S&T G316 AG36 40mm MOSCART Grenade Launcher for AR36

S&T
Code: STGLG316BK
£169.99
  • For AR36K/E Replicas
  • Fires 40mm MOSCART Grenades
  • Underbarrel Launcher w/handguard & ladder sights

If you need a gun on your gun so you can shoot while you shoot, the S&T G316 Grenade Launcher is ideal! This imposing piece of equipment is designed for AR36 platform Airsoft guns, and will install in place of your handguard to provide an awesome under barrel 40mm Grenade Launcher for you to effortlessly fire Airsoft MOSCART Grenades from underneath your Assault Rifle. 

The included handguard is designed to replace either the K or the E (full-length) AR36 handguards, so if you want to add it to your AR36C you will most likely need a barrel extension to clear the handguard. If you want a serious firepower upgrade for your AR36, then the S&T G316 Grenade Launcher is just what you were looking for!

Full description

Description

The S&T G316 Grenade Launcher is made to a realistic standard using Alloy for the barrel and polymer for the pistol grip and handguard assembly for maximum realism. Although a fair amount of Polymer has been used for construction, it still clocks in at 1.6kg, so you will definitely know that it is attached to your replica!

The G316 40mm launcher mounts in place of your existing handguard and is ideally used on either the K or E (full-length) AR36 variants. To mount the launcher, simply remove your old handguard assembly and slide this one in place, securing it as you would your traditional handguard. If you want to mount this launcher to the AR36C, you will need a 4.5-inch barrel extension to clear the pre-installed handguard. 

To open the launcher's barrel, we have a textured button inside the trigger guard that needs to be pressed, after which the barrel will spring out to the left side for loading. Slide your 40mm MOSCART grenade into the barrel from the chamber end and push it closed once again; the Grenade Launcher is now live. The Ambidextrous Safety/Fire Selector is positioned on the pistol grip that can be used to make the launcher safe, should you want to operate with a shell in the tube, ready to bring the pain!

An integrated grenade launcher-style ladder sight can be found on the side of the launcher. The sight can be deployed by pressing the rearmost section of the ladder and the foremost section of the front sight post. The sight provides 50m increments which obviously won't correlate to an Airsoft shell's range, but once you learn the range of your favourite MOSCART it should be easier to guess the elevation required from the launcher each time you send it!

If you own an AR36 platform Airsoft gun and you want to either add some awesome tactical aesthetic to the externals, or you want to massively increase the amount of BBs you can throw out the enemy team, then the S&T G316 Grenade Launcher is ideal for the task.

Features

  • Full metal construction
  • For AR36 Platform Airsoft Gun - Ideally "K" or "E" variants
  • Add a 4.5-inch barrel extension to mount on AR36C rifles
  • Fires Airsoft MOSCART Shells - Click the link to learn more!
  • Side-loading launcher tube - No limits on cartridge length
  • Integrated ladder sight - Allows you to arc shots over longer ranges
  • Ambidextrous barrel release - Easy access for left or right-handed users
  • Ambidextrous Fire Selector - Carry safely with one in the tube
  • Easy Installation - Pop out your handguard pin, remove the handguard, install and put the pin back in!
  • Requires a 40mm MOSCART Grenade to function
  • Total Weight: 1.6kg

Package Includes

  • S&T G316 AG36 40mm MOSCART Grenade Launcher for AR36

Special Instructions

Please note that this kit is made with the AR36K and AR36E (full-length) variants in mind due to the handguard length. To install this kit on an AR36C you will need a 4.5-inch outer barrel extension to clear the handguard. 

This launcher requires a 40mm MOSCART grenade to function. 

Specification

General

Weapon Construction External
Weapon Type
Launcher
Over 18 Only Icon
Over 18
Yes
Icon UKARA - United Kingdom Airsoft Retailer Association
Defence / UKARA Required
Yes, No,
Site Legal Icon
Site Legal, using 0.20g BB
Yes
Screwdriver Icon
Pre-Built
Yes
Skill Level Icon
User Skill Level
Experienced Player
Patrol Base - Warning Icon
Warnings
This launcher requires a 40mm MOSCART grenade to be used (not included)

Weight and Dimension

Weight KG Icon
Weight (KG)
Approx. 1.65kg
Weapon Length Collapsed
Length (Collapsed)
38.5cm
Weapon Length Extended
Length (Extended)
38.5cm

Construction

Colour Wheel Greyscale
Primary Colour
Black
Construction Icon
Construction
Aluminium outer barrel, trigger, barrel break latch, handguard mount. High density polymer grenade sights, handguard and pistol grip.
Weapon Construction External
External Construction
Polymer
Aluminium
Gearbox Icon
Internal Construction
Polymer
Alloy
Aluminium
Steel

Weapon Specific

Power Source Icon
Powered By
MOSCART / Airsoft Grenade Shell
Blowback Icon
Blowback
None
Weapon Platform
Launchers, Weapon Mounted Launchers, AG36,
Fire Select Icon
Fire Selector
PatrolBase | Fire Select Safe
Safe
Fire
Weapon Safety Features Icon
Safety Features
Trigger Lock
Shooter Configuration Icon
Shooter Configuration
Ambidextrous
Weapon Configuration Icon
Weapon Configuration
Break Action
Weapon Scale Icon
Weapon Scale
1:1
Suggested BB Weight
0.25g

