Delta Armory Airsoft

If you're a CQB specialist or a fast-moving outdoors skirmisher seeking an M4 platform with a sneaky aesthetic, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG is one to watch. Being an AEG of Delta's ALPHA™ line, this beast boasts a CNC aluminium quad-rail handguard, aluminium suppressor and the unique Delta Armory billet-style receiver, giving it a cutting-edge, brutal look with plenty of accessory options built in. 

Inside, you will find the usual complement of Delta Armory pre-upgraded internals, including a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The 18:1 ratio steel gearset runs on 7mm ball bearing bushings, reducing gearbox noise and friction. 

Focussing on long-term reliability, the DA-A04's internals are well suited to new skirmishers or experienced Airsofters looking for a reliable backup or starting point for a custom build. If this sounds like you, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG will serve you well!

If a full metal AR PDW will be your next buy, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG definately deserves your attention! Rocking full metal ALPHA™ standard externals on the outside and some seriously slick technology internally, the TALOS 1 is a mean CQB machine ideal for cutting tight corners up close and personal. 

Inside, the TALOS 1 is equipped with Delta's EAGLE™ programmable MOSFET/ETU, offering a boost in trigger response and rate of fire along with programmable fire controls. Available fire modes include 3 or 5-round burst mode, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you almost too many options all of which can be programmed using the fire controls of the AEG itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the TALOS 1 far more long-range effect on target than one might expect!

Whether you specialise in CQB or prefer a short platform for aggressive outdoor play, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG will be an asset to your battlefield role. Dressed to impress on the outside with all the latest attachment interfaces, the TALOS 1 is a force to contend with; kit it out and get busy!

If you're after an MK18 and a full complement of accessories, this is what you need! The Delta Armory MK18 BRAVO™ Binary Bundle pairs the Delta Armory DA-B15-ETU MK18 with 2 extra magazines, a red dot sight (lens protector recommended), BBs, a speed loader, LiPo battery, charger, and a battery charging bag, giving you everything you need to get going with a slick Military style setup!

This bundle is named for the Binary Trigger function of the pre-installed ETU system inside the MK18, though it can also provide burst mode and pre-cocking for a faster trigger response. If you do a mix of indoor and outdoor skirmishing, this setup will see you well-equipped!

If you've lost important parts from your mag release, this set should sort you out! The Delta Armory Magazine Release Catch for M4/AR-15 AEG is a replacement original parts set which includes the mag catch, spring and screw, though the button itself is not included. Compatibility-wise, this set is intended for Delta Amory M4/AR-15 AEG platforms but should also fit most other brands. If your mag release spring went flying or your screw got lost in the carpet, this set should get you back up and running!

If you want to turn your version 2 gearbox-equipped AEG into a true space gun, the Delta Armory EAGLE™ Programmable MOSFET Control Unit is one of the most affordable ways to do it. The EAGLE™ is compatible with any Airsoft AEG which uses a version 2 gearbox and improves trigger response and rate of fire through its gains in electrical efficiency, amongst its many other benefits!

The EAGLE™ offers more programmable options than many of its rivals in the cheap MOSFET game. These include 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only, 5 levels of trigger sensitivity adjustment and adjustable pre-cocking, with 6 levels to choose from. Active braking can also be turned on or off and all programmable options can be set using the trigger and fire selector of your AEG, avoiding the additional expense of needing an app or PC connectivity to take advantage of the wealth of programmable options available. 

Naturally, the EAGLE™ will require a certain amount of skill and expertise to install so if this is your first time, we recommend consulting an experienced technician. Compatibility-wise, the EAGLE™ is designed for M4/AR-15 version 2 gearboxes specifically and should be compatible with most V2 gearbox shells on the market, though we have not yet confirmed whether it will work with G3 and SMG-5 platforms. If you're looking for an affordable way to add fancy features to your M4/AR-15 AEG, the EAGLE™ Programmable MOSFET Control Unit from Delta Armory is exactly that!

