Lancer Tactical LT-02 Gen.2 M4 CQBR Combo AEG

The replica is constructed mainly from nylon re-enforced polymer, with alloy parts in all the right places for strength. The rifle features a polymer receiver, stock, pistol grip, handguard, and rails, with alloy outer Barrel, flash hider, delta ring and internal parts. The rifle has a high-quality finish, and looks highly realistic at all distances and is light enough to be manoeuvrable in tight and cramped conditions.

Externally the replica features a large amount of rail real estate, with plenty of 20mm RIS / RAS rails for attaching a huge range of aftermarket parts and accessories. The top of the receiver is railed to allow for sights and scopes to be attached. The handguard is also railed, with a four-point rail setup allowing you to quikcly attach and remove the included rail covers and vertical foregrip. If customisation is your thing then 20m RIS / RAS is the most common type of connector for Airsoft and real-world parts! Fancy a new foregrip, a torch, lasers, or even launchers? You'll easily find a 20mm attachment to fix, allowing you to go wild with the way your replica looks and functions. If you're feeling fancy you could also replace the hand-guard in the future to give the gun a new or refreshed look.

To the rear of the replica is an adjustable 6 position stock that doubles up as the battery compartment, and allows up to a 9.6v Ni-Mh crane stock battery to be fit, meaning a lot of aftermarket upgrade LiPo will also fit thanks to the generous amount of space. To the rear, the butt plate is also rubberised to prevent slippage, and there are also slots for QD Sling Loop mounts to allow you to attach Slings to carry the replica easily.

Looking to go tactical? The flash hider of the replica can be removed to reveal a 14mm CCW thread, the most common type of barrel in Airsoft, meaning a huge range of Silencers, Suppressors and Tracer units can be affixed to the replica. If you want to give your replica a more tactical look you can attach a suppressor, or if you want to see your BBs as they travel through the air at night you can attach a tracer unit and use tracer BB's to put on a light show.

The replica features an adjustable hop-up unit for range and accuracy. The hop-up works by having a small patch of rubber the BB comes into contact with before it travels down the barrel, this causes the BB to spin and displace the air around it to add range and accuracy to shots. The hop-up is fully adjustable to allow you to use a wide range of BB weights and types and is adjusted via a radial adjuster making it easy to make tiny adjustments for a perfect tune.

Internally the replica features a rear wired V2 gearbox, meaning that the batteries are stored in the rear of the replica, and the gun is powered by a motor allowing the replica to fire in semi and fully automatic firing modes no matter the weather. If tinkering is your thing then there is an absolutely huge selection of aftermarket parts and upgrades thanks to the replica's inclusion of a V2 gearbox, the most common type of gearbox on the market. If power is an issue, then the replica features a quick change spring system allowing you to quickly swap out the spring for a more powerful or weaker spring without having to completely disassemble the gearbox. The replica also features low-resistance wiring to ensure maximum performance and lifespan of the batteries used. The upgrades don't stop there, the replica also features a 6.03mm tight-bore barrel for increased range and accuracy when using heavier weight BBs.

This rifle is perfect for any Airsoft Skirmisher new or old, making an extremely potent beginner Airsoft gun, or a great backup replica for a seasoned veteran. The replica has plenty of room for internal upgrades, with plenty of external compatibility for visual and tactical upgrades making it a perfect starter replica.

Features

• CQB Style combat M4A1 Airsoft Replica
• Gen II Upgraded nylon reinforced receivers
• Lightweight, yet robust, polymer receiver
• Safe, Semi and Fully Automatic firing modes
• Adjustable hop-up unit for range and accuracy
• Radial style hop-up unit for precise adjustments
• Removable spring-loaded and locking rear flip-up iron sight
• Included vertical foregrip for attaching to 20mm RIS / RAS Rails
• Adjustable front and rear iron sight
• 300rnd High Capacity Wheel Wound magazine
• 20mm RIS / RAS Rails for attaching Airsoft sights and scopes
• 6.5'' Four Point 20mm RIS / RAS railed handguard
• Removable 14mm CCW flash hider
• 14mm CCW threaded outer barrel for attaching Silencers and Suppressors
• Finger ridged and texture pistol grip for extra hold
• Adjustable six-position crane stock
• Rubberised butt plate to prevent slippage
• Rear QD Sling loop mount points in the sling
• Front sling loop for two-point sling setups
• Rear wired gearbox, with battery stored in the stock
• V2 Gearbox, with plenty of options for upgrades and repairs
• 6.03 tight bore barrel for range and accuracy
• 8mm Ball Bushing gearbox
• Low resistance wiring for performance
• Mock charging handle
• Mock forward assist
• Front bayonet lug for attaching rubber combat knives
• Removable side rail panels, designed to cover the rail for comfort when holding the rifle
• Branded:
  • 'Lancer Tactical'
  • '6mm Caliber'

Package Includes

• Lancer Tactical LT-02 Gen.2 M4 CQBR Combo AEG
• Magazine
• Instruction Manual