RIS/RAS Rail & Attachments

For CQB, and for low light situations, there is no greater helping hand in the field than a tactical flashlight. The M340A Scout Light Pro from WADSN is the latest variant of their M3xx mini scout light series and comes complete with a low profile, angle adjustable mount for 20mm Picatinny rails, an angle adjustable M-LOK/KeyMod mount, and both the push button tail cap and the pressure switch tail cap. This light reportedly pumps out 540 lumens and literally turns night into day with its dazzling brightness!

If you are having a hard time seeing down your low-profile red dot sight, this rail riser will make all the difference! The PJ 0.83" Mini Riser Block Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight

If you're running a KeyMod handguard but want to use 20mm Picatinny accessories, these are what you need! The ASG 20mm Picatinny Rail Adapters for KeyMod; Set of 3 is constructed from alloy, including 2 short 5-slot rails and one 9-slot rail and the screws you'll need to mount them. 

As with other KeyMod accessories, these rails can be positioned wherever you need them and are compatible with metal KeyMod handguards but won't fit polymer mock-KeyMod handguards. If your favourite vertical grip only comes in 20mm Picatinny flavour or you want to mount a flashlight or PEQ laser to the side of your KeyMod handguard, the ASG 20mm Picatinny Rail Adapters for KeyMod; Set of 3 will sort you out!

A universal Bipod made to a high standard from Alloy, which attaches to standard Bipod Lugs, but also comes supplied with an Adapter to install the unit to a 20mm RIS Rail.

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

The DBAL-PL is the absolute pinnacle of pistol torches, offering the kind of functionality most Airsofters will never need, but all of them want! The DBAL-PL from WADSN provides a red aiming laser, a white LED light, and both an infrared laser and infrared illuminator all in one unit! The DBAL-PL is designed for use on pistols, but also looks awesome and functions perfectly when mounted to the lower rail of an assault rifle or submachine gun setup. If you own real NODs(lucky!) or any form of night vision and intend to use it for skirmishing, only a DBAL-PL will do it justice!

The DBAL-PL is the absolute pinnacle of pistol torches, offering the kind of functionality most Airsofters will never need, but all of them want! The DBAL-PL from WADSN provides a red aiming laser, a white LED light, and both an infrared laser and infrared illuminator all in one unit! The DBAL-PL is designed for use on pistols, but also looks awesome and functions perfectly when mounted to the lower rail of an assault rifle or submachine gun setup. If you own real NODs(lucky!) or any form of night vision and intend to use it for skirmishing, only a DBAL-PL will do it justice!

A set of four Ladder Type Rail Covers which are made from a semi-rigid Rubber, and will easily slot over 20mm Rails to provide a more flush aesthetic, and to make the rail much more comfortable to hold. This is the perfect addition to any Rail System that has unused slots which are uncomfortable/unsightly. The Rail Covers are easy to manipulate, and simply need to be stretched over 20mm RIS to fit. They can even be cut to length if you require something more boutique.

A set of four Ladder Type Rail Covers which are made from a semi-rigid Rubber, and will easily slot over 20mm Rails to provide a more flush aesthetic, and to make the rail much more comfortable to hold. This is the perfect addition to any Rail System that has unused slots which are uncomfortable/unsightly. The Rail Covers are easy to manipulate, and simply need to be stretched over 20mm RIS to fit. They can even be cut to length if you require something more boutique.

If you are looking for a lightweight tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

If you're looking for stylish and realistic external upgrades for your M4/AR-15, you should consider the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail! This CNC-machined free-floated handguard boasts M-LOK slots at the 3, 6, & 9 o'clock positions with a 20mm Picatinny rail along the top. It comes in 4 different lengths: 7.5 and 9.5-inch for CQB builds, 10.5-inch for mid-length and 12.5-inch for carbine-length platforms.

The SR stands for suppressor-ready, as this handguard has space within for a 1.5" diameter Airsoft suppressor. This provides an integrally suppressed look which is sleek and stylish, matching modern AR15 systems. It also comes with Griffin Armamnet trademarks, adding to the style and realism.

Compatibility-wise, this handguard should fit most M4/AR-15 AEG and GBBR rifles with mil-spec receiver threads, which is almost all of them, thankfully. If you want to enhance the aesthetic and accessory options of your M4/AR-15 rifle, the PTS Syndicate Griffin Armament® SR-Rigid M-LOK Rail will do the trick!

