal M4/AR15 platform with some tasty pre-upgraded internals? The SA-E08 is what you need! This modern KeyMod handguard equipped M4/AR15 has been around the block before, but the newest version now boasts Specna Arms' unique "Light Ops" stock which is their own take on a low profile stock with some choice refinements and a fresh look unlike anything else.

The SA-E08 is equipped with the renowned EDGE™ series internals, including the reinforced ORION™ gearbox, 6.03mm tightbore inner barrel and Gate X-ASR MOSFET already wired in. Whether you are an experienced skirmisher looking to expand the armoury or a new player who wants to jump straight in with a full metal primary, the SA-E08 with the Light Ops stock is a fantastic choice for close quarters and skirmishers who like to close ground and make the enemy sweat!

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

If you're looking for a full metal AR with the stealthy aesthetic, the Specna Arms SA-E11-L EDGE™ M4/AR-15 SD AEG should suit you perfectly. This platform is the latest version of the SA-E11, boasting what is known as the "Light Ops Stock", Specna Arms' unique low-profile stock design added to the already impressive EDGE™ formula.

Inside the SA-E11-L you will find the usual pre-upgraded EDGE™ internals, with a 6.03mm tightbore inner barrel, ORION reinforced V2 gearbox, detailed Rock River Arms trademarks and a Gate X-ASR smart fuse MOSFET, giving you a rock solid feature set with room for more upgrades down the line thanks to its compatibility with Tokyo Marui spec AEG upgrades. If you like the sneaky styling of integrally suppressed AR platforms, the SA-E11-L is a solid choice!

Specna Arms have been the name in affordable pre-upgraded M4/AR15 AEGs for some time now, and the SA-E06 is a proven platform. The new version keeps all the good bits and adds even more, featuring the new Specna Arms Heavy Ops stock, part of their innovative SAAS accessory line.

The SA-E06H is fitted with a reinforced ORION™ gearbox, 6.03mm tightbore inner barrel and Gate X-ASR MOSFET already wired in, protecting the battery with its smart fuse functionality. Whether you are an experienced skirmisher looking to expand the armoury or a new player who wants to jump straight in with a full metal primary, the SA-E06-H would make a fantastic companion on the battlefield!

The Specna Arms SA-E10 PDW EDGE™ is an AR Platform Airsoft Electric Gun featuring the ORION Gearbox, crammed full of goodies that make this an excellent choice straight out of the box. This version of the rifle comes with a PDW Style Stock that helps keep overall length down, and makes it ideal for all locations and arenas.

The Specna Arms SA-E10 PDW EDGE™ is an AR Platform Airsoft Electric Gun featuring the ORION Gearbox, crammed full of goodies that make this an excellent choice straight out of the box. This version of the rifle comes with a PDW Style Stock that helps keep overall length down, and makes it ideal for all locations and arenas.

This Airsoft Electric Gun is a replica of the M249 MK2 with a comfortable Fixed Stock that it is more commonly seen with. It is designed to be lightweight, but is still incredibly rugged, coming in at 4.77KG. As you would expect from Specna Arms, it is packed with Quality of Life features such as a Quick Change Spring System, Microswitch Trigger Unit and an Auto-Winding 2500rnd Box Magazine.

Now Specna Arms has joined the AR-9 gang! Introducing the SA-X02 EDGE 2.0™ AR-9, Specna Arms' attempt to dethrone the legendary ARP9. The SA-X02 boasts full metal construction, ambidextrous controls and the superb Specna Arms ORION™ gearbox made all the better with a high torque motor and the game-changing Gate ASTER MOSFET.

On the outside, the SA-X02 boasts a totally unique look, with an officially licenced Strike Industries M-LOK handguard, a modern "billet" style receiver with weight-reducing cuts and an ergonomic pistol grip with a reduced grip angle which pairs perfectly with its compact PDW stock. If you are looking for an AR-9 which doesn't look like everyone else's and brings some seriously impressive performance to the table, the SA-X02 would be a great addition to your arsenal!

Now Specna Arms has joined the AR-9 gang! Introducing the SA-X02 EDGE 2.0™ AR-9, Specna Arms' attempt to dethrone the legendary ARP9. The SA-X02 boasts full metal construction, ambidextrous controls and the superb Specna Arms ORION™ gearbox made all the better with a high torque motor and the game-changing Gate ASTER MOSFET.

