RIS/RAS Rail & Attachments

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

If you play a lot of CQB, a tactical flashlight will be an asset to your setup. The Delta Armory Defender Shield Tactical Flashlight is a highly flexible unit capable of being used as a handheld light or weapon light, packaged with a pressure switch tail cap and equipped with a push button tail cap as it comes. Also included is a 20mm Picatinny ring mount to allow you to mount it to your primary and a lanyard so you can carry it as a handheld light and avoid dropping it in wet weather.

The Defender Shield is powered by the included rechargeable18650 Lithium battery but the charger is not included. Compatible chargers can be found by putting "18650 Battery Charger" into your favourite search engine. If you're kitting out your primary for CQB or night skirmishes you need this on your primary!

If you're seeking a lightweight handguard for your sleeper build, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 is a fine choice. This handguard is styled after the real steel URX 3 handguard and is constructed from high-density polymer, keeping the price and weight to a minimum.

Known as a "mock KeyMod" handguard, the attachment slots on this handguard are not compatible with most KeyMod accessories though you do have the option of mounting 20mm Picatinny accessories to the included rail sections. 3 Rail sections are included and pre-installed but can be repositioned wherever you need them on the attachment slots at 3, 6 and 9 o'clock.

Being a free-floated design, this handguard mounts directly to your receiver threads and doesn't come into contact with the barrel, meaning any force applied to the handguard won't negatively affect accuracy. Installation will probably require an M4/AR-15 barrel nut wrench and a certain level of expertise and fitting, though the handguard should fit the vast majority of M4/AR-15 AEG and GBBR platforms. If you want the style of a modern KeyMod handguard but not the weight, the Delta Armory Mock KeyMod Handguard w/ 20mm Rails for M4/AR-15 should fit the bill!

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

The UNITY mounts are being favoured world wide due to their slim profile & efficient riser, making them an excellent candidate for using with PEQ / Laser pointers mounted on the upper rail.

A flashlight design for use with pistols, the X399YH-B is easily attached to your Picatinny pistol rail for if you want to transform your pistol into more of a spec ops style. The flashlight is features aluminium construction with fantastic and robust durability that will operate in even the harshest conditions.

It features 800 lumens on a low output with a potential for 150m maximum light distance, easily switched on/off using the rear rocker switch. The torch is powered by aftermarket 123A batteries.

A flashlight design for use with pistols, the X399YH-B is easily attached to your Picatinny pistol rail for if you want to transform your pistol into more of a spec ops style. The flashlight is features aluminium construction with fantastic and robust durability that will operate in even the harshest conditions.

It features 800 lumens on a low output with a potential for 150m maximum light distance, easily switched on/off using the rear rocker switch. The torch is powered by aftermarket 123A batteries.

A highly useful and well-constructed 45 degree rail piece for 20mm rails, useful for getting your accessories in just the right place for you.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

The Delta Armory 22mm Offset Angled Mount has an aluminium alloy construction, making it tough and lightweight. It is designed to install Torches, Lasers and other 20mm RIS Accessories at a 45-degree angle, which allows you to maximise the available space you have on your Airsoft Gun.

An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories. Although designed for torches, this rail could also be used to mount an offset Red Dot Sight to use as a backup to your main sight. The Delta Armory 22mm Offset Angled Mount easily attaches to 20mm Rails via the Allen Screw on the side of the unit.

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer.

Attached to Picatinny system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.25 inches and is attached to Picatinny system using the included screws and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

If you have invested in a Tokyo Marui VSR-10 Pro and you want to add an optic, this 20mm receiver rail will do the trick! The Slong Airsoft Receiver 20mm Rail Mount For VSR-10 Sniper Rifle is designed to replace the rear iron sight on the Tokyo Marui VSR-10 Pro sniper rifle but can also be used to replace a worn-out rail on VSR-10 clones or the TM VSR-10 G-Spec sniper rifle.

The rail is constructed from aluminium and finished with matt black anodising, keeping the surface coating thin to ensure the rail remains in spec and capable of mounting any optical sight which fits 20mm Picatinny rails.

This is for those of you that want to upgrade your AK and make it more up-to date with room for customisation. Constructed from sturdy alloy, the rail system features 4 (quad) rails at the 3, 6, 9 and 12 o clock positions. The top rail offers 3.5 inches of rail real estate with the other 3 rails offering 5 inches to mount tactical equipment.

So if you find yourself wanting more room to customise your AK with more rail space, like the M4s of this world, this is what you're looking for. Designed for CYMA AKS-74U AEGs, but may potentially fit other models of AKS-74U as well. The handguard comes with a mounting device so it can be attached to the barrel and the upper handguard can be left off for those of you that prefer just running a lower.

The AK series of rifles is famous for many things, but having the best iron sights is not one of them. The AK Rear Sight Rail For Red Dot Optics from 5KU replaces your AK's rear iron sight but retains basic functionality with its built-in emergency backup sights while providing the option to mount a red dot sight!

Designed specifically for Micro red dot sights, the 8 20mm Picatinny rail slots provide plenty of room for larger red dots but it would look rather silly. It's your AK though, make the purists cry if you feel like it!