Hop-Up

Hop-Up Unit Icon
Hop-Up Unit
No

Furniture

Weapon Furniture Icon
Furniture
  • Flip-Up Ironsights
  • Ambidextrous Fire Selector
  • Ergonomic Pistol Grip
  • Ported Barrel Shroud/Heat Shield
  • Sling Point(s)
Rail System Icon
Rail System
None
Sight Type Icon
Sight Type
Grenade launcher ladder sights
Sling Plate Icon
Sling Options
Handguard , Loop ,

Barrel

Outer Barrel Length (in)
12''

Product Testing Data

Notepad Icon
Test Description
MOSCART Dependant
Notepad Icon
Test Date
05/01/2024

Size guide

Joule Charts

Special Instructions

These table can be used as a reference to see if the BB weight you are using will be over acceptable Joulage limits at some Airsoft Sites in the UK. To check if the weight can be used chrono your weapon using the BB you intend to use, and then compare it to the chart.

FPS, Power and Joule Limits can vary from site to site, so please get in touch with where you're going to play with in advance to avoid disappointment.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, with a 350fps limit for Automatic Replicas, 400fps for Semi-Automatic Replicas, and 500fps for Bolt Action Replicas.

Tap the tabs below to open the relevant chart for your replica.

Suggested limits are based on Joulage Limit rules used Halo Mill: Proving Grounds, and is the equivalent of 350fps, using 0.20g BB resulting in an upper limit of 1.14j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
325 0.98 1.23 1.37 1.47 1.57 1.77 1.96 2.11 2.21 2.45
328 1.00 1.25 1.40 1.50 1.60 1.80 2.00 2.15 2.25 2.50
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
335 1.04 1.30 1.46 1.56 1.67 1.88 2.09 2.24 2.35 2.61
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
345 1.11 1.38 1.55 1.66 1.77 1.99 2.21 2.38 2.49 2.76
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
355 1.17 1.46 1.64 1.76 1.87 2.11 2.34 2.52 2.63 2.93
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 400fps, using 0.20g BB resulting in an upper limit of 1.49j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90

Suggested limits are based on Joulage Limit rules used at Halo Mill: Proving Grounds, and is the equivalent of 500fps, using 0.20g BB resulting in an upper limit of 2.32j.

Velocity BB Weight (Grams)
FPS 0.20 0.25 0.28 0.30 0.32 0.36 0.40 0.43 0.45 0.50
250 0.58 0.73 0.81 0.87 0.93 1.05 1.16 1.25 1.31 1.45
260 0.63 0.79 0.88 0.94 1.00 1.13 1.26 1.35 1.41 1.57
270 0.68 0.85 0.95 1.02 1.08 1.22 1.35 1.46 1.52 1.69
280 0.73 0.91 1.02 1.09 1.17 1.31 1.46 1.57 1.64 1.82
290 0.78 0.98 1.09 1.17 1.25 1.41 1.56 1.68 1.76 1.95
300 0.84 1.05 1.17 1.25 1.34 1.51 1.67 1.80 1.88 2.09
310 0.89 1.12 1.25 1.34 1.43 1.61 1.79 1.92 2.01 2.23
320 0.95 1.19 1.33 1.43 1.52 1.71 1.90 2.05 2.14 2.38
330 1.01 1.26 1.42 1.52 1.62 1.82 2.02 2.18 2.28 2.53
340 1.07 1.34 1.50 1.61 1.72 1.93 2.15 2.31 2.42 2.68
350 1.14 1.42 1.59 1.71 1.82 2.05 2.28 2.45 2.56 2.85
360 1.20 1.51 1.69 1.81 1.93 2.17 2.41 2.59 2.71 3.01
370 1.27 1.59 1.78 1.91 2.03 2.29 2.54 2.73 2.86 3.18
380 1.34 1.68 1.88 2.01 2.15 2.41 2.68 2.88 3.02 3.35
390 1.41 1.77 1.98 2.12 2.26 2.54 2.83 3.04 3.18 3.53
400 1.49 1.86 2.08 2.23 2.38 2.68 2.97 3.20 3.34 3.72
410 1.56 1.95 2.19 2.34 2.50 2.81 3.12 3.36 3.51 3.90
420 1.64 2.05 2.29 2.46 2.62 2.95 3.28 3.52 3.69 4.10
430 1.72 2.15 2.40 2.58 2.75 3.09 3.44 3.69 3.86 4.29
440 1.80 2.25 2.52 2.70 2.88 3.24 3.60 3.87 4.05 4.50
450 1.88 2.35 2.63 2.82 3.01 3.39 3.76 4.04 4.23 4.70
460 1.97 2.46 2.75 2.95 3.15 3.54 3.93 4.23 4.42 4.91
470 2.05 2.57 2.87 3.08 3.28 3.69 4.10 4.41 4.62 5.13
480 2.14 2.68 3.00 3.21 3.42 3.85 4.28 4.60 4.82 5.35
490 2.23 2.79 3.12 3.35 3.57 4.02 4.46 4.80 5.02 5.58
500 2.32 2.90 3.25 3.48 3.72 4.18 4.65 4.99 5.23 5.81
510 2.42 3.02 3.38 3.62 3.87 4.35 4.83 5.20 5.44 6.04