On the outside, the SA-X02 boasts a totally unique look, with an officially licenced Strike Industries M-LOK handguard, a modern "billet" style receiver with weight-reducing cuts and an ergonomic pistol grip with a reduced grip angle which pairs perfectly with its compact PDW stock. If you are looking for an AR-9 which doesn't look like everyone else's and brings some seriously impressive performance to the table, the SA-X02 would be a great addition to your arsenal!

Introducing the Specna Arms SA-X01, Specna's first AR-9 AEG platform. The SA-X01 boasts full metal construction with a unique modern receiver based on real steel "billet" receiver designs, fully ambidextrous controls and the legendary Gate ASTER™ MOSFET pre-installed.

The heart of the platform is the renowned ORION™ V2 gearbox and a high torque motor, giving the platform the snappy trigger response and rate of fire expected of a platform designed for CQB and aggressive run and gun playstyles, and we are also treated to a 6.03mm tightbore inner barrel and rotary HOP-up unit, providing plenty of range to compete outdoors. The SA-X01 is ready to go toe to toe with the well-respected ARP9, and for those who want an AR-9 but require the realistic feel of full metal construction, the SA-X01 is perfect!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus Purple HOP-up rubber and Nub was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. 

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus Purple HOP-up rubber and Nub was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. 

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you're a sneaky skirmisher seeking an affordable starter pack, the CYMA CM.513 M4 SD AEG Beginner Bundle was made with you in mind! This bundle includes the stealthily styled CM.513 Suppressed M4 SD, 2 extra NUPROL adjustable Mid-cap magazines, a Delta Armory speed loader, a 9.6V 1600mAh Ni-MH Battery and Charger, HASTA safe charging bag and a bag of Delta Armory 0.25g BBs with an 8Fields Tactical Simple Rifle Case for storage and transportation.

All you have left to buy to get started is your choice of face and eye protection. If you're looking for an easy and affordable way to get into Airsoft, this bundle is it!

The Double Eagle M56AL is the long version of the well liked M3 super 90 shotgun, a classic pump action shotgun design which feeds from 30rnd mock shotgun shells in the breech, and fires 3 BBs per trigger pull to appropriately simulate the spread of a real shotgun buckshot shell. The M56AL is constructed almost entirely from polymer with an alloy outer barrel and mock magazine tube, which makes this shotgun light and manoeuvrable despite its large and in charge status. Whether you fancy a challenge in CQB, or you are a fan of the movie Heat (1995), this shotgun would be an asset to your loadout.

A Zinc and Aluminium constructed M4 platform AEG with a rock-solid external construction, and an included barrel-mounted underslung M203 grenade launcher for maximum support effectiveness.

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

Built to a stunning standard, this faithful replica ticks all the boxes. The SA-H11 features a 416 style receiver, hand guard, grip and stock and a lovely QUAD RIS style handguard which all come together to make one beautiful and highly ergonomic Airsoft replica.

Built to a stunning standard, this faithful replica ticks all the boxes. The SA-H11 features a 416 style receiver, hand guard, grip and stock and a lovely QUAD RIS style handguard which all come together to make one beautiful and highly ergonomic Airsoft replica.

An electric powered replica of the classic M4A1 platform, complete with a shorter barrel than standard. The Specna Arms EDGE series of replicas has loads of features that set them apart from any other out-of-the-box AEG.

Designed with quality and functionality in mind to produce rifles to a quality never seen before. The Trident SPR is a Long barreled AEG rifle, ideally suited to long-range shooting and outdoors skirmishes, and is constructed from Alloy with a polymer pistol grip and stock, just like a real AR15 rifle!

Designed with quality and functionality in mind to produce rifles to a quality never seen before. The Trident SPR is a Long barreled AEG rifle, ideally suited to long-range shooting and outdoors skirmishes, and is constructed from Alloy with a polymer pistol grip and stock, just like a real AR15 rifle!

An Aluminium, Zinc and Steel constructed replica which features the GATE X-ASR MOSFET for rapid trigger response and longer life. Featuring up-rated internals and a quick change spring on the gearbox, the SA-E13 Edge is not one to miss.