If you are in the market for a compact lightweight but very effective flashlight, then look no further! The WADSN M300C Scout Light; Dual Switch Version is a superb choice for skirmishers who are afraid of the dark, or at least what may lurk in those dark corners. This flashlight comes in two colour variants so you can match it with your loadout to keep everything looking uniform, very tactical!

The flashlight mounts onto the common Picatinny rail using its 20mm rail mount. This means it can be attached on most standard platforms with ease. Keep the future bright and those dark rooms brighter with a WADSN M300C Scout Light; Dual Switch Version!

A compact and solid Foregrip for 20mm Rail Systems, which is constructed from CNC Aluminium and is based upon a Russian grip design that is most often seen on AK Platforms, but will provide a stable platform for aiming any Rifle that has a 20mm Rail.

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. They have a two piece design which makes installation very easy, and come included with an Allen Key to help. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System.

One of the few problems with old-school cool like the SMG5 series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

If your M4/AR-15 is due a style up, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need! This unique handguard boasts hexagonal vent ports, M-LOK slots at 3, 6, and 9 o'clock and a 20mm Picatinny rail up top, ready for your choice of M-LOK or 20mm Picatinny accessories. The vent ports both look fantastic and reduce weight considerably, giving you a fast-to-point front end and slick external styling. 

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. The HEX handguard also includes the correct barrel nut to mount it, pre-installed inside the handguard and constructed from aluminium. 

As with most M4/AR-15 handguards, you'll need an M4/AR-15 barrel nut wrench to install the HEX but it should fit most M4/AR-15 receivers on the market, AEG or GBB. If you're looking for a fresh look for your AR platform and want more accessory options with less overall weight, the Delta Armory CNC Aluminium HEX M-LOK Handguard for M4/AR-15 is what you need!

If you have ever missed a kill because you had to pull off target to adjust magnification, this mount was designed with you in mind! The Ghost Quick Zoom Sliding Scope Adjuster for 20mm Picatinny Rail allows you to adjust the magnification of any adjustable mag riflescope with a rotary adjuster from a firing grip while you keep your reticle on target! Gone are the days of awkward body mechanics when adjusting your optic, giving you more opportunity to bag those all important kills in game!

The Quick Zoom Sliding Scope Adjuster is constructed almost entirely from CNC machined aluminium with steel cables and a polymer sliding button and can be fitted to any Airsoft rifle with a minimum top rail length of approximately 38cm. A spacer is included for longer setups, keeping the adjustment cables protected from snags, and also included in the box is an upper scope ring segment with a 20mm Picatinny rail built-in, allowing a micro red dot sight to be added to the setup as a backup. This combination of a dual ring scope mount, sliding button, spacer and an MRDS mount gives you a whole lot of alu for your money, and even more skirmish utility!

A Red Dot Sight for Airsoft Guns, that attaches to 20mm RIS/RAS via the Integrated Mount built in to the unit. With Backup Ironsights, an adjustable Red/Green Crosshair and tough Aluminium construction, this is a great Sight for a new and old players alike.

A Polymer constructed Thumb Rest for 20mm RIS Rail Systems, which will provide a stable platform to comfortably brace the front of your replica, enhancing ergonomics and improving comfort when aiming for long periods of time.

An Aluminium constructed Rail Mount for AKS-74U Platform Airsoft Replicas, which will install to the Rear Ironsight Block and provide a 20mm RIS/RAS Rail for installing a Red Dot Sight. If you own an AKS-74U and you want to start decking it out with bells and whistles, then this is an ideal place to start.

The G-Series Carbine Kit is a Polymer extension for the forend of an Airsoft G-Series pistol that gives the user 2 x RIS Rails to add accessories, and the ability to carry an extra magazine in ready position for a quick reload.

The G-Series Carbine Kit is a Polymer extension for the forend of an Airsoft G-Series pistol that gives the user 2 x RIS Rails to add accessories, and the ability to carry an extra magazine in ready position for a quick reload.

If you are in need of a compact tactical flashlight for a short-barreled rifle or SMG setup an M300 pattern light is one of the best options out there. This variant, the WADSN M300 Scout Tactical Flashlight w/Diffuser Cover uses an M300 light body coupled with a specialised head with a built-in diffuser cover which can be quickly flipped out of the way when not needed.

The diffuser is designed to spread the light throw out to more effectively distract and disorient enemy players when entering a room and flipping it aside will narrow the beam for long range engagements. Being based on an M300 scout light body means you can use alternative scout light mounts, tail caps and other scout light accessories to set it up to suit you perfectly.

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

If you're attached to your optic and don't want to see it get blasted, a Lens Protector is what you need! The Guerilla Tactical Lens Protector for 20mm Picatinny Rails sits in front of your optic to take the impact of a BB so your sight stays safe. The protector can be flipped down for storage or transport and is constructed from a durable Perspex with an alloy mount. 

If you're worried about getting your optic shot out, this is a far cheaper alternative rather than buying a whole new optic. If you'd rather replace a cheap lens protector than your favourite scope, the Guerilla Tactical Lens Protector for 20mm Picatinny Rails is essential!