If you're searching for a compact platform for your aggressive playstyle, the Delta Armory DA-B13 BRAVO™ M4/AR-15 8" M-LOK AEG is one to watch. Externally, this beast is rocking an M-LOK/20mm Picatinny hybrid handguard and the superb Delta Armory battery stock, getting you off the mark with advanced externals ready for your choice of accessories! 

Inside the DA-B13, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. The quick change spring system allows for easy power tuning to meet your local site's limits and the tightbore inner barrel will improve accuracy potential and air efficiency, giving you a few extra FPS from the same power spring. 

If you're new to the game looking for a reliable starting point for your Airsoft adventure with full aftermarket upgrade compatibility and competitive performance straight out of the box, the Delta Armory DA-B13 BRAVO™ M4/AR-15 8" M-LOK AEG suits your needs perfectly!

If you need a compact AR platform as a compliment to a longer platform, the DA-B10 BRAVO™ 8" KeyMod M4/AR-15 AEG from Delta Armory is a great shout. On the outside, this M4 AEG is equipped with a CNC Aluminium KeyMod handguard with 20mm Picatinny rail sections pre-installed, ready for either KeyMod or 20mm accessories at your preference. 

Inside the DA-B10, we are treated to some thoughtful internal upgrades to extend the platform's lifespan and enhance performance. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, the steel 18:1 gearset runs on 7mm ball-bearing bushings and SHS provides the piston and tappet plate, a brand known for dependable, hard-wearing upgrade parts. If you're looking for an affordable first AEG or a reliable backup for an unbeatable price, the Delta Armory DA-B10 BRAVO™ 8" KeyMod M4/AR-15 AEG is one to watch!

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode. 

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

If you need a compact AR for CQB or a sniper's backup, the DA-B16-EGL BRAVO™ TALOS 1 PDW M4/AR-15 AEG is ideal. This beastly little AR is lightweight and extremely compact, making it ideal for fast movers and those who need a backup platform with more firepower than a pistol. Inside, the TALOS 1 has some exciting features as a bonus, giving you far more bang for your buck than its rivals!

The Delta Armory EAGLE™ programmable MOSFET is the cherry on top of a superb external build, offering the option of burst mode, binary trigger, semi-auto only, sniper delay, progressive trigger (AUG mode), precocking and trigger sensitivity adjustment. A seriously advanced bit of kit, the EAGLE™ allows you to program all of these modes using the trigger and fire selector only, with no need for apps, programming cards or other hidden costs! Also inside is a 6.03mm tightbore inner barrel, rotary HOP-up unit and the usual Delta Armory compliment of SHS reinforced internals. 

Delta's gift to those struggling with longer platforms in CQB, the TALOS 1 gives you ultra-modern externals, well-equipped internals and the perfect balance between low weight and the satisfying realism of metal parts. If you need a primary that won't slow you down with plenty of programmable fire mode options by default, the DA-B16-EGL BRAVO™ TALOS 1 PDW M4/AR-15 AEG is the one!

If you're looking for 0.28g BIO BBs for woodland warfare, Delta Armory 0.28g Diamond 6mm BIO BBs are a fine choice. These BBs are supplied in a 1KG resealable bag of approximately 3571 BBs and are high-grade polished BBs to ensure reliable feeding and maximum accuracy potential. 

Being made from biodegradable materials means these BBs are suitable for outdoor skirmishing at any site in the country and great for target shooting in the back garden. 0.28G BBs offer a few benefits compared to lighter weights, including extending range with the correct HOP-up setting, improving wind resistance and increasing foliage penetration potential. If you've got an outdoor skirmish booked, Delta Armory 0.28g Diamond 6mm BIO BBs are the right ammo for the job!

