Airsoft Helmets & Helmet Accessories

If you are in the middle of a helmet build and it looks a little bare, consider the Accessory Pouch Gen.2 by FMA. This pouch is modelled after pouches used for NVG counter weights and battery packs, but can be put to whatever use you need on the skirmish field.

If you're looking for a stylish cover for your FAST Maritime replica, the FMA Multifunctional Cover is a great shout. This helmet cover includes a built-in counterweight pouch, ideally suited to a strobe light, power bank or other small accessories. As with other helmet covers, the Multifunctional Cover includes loops for foliage and cable routing, Velcro panels for Morale andI.D patches and a cutout for the NVG mount up front. 

This cover is designed specifically for the FAST Maritime helmet cut and won't fit other FAST helmets like the PJ, Bump or Ballistic. If you operate in many different environments and like to change your camo to suit, this helmet cover can help you stay concealed and look fantastic while doing it!

The MTEK Flux Helmet is a replica of a real-world product which serves to become the be-all and end-all of Helmet Systems, offering true modularity in a lightweight and highly developed Airsoft Helmet which has every base covered.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Ballistic Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Ballistic Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

A lightweight and comfortable helmet for Airsoft use, which is available in a variety of colours, features an NVG Mount, Side Rails and tactical Velcro space.

If you want to protect your lower face, but would rather look like a real life future soldier than an Airsoft Skirmisher, the Helmet Mandible Guard from FMA has your 6! Constructed from high density polymer, this Mandible guard set protects your lower face, and mounts to any FAST type helmet via its ARC accessory rails. The angular, modern design of the Mandible guard gives it a sleek look, especially when mounted to a well-setup FAST helmet. The Mandible guard also folds up, making it easy to stash in your kitbag at the end of the day's skirmishing!

The Low Profile NVG Mounting System is a complete replacement shroud for Airsoft Helmets, which also comes with a Mount Assembly attached, ready to connect to a wide range of Night Vision Systems. It is constructed from a fairly tough Polymer, however we recommend tethering the Shroud to your Helmet. This advice is even given to users of real Mounts/NVGs, so it's just common sense when operating with an Airsoft replica.

The Low Profile NVG Mounting System is a complete replacement shroud for Airsoft Helmets, which also comes with a Mount Assembly attached, ready to connect to a wide range of Night Vision Systems. It is constructed from a fairly tough Polymer, however we recommend tethering the Shroud to your Helmet. This advice is even given to users of real Mounts/NVGs, so it's just common sense when operating with an Airsoft replica.

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

A set of Adapters to attach your EARMOR Active Ear Protection Headsets to an M-TEK Flux Helmet Rail. If you own a pair of EARMOR Active Ear Defenders (such as the M32) and a M-TEK Flux Helmet, then this is the most efficient and comfortable way to combine the two. This method of mounting removes the needs for the large and cumbersome headband, making them far more pleasant to wear for a long skirmish.

If you love the looks of FAST helmets but need extra airflow to keep your head cool and maintain focus, the FAST PJ Replica from FMA should suit you perfectly. This helmet replicates the real steel Para Jump/Carbon FAST helmet, featuring ARC accessory rails on each side and an NVG mount up front, complete with a protective insert. 

One of the best features of this helmet is its OCC adjustment dial, located on the rear of the suspension. The OCC dial provides perfect stability when cranked down, meaning if you have an action camera or other kit mounted to your lid it won't slide around on your head during dynamic movements. Whether you are looking for a summer alternative to a ballistic helmet replica or you want to reduce the chances of your goggles fogging, the FAST PJ Helmet Replica is the way to go! 

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

A lightweight LED Light Set suitable for providing close range Illumination or light for Airsoft. Constructed out of robust polymer and metal, this LED set is more than capable of taking bumps and knock during combat. 

A lightweight LED Light Set suitable for providing close range Illumination or light for Airsoft. Constructed out of robust polymer and metal, this LED set is more than capable of taking bumps and knock during combat. 

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

A fabric helmet cover, designed to be used to cover MICH 2000 helmets and change their appearance as quickly and as easily as possible.

If you're running active hearing protection and a helmet, the Novritsch Premium Headset Helmet Mount; Black V1 is what you need to make your headgear more comfortable. These headset mounting arms are compatible with the Novritsch Headset V1 and Premium Headset V1 and mount to ARC accessory rails found on FAST helmets, Airframe helmets and many others. 

The advantage of a helmet-mounted headset is improved comfort, meaning one less band underneath your helmet which will constantly need adjustment to avoid tearing your hair out. Another edge you gain is the ability to stow your headset on the top of your helmet without removing it, allowing you to cool off in those hot summer skirmishes or hear properly in the event your headset cuts out in the heat of battle. 

If you like to keep pace with the latest innovations in the real steel world, this belongs on your head! The IHPS Combat Helmet is the US Army's latest issue brain bucket, rocking an innovative boltless suspension design, accessory rails and an NVG mount bracket up front. FMA's replica matches the look and can be kitted out like the real thing, but will only protect you from BBs, not incoming rounds, shrapnel or bricks! 

The set includes the helmet itself, a helmet cover in the same colour as the helmet shell, a set of user-configurable internal foam pads and external velcro panels so you can add patches to customise your lid. The helmet cover is a specific design for the IHPS and includes counterweight straps and the rear and velcro on the top, rear and sides. If you like to lead the pack when it comes to the latest replica kit, the IHPS helmet should suit you well!

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

If you're looking for a stylish tactical helmet but want to separate yourself from the FAST-wearing masses, the Next Generation Spec-Ops Ballistic Helmet Replica is the unique lid you've been looking for! This helmet is a great replica of one of the most modern, up-and-coming ballistic helmets, known in the real steel world as the "Caiman Ballistic Helmet". Naturally, this helmet does not provide any ballistic protection but it will make you look utterly slick in game! 

Furnished with an NVG mount up front and skeletonised ARC rails on each side, the Next-Gen Ballistic Helmet is more than a match for FAST, Airframe and MICH helmets, with a uniquely modern style to mark it out from the rest. Inside, we are treated to an OCC-style rotary adjustment dial which keeps the helmet stable on your head regardless of whether you mount an action camera to the front or navigation lights to the sides. If you want to set yourself apart from the crowd and run one of the latest and greatest real steel helmet designs in replica form, here you go!

A helmet mount, designed to allow the user to fit Sights, such as Night Vision or Thermal Scopes to their FAST helmets or equivalent mount point. 

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads.