- Full metal construction
- Zion Arms Nebula ETU / MOSFET pre-installed
- CNC 7075 T6 Aluminium receiver & handguard
If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.
On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!
- Full metal construction
- Zion Arms Nebula ETU / MOSFET pre-installed
- CNC 7075 T6 Aluminium receiver & handguard
If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.
On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!
- Full metal construction
- 6.03mm Tightbore inner barrel
- Programmable MOSFET/ETU pre-installed
If you need a sneaky primary for mid to long-range, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG should be on your shopping list. This full metal M4/AR-15 AEG boasts Delta Armory's best internals yet, kitted out on the inside with Delta's programmable MOSFET/ETU system, a plethora of CNC machined aluminium parts, CNC steel 16:1 gears, and a high torque motor. The Delta MOSFET/ETU offers the option of 3 or 5-round burst, binary trigger and pre-cocking, all of which can be programmed in using the fire controls of the AEG itself.
Externally, this beast is ready for DMR duty, boasting a lengthy KeyMod handguard for accessories and an integral suppressor for that stealthy styling. Add an LPVO scope and the look is complete, whether you're going for a full high-FPS DMR build or simply seeking an accurised assault rifle. If you like integrally suppressed AR builds and are looking for a longer alternative to the common short configurations, the Delta Armory DA-A10-ETU ALPHA™ Silent Ops DMR M4/AR-15 AEG is a fantastic choice!
- 6.05mm Tightbore inner barrel
- Quick change spring
- AR9 and STANAG compatible
Offering you the best of both worlds, the SRC SR4 ST Falcon-ZS lets you choose between using AR9 and STANAG magazines by using the handy included receiver adaptor. It's lightweight and compact design make the Falcon perfect for run and gun CQB playstyles.
With an integrated suppressor and PDW stock for that operator style, the Falcon boasts a wealth of other features such as MLOK front handguard, 20mm top rail and flip up ironsights, 280 round 9mm magazine as well as removable magwell grip the Flacon has a lot to love in a compact package.
- Full metal construction
- Licenced by Noveske Rifleworks
- CYMA Platinum MOSFET & 13:1 gears!
If you seek a compact, full metal M4 platform with a realistic build and licenced trademarks, the EMG Noveske 7.5" Gen.3 DIPLOMAT AEG should be in your crosshairs. A CQB-optimised alternative to the carbine length Noveske INFIDEL, the DIPLOMAT boasts an intimidatingly loud muzzle report thanks to its pre-installed KX-3 Firepig flash suppressor, a detailed replica of the Noveske NSR-7.5 M-LOK handguard and Noveske Gen.3 upper receiver and plenty of pre-upgraded internal parts thanks to the OEM, CYMA Platinum.
Internally, the DIPLOMAT is kitted out with the impressive CYMA Platinum E-Edition gearbox, complete with a pre-installed MOSFET, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades.
Externally, things are par for the course for EMG, with a flawless build with all the authentic details and perfectly replicated Noveske trademarks, available in black, tan or Noveske's unique "Bazooka Green". If you're looking for a short-barreled AR platform with pre-upgraded internals focused on speed and a flawlessly realistic build, the Gen.3 DIPLOMAT will do the trick!
- Full metal construction
- Licenced by Noveske Rifleworks
- CYMA Platinum MOSFET & 13:1 gears!
If you seek a compact, full metal M4 platform with a realistic build and licenced trademarks, the EMG Noveske 7.5" Gen.3 DIPLOMAT AEG should be in your crosshairs. A CQB-optimised alternative to the carbine length Noveske INFIDEL, the DIPLOMAT boasts an intimidatingly loud muzzle report thanks to its pre-installed KX-3 Firepig flash suppressor, a detailed replica of the Noveske NSR-7.5 M-LOK handguard and Noveske Gen.3 upper receiver and plenty of pre-upgraded internal parts thanks to the OEM, CYMA Platinum.
Internally, the DIPLOMAT is kitted out with the impressive CYMA Platinum E-Edition gearbox, complete with a pre-installed MOSFET, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades.
Externally, things are par for the course for EMG, with a flawless build with all the authentic details and perfectly replicated Noveske trademarks, available in black, tan or Noveske's unique "Bazooka Green". If you're looking for a short-barreled AR platform with pre-upgraded internals focused on speed and a flawlessly realistic build, the Gen.3 DIPLOMAT will do the trick!
- Full metal construction
- Kestrel Basic ETU Pre-installed
- 6.03mm Tightbore inner barrel
For those in search of a beefy DMR base platform, this is the one. The East Crane EC-204 G-417 Semi-Automatic DMR AEG is ready to be converted straight into a DMR with its quick-change spring system and preinstalled Kestrel Basic Eshooter MOSFET. As it comes this rifle does not have full-auto enabled, this can however be turned back on using the MOSFET. The omission of full auto straight out of the box is the cherry on top and solidifies this platform as the perfect DMR replica.
This unique-looking rifle is based on a German-manufactured service rifle, the extended handguard is great for longer scope setups and any additional attachments you may require to complete your operations. If you require an outstanding DMR-ready platform for your milsim escapades, your prayers have been answered with the East Crane EC-204 G-417 Semi-Automatic DMR AEG, all you need is a massive scope and sneaky suppressor and you will be ready for the battlefield!
- Full metal construction
- Kestrel Basic ETU Pre-installed
- 6.03mm Tightbore inner barrel
For those in search of a beefy DMR base platform, this is the one. The East Crane EC-204 G-417 Semi-Automatic DMR AEG is ready to be converted straight into a DMR with its quick-change spring system and preinstalled Kestrel Basic Eshooter MOSFET. As it comes this rifle does not have full-auto enabled, this can however be turned back on using the MOSFET. The omission of full auto straight out of the box is the cherry on top and solidifies this platform as the perfect DMR replica.
This unique-looking rifle is based on a German-manufactured service rifle, the extended handguard is great for longer scope setups and any additional attachments you may require to complete your operations. If you require an outstanding DMR-ready platform for your milsim escapades, your prayers have been answered with the East Crane EC-204 G-417 Semi-Automatic DMR AEG, all you need is a massive scope and sneaky suppressor and you will be ready for the battlefield!
- Compensator
- 20mm Pistol Rail
- Light Enhancing Sight
The Army Armament R604 is a Gas Blowback Airsoft Pistol based on the Hi-Capa frame, which is known for its good gas performance due to large Magazines. The lightweight Slide also benefits the Pistol's performance, by having less weight to move around, giving it a snappy Trigger Response and better cold weather performance than standard.
- Refined Slide
- CO2 Powered
- Flared Magwell
Everyone's favourite Puppy-Avenging Pistol is back with a bang, and freshly updated for modern Competition Shooters with a CO2 Magazine out of the box, and a refined and newly cut Slide to reduce overall weight and take its performance into overdrive. If you're looking for a Pistol that is going to make a statement, this is definitely it.
- Full metal construction
- 6.02mm Tightbore inner barrel
- RMR Footprint slide - Optics ready
If you are looking for a modern Hi-capa based build with speedy looks and surprising performance, keep your eye on the Golden Eagle Hi-capa 4.3 Dusty Snake! This full metal GBB pistol sports full Tokyo Marui compatibility, a 6.02mm tightbore inner barrel and an optics-ready slide with the common RMR mounting standard.
Boasting all the frills that make the modern Hi-capa platform such a competitive piece, the Dusty Snake is equipped with a stylish compensated front end, flared magazine well extension and even a hand-stippled grip; giving you exceptional gripping qualities whether you rock gloves to a skirmish or not. As a trusty sidearm or a primary pistol for CQB, you cannot go wrong with this remarkably affordable and beautiful gas blowback pistol!
- Ceramics Whirl Valve
- Extremely Consistent
- Split Slide Design
One of the latest pistols designed and built in-house by G&G this pistol does not disappoint. Carrying on the success from the GTP 9 this pistol contains all the latest advances in Airsoft pistol design, with a uniquely designed hop-up system and ceramic whirl valve designed to improve efficiency, reduce cool down, and enhance your Airsoft experience.