Whether you're new to the game and looking to start out with a full metal platform bristling with advanced features or a veteran skirmisher in search of an M4 AEG you can just pick up and go with, the Delta Armory DA-A06 ALPHA™ KeyMod 10" M4/AR-15 AEG is a fine choice. A realistically hefty full metal build with a cutting-edge aesthetic at just the right length to do its dirty work both outdoors and in CQB, the DA-A06 ALPHA™ is ready for any challenge that faces it. 

Equipped with a KeyMod handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out with SHS reinforced parts and a 6.03mm tightbore inner barrel the DA-A06 ALPHA™ is an extremely competitive platform, both on price and performance!

If you're after a new M4 AEG but don't like to commit to a particular build direction, the DA-A06 won't make any decisions for you! Thanks to the modularity of the AR platform and the DA-A06 ALPHA™ 10" KeyMod M4/AR-15 AEG is ready to accept a full complement of accessories, kitted out just how you desire and give the enemy team the what for when it comes to skirmish day!

If you're looking for a military-style SBR M4 with some slick accessories at a decent discount, this bundle was made with you in mind! The Delta Armory M4A1 Combat Ready Bundle includes the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG, a Vector Optics Maverick red dot sight, a Big Dragon SF Style Suppressor and short vertical foregrip and a pair of PTS EPM Gen.2 mid-caps to keep it well fed. 

This M4A1 CQBR is ready to rock, all you'll need to get stuck in is BBs, a speed loader and a battery. We recommend the NUPROL 7.4V 1450mAh LiPo Battery in nun-chuck configuration for an easy fit and great performance!

If you have mid-caps to load, you'll need one of these! The Delta Armory 100rnd Magazine Speed Loader is a thumb plunger type speed loader constructed from translucent polymer which holds 100 BBs approximately. The loader is filled via its fill window at the top and the thumb plunger can be deployed and stowed via the button on the side. 

To load an Airsoft mid-cap or low-cap, simply fill your speed loader, align the fill/feed port of the magazine with the aperture on the bottom of the loader, hold the mag and loader together and push the thumb plunger repeatedly until it becomes firm. Your mag is now filled. If you run mid-caps, low-caps or you like to use multiple weights of BB, speed loaders are essential Airsoft kit!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind. 

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type. 

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful! 

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind. 

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type. 

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful! 

If you want to look like a real baller at your next skirmish but your budget is limited, fear not! The Delta Armory Jump Plate Carrier MOLLE Tactical Vest is a super affordable JPC replica, allowing you to get the look of the SAS, Navy SEALs or Delta Force for less than the price of a takeaway. Constructed from Nylon with bungee cord mag pouch retainers and cummerbund adjustment, the Jump Plate Carrier is a low-profile plate carrier designed with parachute jumping in mind. 

While it may be low-profile, the JPC has plenty of MOLLE attachment loops and all sides, allowing you to kit it out with MOLLE pouches if you need more load-bearing capacity or run it slick with the 3 built-in M4/AR-15 magazine pouches and move fast with the added protection of the pre-installed foam mock SAPI plates. The vest is fully adjustable, with velcro adjustments on each shoulder to customise the ride height and bungee cord at the rear to allow for practically any body type. 

Available in a wide range of colour options suitable for any style, this JPC is what you need if you like your Airsoft kit cheap and cheerful! 

If you're looking for a lightweight, affordable AEG platform, whether this is your first AEG or another for the arsenal, the DA-C07 CHARLIE™ from Delta Armory is one of the best options out there. Constructed from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed, this is the stealthy styled option from the Delta Armory CHARLIE™ line, known as the "KeyMod Predator".

The DA-C07 comes kitted out with an aluminium micro suppressor, a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and the unique Delta Armory battery stock with a generously sized battery compartment and built-in QD sling sockets.

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C07 boasts a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you were holding back on buying an affordable AEG because you're worried it can't compete, the DA-C07 will surprise you!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed. 

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs. 