A tough Polymer foregrip for 20mm rail systems, that has an instantly-deployable spring-loaded bipod inside for when you need to hit the ground and achieve a stable shooting position fast.

This is a Dummy PEQ Box that is designed to look like a Laser/Light Module, but is actually an empty shell that can be used to hide a Battery for your Airsoft Gun.

If you're always bending your neck awkwardly to look down sights, the Novritsch High Riser Mount for Red Dot Sights will cure that! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a steel mounting bolt to secure it to your Airsoft platform's rail.

Constructed from CNC machined aluminium with a steel mounting bolt, this mount fits the Novritsch Red Dot Sight V3, Vector Optics Maverick and Maverick Gen II, Vortex Sparc Solar and Holosun 403B. It should also fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard. Being slightly higher than a standard T1 mount, the Novritsch High Riser Mount for Red Dot Sights is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you like to keep your smile pretty by wearing lower face or full face protection, the Novritsch High Riser Mount for Red Dot Sights will let you get on target without straining your neck

If you are looking for a lightweight and compact tactical flashlight with more of an integral look, the WADSN WML should fit the bill! The sleek design of the WML keeps the light tight into your weapon to minimise snags and its integral switch makes it great for compact weapons with less rail space. The WML is designed with a wide variety of modes to choose from, and an integral Picatinny mount with spring loading to guarantee a tighter fit even on off-spec rails. This flashlight provides both momentary and constant on, as well as a stroboscopic mode to dazzle the enemy and give you a few extra moments to get the kill as you clear rooms in CQB.

If you want to add a tactical flashlight to your Airsoft pistol, the NUPROL NX200 would be a fine choice. The NX200 is constructed from alloy, and sports a bright CREE LED with 200 Lumens output. 

The NX200 has a 20mm Picatinny rail mount built into the body, offering quick mounting and removing without the need for tools, and has a built in ambidextrous "rocker" switch, which offers both momentary and constant-on for both left and right-handed shooters. The rocker switch is placed perfectly to be activated with either the tip of your trigger finger, or your reaction hand thumb, making the NX200 remarkably intuitive to use, and easy to become proficient with. If you want to take your pistol game to the next level, the NX200 will get you there! 

Please Note: The Colour of the bronze variant has changed in our most recent batch, it is now much lighter than the images show. Please refer to the colour swatch in the "Specification" section for a more accurate representation of the new "Light Bronze" finish. Product Images will be updated shortly. 

If you want to add a tactical flashlight to your Airsoft pistol, the NUPROL NX200 would be a fine choice. The NX200 is constructed from alloy, and sports a bright CREE LED with 200 Lumens output. 

The NX200 has a 20mm Picatinny rail mount built into the body, offering quick mounting and removing without the need for tools, and has a built in ambidextrous "rocker" switch, which offers both momentary and constant-on for both left and right-handed shooters. The rocker switch is placed perfectly to be activated with either the tip of your trigger finger, or your reaction hand thumb, making the NX200 remarkably intuitive to use, and easy to become proficient with. If you want to take your pistol game to the next level, the NX200 will get you there! 

Please Note: The Colour of the bronze variant has changed in our most recent batch, it is now much lighter than the images show. Please refer to the colour swatch in the "Specification" section for a more accurate representation of the new "Light Bronze" finish. Product Images will be updated shortly. 

If you're in search of a sling solution which easy to mount and remove, the Vector Optics QD Sling Socket & Swivel for 20mm Picatinny Rails is ideal. This set includes a QD sling socket for 20mm Picatinny rails and a QD sling swivel, allowing you to quickly remove your sling without the usual detangling process. The included swivel should fit most slings on the market and is constructed from steel for maximum strength. 

To release the swivel from the socket, simply press the central button and it will pop straight out. Remounting it is as simple as pushing the swivel back into the socket where it will lock in place. The socket should also be compatible with aftermarket QD swivels but due to differing specs between manufacturers, we always advise giving the swivel a thorough test before entrusting it with the weight of your platform. 

A pair of 20mm RIS compatible raised scope mount rings, designed to raise up optics to the user's eye-level, or fit larger scopes onto their Airsoft guns. 

This Airsoft bipod would be right at home on any sniper rifle or DMR platform. It features an adjustable height with spring-loaded legs so you can get straight to shooting when you find the perfect camping spot. It mounts straight onto 20mm Picatinny rails making it ideal for rifle handguards or sniper rifles with Picatinny sections, such as the Novritsch SSG10 A3. Also included in the box is a sling swivel bipod mount, so you can attach this bipod to other sniper rifles without Picatinny rails.