- Full metal construction
- Integrated 3x telescopic scope
- Iconic silhouette!
The Army Armament R902 Aug Military Model Railed AEG is an iconic replica of the Austrian military rifle. It is certainly one to add to your assault rifle collection. It has also been seen in Australia and New Zealand and was also wielded by Karl, the mercenary companion to Hans Gruber during their attempted takeover of Nakatomi Headquarters in the 1988 movie Die Hard.
The R902 boasts full metal construction, a long inner barrel and an integrated 3x optical sight, it is a more modern iteration of the AUG with the addition of multiple 20mm rail sections for accessories not commonly associated with AUG platforms, such as flashlights, lasers and backup sights. Join the elite, equip yourself with an AUG and benefit from the improved handling, and the long barrel of this fantastic Airsoft AEG version of a near-perfect real-world design!
- Full Alloy Slide
- Semi / Full Auto
- Gas Blowback Pistol
A Fully Automatic and Semi Automatic Generation 4 (Gen4) Gas Blowback Airsoft 6mm Pistol, designed with the longest barrel of the series, giving it the most power and kick out of all the EU-Series range.
- Integrated Sight
- Railed Handguard
- Folding/Sliding Stock
A dense and well constructed G36 family Airsoft replica, which is powered by electric features an integrated telescopic sight as part of the carry handle, as well as a multi-position sliding and folding stock.
- Railed Handguard
- 14mm CCW Thread
- ZnAl Upper Receiver
The CYMA Blue Limited Edition series are a premium line of Airsoft Electric Guns which featured upgraded internals over what you would normally expect from a tactical Airsoft SMG-5 replica.
- Ambidextrous controls
- 6.03mm Steel tightbore inner barrel
- Microswitch trigger - Ferocious trigger response
Those who love to exchange fire at kissing distance, ARCTURUS has a treat for you! The AT-NY05 Karambit Lite is a super short and light M4/AR-15 platform with a well tuned gearbox packed with pre-upgraded parts, and ambidextrous controls to keep both left and right-handed shooters happy!
The Karambit Lite makes use of the same superb internals as the full metal Karambit, but has a high density polymer receiver designed to match highly modern "billet" AR-15 receivers for a cutting edge look. The Karambit Lite is a pocket rocket, small enough to cut any corner nice and tight, but capable of surprising accuracy thanks to its steel 6.03mm tightbore inner barrel and rotary HOP-up combination. The choice of CQB primary just got harder!
- 20mm Rail
- Gas Blowback
- Fully Automatic
A Gas Blowback Semi-auto / Fully Auto Airsoft pistol, based on the Samuri Edge pistol used by the Resident Evil Game Series Character 'Barry Burton'.
- Full metal construction
- URX2 style aluminium handguard
- Preinstalled programmable MOSFET
If you are in the market for an M4/AR-15 optimised for woodland warfare this one would suit you well! The Specna Arms SA-B03 ONE™ replicates the real-world SR-16 rifle, a high-end M4/AR-15 rifle from the US. Like the original SR-16, the Specna Arms version boasts a 10.5-inch free-floated handguard known as the "URX2", an extended handguard with ample rail space, QD sling sockets built-in and perfectly suited to the modern C-clamp grip technique.
On the inside, the SA-B03 has been upgraded to handle stronger springs, sporting a steel quick change spring guide mounted on ball bearings for reduced rotational stress, an aluminium cylinder head and piston head, reinforced steel gears and a lightweight polymer piston with a full rack of steel teeth, plus the added benefit of the programmable Kestrel Basic MOSFET. If you are looking for a base gun for a DMR project this would do the job perfectly thanks to its 16-inch outer barrel and the Enter & Convert™ quick change spring system!
- Full metal construction
- 6.03mm Tightbore inner barrel
- Kestrel Basic ETU pre-installed
If you're a skirmisher who prioritises style, the Specna Arms SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU should suit you perfectly! This is the latest version of the SA-V26 Red Edition, with thoroughly revamped internals to keep it competitive with the latest Airsoft releases. The most prominent change is the addition of the Eshooter Kestrel Basic ETU, offering plenty of slick functionality previously reserved for far more expensive, high end replicas.