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

Beginners and veterans alike, if you need a lightweight performance-oriented M4/AR-15 platform either to add to the arsenal or as your first AEG, Delta Armory is one to watch! New to the scene with loads of potential, the DA-C04 CHARLIE™ M4/AR-15 KeyMod AEG is constructed almost entirely from strong high density polymer for a lightweight and agile build with an alloy outer barrel to add strength where needed. 

The DA-C04 comes equipped with a KeyMod-style handguard with removable proprietary 20mm rail sections, a 20mm railed receiver ready for a red dot sight or scope, an ergonomic pistol grip styled after one of the most modern real steel AR grips and a threaded outer barrel for your tracer/suppressor needs. 

Inside, it gets even better! The reinforced version 2 gearbox boasts a quick change spring guide, an SHS piston and tappet plate, 7mm bushings and a steel 18:1 gearset. To add some accuracy and range into the mix, the DA-C04 is kitted out with a 6.03mm tightbore inner barrel and rotary HOP-up unit, giving you some of the best internal options pre-installed. If you want a lightweight primary you will never need to touch internally, this is it!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The Delta Armory 130rnd STANAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after the STANAG magazine, a standard issue magazine for M4, L85/SA80, SCAR-L, HK416 rifles used in NATO militaries, amongst many others. 

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you're looking for affordable BBs for a mix of outdoors and CQB, the Delta Armory 0.25g 6mm BBs are a good shout. Supplied in a 1KG bulk bag containing approximately 4000 BBs, Delta's 0.25g BBs are a great compromise between affordability and effectiveness, ideal for use in rifles, pistols, shotguns or SMGs shooting at standard skirmish site energy levels (<1.14 joule). 

These BBs weigh 0.25g, making them ideal for both CQB and outdoor situations engaging targets at close range with any type of Airsoft gun. Despite being some of the cheapest BBs available, Delta Armory 0.25g BBs have very tight tolerances, measuring 5.95mm +/- 0.01mm which is great for accuracy and consistency. If you're looking for a cost-effective BB which doesn't compromise on quality, Delta Armory 0.25g 6mm BBs; 1KG Bag will do the trick!

If you're in search of an affordable red dot sight with the iconic open reflex look and more than its fair share of functions, the Delta Armory Multi-Reticle Open Reflex Red Dot Sight is one to watch. Constructed from aluminium with an integral 20mm Picatinny rail mount, this red dot sight is powered by a CR2032 button cell with the choice of red or green reticle illumination in 5 brightness levels.  

Your choice of reticle can be selected via the dial on the rear of the sight, offering a simple dot, ringed dot, cross or ringed cross reticle, perfect for any environment or preference. With an integral mount, all the reticle options one could ever need along with full adjustment when it comes to zero, reticle colour and brightness, the Delta Armory Multi-Reticle Open Reflex Red Dot Sight is an impressive bit of kit for an equally impressive price!

If you're seeking a light and fast M4 platform to handle engagements at all ranges, the DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG should be right up your street. This M4/AR-15 AEG boasts an elite look on the outside, rocking a pre-installed aluminium micro suppressor, mock KeyMod handguard complete with modular rail sections and the latest and greatest stock/grip combo featured on the Delta Armory R15 FREYA™ series.

While the internals of the DA-C07-EGL are similarly equipped to the original CHARLIE™ series, the addition of the new EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price!

If you like the idea of a lightweight polymer build with the ability to run burst mode, customise trigger sensitivity and much more, the Delta Armory DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG belongs in your arsenal!

If you're seeking a light and fast M4 platform to handle engagements at all ranges, the DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG should be right up your street. This M4/AR-15 AEG boasts an elite look on the outside, rocking a pre-installed aluminium micro suppressor, mock KeyMod handguard complete with modular rail sections and the latest and greatest stock/grip combo featured on the Delta Armory R15 FREYA™ series.

While the internals of the DA-C07-EGL are similarly equipped to the original CHARLIE™ series, the addition of the new EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price!