Its aluminium construction keeps it lightweight but incredibly durable, you won't even notice it attached to your platform until its time comes to be deployed on the battlefield.

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

If you like to keep pace with the latest British Army-issued firearms, you must be planning a KS-1/L403A1 build! The Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is the handguard you need to complete it. Constructed from superb quality CNC aluminium with flawlessly crisp matching, this rail is phenomenal quality, as we might expect from Airsoft Artisan. 

The L403A1 handguard measures 13 inches in overall length and is equipped with a 20mm Picatinny rail on top and M-LOK slots at 3, 6 and 9 o'clock positions with extra slots at the offset angles so you can position your accessories perfectly. Also included in the box is a set of outer barrel shims to completely eliminate wobble, allowing the L403A1 handguard to be paired with a wide variety of barrels on PTW, GBBR and AEG M4/AR-15 platforms. If you're working on a KS-1 build and want it to be stitch-perfect, the Airsoft Artisan 13" L403A1 M-LOK Handguard for M4/AR-15 AEG / GBB / PTW is a must!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the  Vector Optics Picatinny Rail Section for KeyMod; 124mm is what you need! This 20mm rail section is constructed from Aluminium and has 124mm of available rail space, so you can mount your mission essentials anywhere. This rail has a sleek skeletonised look, with weight-reducing cutouts and less angled corners, keeping your rail slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the Vector Optics Picatinny Rail Section for KeyMod; 124mm is ideal. KeyMod is cool but you can't go wrong with some extra 20mm Picatinny rail space!

If you've got wires hanging off your primary getting in the way, the FMA Low-profile Admin Clips for 20mm Picatinny Rail; 60PCS Set will fix that! Designed to do double duty as rail covers and wire admin clips, these nifty little pieces of polymer keep your wires out of the way thanks to a recess cut in the centre allowing your wiring to run through. These mount to 20mm Picatinny rails and all you need to do to install them is clip them on!

The set also includes a number of clips for running your wires at the side of your rail, giving you plenty of options, all of which keep your setup neat and tidy. Creating a textured surface to enhance grip thanks to the slight separation between each clip, the Low-profile Admin Clips can also be used to add traction to handguards of various lengths, avoiding the need to cut conventional rail covers to length. If you want your primary to look more professional, these are the key!

A set of two Rail Pieces for KeyMod Handguards, which will provide 3" of 20mm RIS/RAS each. They are easy to install to any KeyMod Rail System, and are a great alternative to purchasing KeyMod compatible accessories.

If you like your rifle looking like a real steel rifle then you need this! The G&G Armament Knights Armament URX4 13'' Handguard is a replica of a real steel handguard but much more affordable and designed specifically for Airsoft. It is constructed from superb CNC aluminium with a flawless finish, guaranteeing perfect in-spec attachment. A tremendous handguard designed for those who like to keep their platforms looking stylish and effective.

This handguard measures 13 inches in overall length and is equipped with a 20mm Picatinny rail on top and M-LOK slots at 3, 6 and 9 o'clock positions with extra slots at the offset angles so you can position your accessories in the perfect position. The handguard also comes equipped with steel QD points at the receiver side. This is perfect for those who like to sling their rifles or use other QD attachments.

A tough and simple bipod for 20mm rail systems, which offers a stable platform to rest your rifle either for display, or to take a prone position and catch the enemy by surprise.

If you want your MCX build to stand out, the Airsoft Artisan 10" SUR300 Handguard, Suppressor & Outer Barrel for MCX Virtus will do the trick! This set includes a CNC aluminium wide-profile M-LOK handguard, a 7-inch aluminium outer barrel and an SRD762 suppressor replica, also machined from aluminium with flawless engraved markings. If you were umming and ahhing about how to deck out your MCX, this kit is a great all-in-one external upgrade!

The SUR300 is the .300 Blackout upper receiver set for the real MCX, offered as a kit to Military and Law Enforcement customers and also to civilians in a slightly longer form to keep the ATF happy. When built up, the SUR300 is absolutely beastly looking, a marriage of the menacing AAC Honey Badger's integrally suppressed aesthetic with the more modern receiver style of the MCX.

Being an Airsoft Artisan set, you better believe this is at the absolute pinnacle of Airsoft quality and well-suited to the equally gorgeous SigAir MCX Virtus. If you're into cutting edge modern platforms with a stealthy aesthetic, get the SUR300 Handguard, Suppressor & Outer Barrel belong on your MCX!