The Kestrel Basic offers programmable fire modes including 3-round burst and binary trigger, adjustable pre-cocking, active braking, cycle completion, low battery warning and low/high voltage protection. The Kestrel keeps your gearbox cycling at maximum efficiency and with pre-cocking set, provides an incredibly snappy trigger response ideally suited to rapid double taps. Also inside is a 6.03mm tightbore inner barrel and rotary HOP-up unit, bringing the latest iteration of the ONE™ series into line with EDGE™ and EDGE 2.0™ platforms with improved accuracy potential and the latest HOP-up unit design for M4 AEGs.
If you love an AR that stands out, rocking a customised look straight out of the box, the SA-V26 ONE™ Red Edition M4/AR-15 LVOA AEG; Kestrel Basic ETU is exactly that. An impressive reinvention of a popular previous release with the latest tech inside, this is the AR platform for skirmishers with a sense of style!
- 11.1v LiPo Ready
- G&G G2 Gearbox
- Stops Firing On Empty
A fully licensed and rock-solid AR platform Airsoft Electric Gun which is built to a stunning standard using CNC Machined Alloy, and features G&G's G2 Gearbox which means a programmable Electronic Trigger, 11.1v LiPo compatibility and a realistic system that stops the gun firing if there's no magazine or BBs inserted.
- Adjustable Velocity
- Stamped Steel Receiver
- EFCS / Electronic Trigger
Calling all British Army loadouts!! This is the absolute greatest L85 platform Airsoft Replica the market has seen yet, but we didn't need to tell you that. Featuring Stamped Steel and CNC Aluminium construction, a realistic Electronic Blowback, a Microswitch Trigger, Functional Bolt Lock System, Electronic Fire Control System and SO much more, this is the ultimate Airsoft Replica of a British Army standard. As an added bonus, it comes supplied in a gorgeous Hard Case that has been purpose-formed for the Rifle.
- Rotary Hop Unit
- Steel Construction
- 14mm CCW Thread
A Steel constructed member of the G3 Family which features a 20mm Railed Handguard, Steel Receiver, Sliding Crane Stock and 14mm CCW Threaded Barrel.
- Full Alloy Construction
- 40mm Moscart Launcher
- Fits 20mm Rail & M16 Barrel
A full metal M203 style Airsoft Grenade Launcher by Double Bell, designed to fit onto either a 20mm RIS rail or the underside of your M4A1 / M16 this 203 launcher adds a uniquely menacing look to your gun!
- AR Buffer Tube
- Accepts M4 Mags
- Threaded Outer Barrel
Love the look of the AR36 platform but don't want to have to buy a tonne of new mags? Share M4 mags with your friends with this AR36 variant which comes with a mag adaptor and AR buffer tube pre-installed.
- Full metal construction
- 6.03mm Tightbore inner barrel
- Red dot sight pre-installed
If you like compact sidearms with an elite look, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight is one to watch. This full metal Hi-Capa platform marries the 3.8-inch barrel length of the most compact Hi-Capa pistols with the full-sized 5.1 frame, giving you the design philosophy of the Glock 19X in Hi-Capa form.
Like other Hi-Capas in the VORSK CS range, the Hi-Capa Vengeance Compact boasts full metal construction, a 6.03mm tightbore inner barrel to enhance accuracy and a threaded outer barrel with a 14mm thread adapter so you can mount a tracer right away. This, the "BDS" version is also equipped with a red dot sight, pre-installed on a fixed position mount for fast target acquisition and even faster follow-up shots when compared to pistols equipped with a slide-mounted red dot sight.
If owning a customised Hi-Capa is on your list, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight has done all the work for you! With the high-end aesthetic on the outside and a 6.03mm tightbore barrel on the inside, the Vengeance Compact with red dot sight is ready to rock either as a sidearm or a CQB primary!