If you like the idea of a lightweight polymer build with the ability to run burst mode, customise trigger sensitivity and much more, the Delta Armory DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG belongs in your arsenal!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

The Strike handguard also comes with an angled foregrip pre-installed on the 6 o'clock M-LOK slots which can be removed and repositioned wherever you prefer. Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip will do the trick!

If you're looking for stylish external upgrades for your M4/AR-15, check out the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip! This CNC machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with 20mm Picatinny rail along the top, The centre of the upper rail includes a relief cut designed for "C-clamp" or thumb over bore grips but also makes a great spot to mount a pressure switch via velcro or zip ties. This handguard is available in 3 different lengths; 8-inch for CQB builds, 10-inch for mid-length and 13-inch for carbine-length platforms.

The Strike handguard also comes with an angled foregrip pre-installed on the 6 o'clock M-LOK slots which can be removed and repositioned wherever you prefer. Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads which is almost all of them. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the Delta Armory CNC Aluminium Strike M-LOK Handguard w/Angled Foregrip will do the trick!

If military-style M4s are your poison and you need a new platform for close quarters, the DA-C02 CHARLIE™ M4/AR-15 CQBR AEG is a sure choice. This AEG is styled after the CQBR (Close Quarters Battle Receiver) configuration of the M4A1 rifle, a drop-in upper receiver kit issued to Army Rangers, Delta Force and Navy Seals, fitted with a 10.5-inch outer barrel and KAC RAS Style quad railed handguard. 

To furnish the CQBR M4 configuration with some modern ergonomics, Delta has added a gunfighter mod.3 style pistol grip and the awesome Delta Armory battery stock and enhanced receiver, complete with gripping texture on the magazine well and a built-in enlarged trigger guard. As a replica of the Delta Armory CHARLIE™ line, the DA-C02 is constructed primarily from high density polymer with alloy trim parts to provide manageable weight so you can make energetic advances all day long. 

Internally, the DA-C02 is generously kitted out with a tightbore inner barrel, a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. If you need a solid, lightweight workhorse of an M4 platform with plenty of future upgrade and customisation options, the DA-C02 CQBR is exactly that. A platform this price has no business being so good straight out of the box! 

If you need more capacity but don't want to carry 10 mags, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs will keep you sweet! This wheel-wound high-capacity magazine holds 300 BBs and replicates the real steel NATO STANAG 30rnd mag with its stamped steel shell. Compatibility-wise, this mag should fit in the vast majority of M4/AR-15, SCAR-L and L85/SA80 AEGs. 

Like other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, pull open the hatch, then pour your BBs in. With this done, wind the winding wheel on the baseplate to tension the mag and you're ready to rock. If you need more capacity but don't want to compromise agility with a rig full of magazines, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs is what you need!

If you're looking for accuracy improvements for your M4/AR-15 AEG, the Delta Armory TRINITY R-Hop Bucking Bundle for AEG is what you need to tighten your groupings. This set includes an enhanced HOP-up arm, HOP-up bucking and OMEGA-style nub manufactured for Delta by upgrade legends Psionic Upgrades. The included HOP-up arm is designed for M4/AR-15 AEG rotary HOP-up units, specifically the Delta Armory/Specna Arms/Evolution/Lancer Tactical type but the bucking and nub are compatible with other Airsoft AEGs of all different shapes and sizes. 

The inner patch of the TRINITY bucking is diamond-shaped, similar to the Maple Leaf Super bucking, intended to improve accuracy by applying backspin more consistently. The advantage of using a TRINITY set rather than doing all the mods yourself is its simple drop-in installation, low price compared to sourcing a separate bucking, nub and HOP-up arm and guaranteed compatibility, meaning no chance your nub doesn't work with your chosen bucking. If you're looking for tighter groupings from your Airsoft AEG, the TRINITY R-HOP Bucking Bundle is the one to go for!