- Full metal construction
- 12mm CW female threads w/ 14mm CCW adapter
- Raised light-enhancing iron sights & flared magwell
If you have a fiery passion for Airsoft and you need a sidearm to display this, the VORSK EU18 Red Match is the one! This GBB pistol marries EU series handling and performance with VORSK's unique aesthetic, rocking metallic red accents, front slide serrations, raised light-enhancing iron sights, a flared magazine well and a threaded barrel, ready for your suppressor or tracer unit.
As with VORSK's other EU-series offerings, the EU18 Red Match is compatible with common EU series magazines from VORSK, RAVEN or WE and is kitted out with a 6.03mm tightbore inner barrel straight out of the box, promising improved accuracy potential and a slight raise in FPS when compared to its rivals. If you like your sidearm with a side order of style, the EU18 Red Match will suit you well and is not afraid to stand out!
- Fibre optic iron sights
- Compensator mounted
- Pre-two tone - Immediate dispatch!
Wondering why VORSK has left the F226 design out when producing fancy pistols? They haven't! Fresh in we have the VP26X Gas blowback pistol, an F226 but not like you've seen before. Complete with a ported slide, fiber optic iron sights and an aggressive compensator with a strike face, you'll be hard-pressed to add anything else to this well-equipped pistol. Though it does include a suppressor adaptor...
- Full metal construction
- 6.03mm Tightbore inner barrel
- Red dot sight pre-installed
If you like compact sidearms with an elite look, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight is one to watch. This full metal Hi-Capa platform marries the 3.8-inch barrel length of the most compact Hi-Capa pistols with the full-sized 5.1 frame, giving you the design philosophy of the Glock 19X in Hi-Capa form.
Like other Hi-Capas in the VORSK CS range, the Hi-Capa Vengeance Compact boasts full metal construction, a 6.03mm tightbore inner barrel to enhance accuracy and a threaded outer barrel with a 14mm thread adapter so you can mount a tracer right away. This, the "BDS" version is also equipped with a red dot sight, pre-installed on a fixed position mount for fast target acquisition and even faster follow-up shots when compared to pistols equipped with a slide-mounted red dot sight.
If owning a customised Hi-Capa is on your list, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight has done all the work for you! With the high-end aesthetic on the outside and a 6.03mm tightbore barrel on the inside, the Vengeance Compact with red dot sight is ready to rock either as a sidearm or a CQB primary!
- Alloy Top Slide
- Top & Bottom Rails
- 14mm CCW Thread
A Gas Blowback Airsoft Pistol that is based on the AAP / EU Series, giving you the cool design of a Ruger-style Pistol, with the tough and realistic construction of a WE Pistol, and all the Semi/Full Auto fun you could want! This space-age Pistol comes supplied with a top and underside 20mm Rail, as well as a Threaded Barrel and Low Light Ironsights, making this a strong choice for any Airsoft player wanting to make a statement.
About 20mm Picatinny RIS/RAS Rail Equipped Airsoft Guns
Many Airsoft guns use 20mm Picatinny rails as their primary attachment interface, offering a wide variety of accessory options which can be mounted to suit the users' preferences. 20mm Picatinny rails can be used to mount vertical or angled foregrips, tactical flashlights, lasers, red dot sights and scopes, and even 40mm grenade launchers, offering easy customisation and the ability to change configurations quickly and with minimal tools.
If you need access to the widest pool of Airsoft accessories, a 20mm Picatinny rail-equipped gun would be the right call. Some 20mm equipped rifles have individual rails on the handguards, and others have four-point RIS/RAS style quad rail handguards with rails at the 3, 6, 9 and 12 o'clock positions. The advantage of a quad rail handguard is the ample rail space you have to mount accessories, though a quad rail may make the front end of the rifle heavier as a result, especially if you deck it out!
From US Army style M4A1s with RAS quad-railed handguards to AR36s with individual rails mounted to the handguard, you have all the options when it comes to 20mm rail equipped guns here at Patrol Base. Whether you are a milsim skirmisher looking for a MK18 or HK416, or you are an AK fan looking for a PMC-style AK with 20mm rails, you will find them here!