Delta Armory DA-C05 CHARLIE™ AEG; Patrol Base Starter Bundle

Patrol Base has teamed up with Delta Armory to bring you the ultimate Airsoft starter bundle to get you off on your Airsoft Adventure with a flying start. The DA-C05 is a well-known and respected M4 AEG that is both lightweight and sturdy and is well-equipped on the inside to go toe to toe with anything else out there.

The DA-C05 bridges the gap between CQB and outdoor skirmishing; A Jack of all trades, master of most! With 2 batteries included in the box with a UK 3-pin charger and 3 mid-cap magazines with 1000 match-grade BBs, this starter bundle will equip you for both short-duration intense CQB skirmishes and outdoor skirmishes that last all day. Featuring Patrol Base and Delta Armory branded decals to complete the look!

---

If you like your ARs with a side of stealth, this should get your juices flowing! The Delta Armory DA-C05 CHARLIE™ M4/AR-15 Silent Ops 7 AEG, giving you most of the pre-upgraded internals present in the ALPHA™ range, contained inside a high density polymer shell with an alloy outer barrel, resulting in the same impressive downrange effect with considerable weight savings. 

You may have seen this style of AR before, but the Delta Armory example has surpassed previous examples in our opinion. Inside, you will find a 6.03mm tightbore barrel, Berserker HOP-up bucking and rotary HOP-up unit, along with a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide for easy power tuning. Adding to its box of affordable tricks, the DA-C05 features the Delta Armory battery stock, allowing for larger batteries to be installed for full-day performance, along with a gunfighter-style pistol grip to enhance ergonomics. 

Starting at the front end we can find a pre-installed suppressor which covers the 330mm 6.03mm tightbore inner barrel, mounting to the 5-inch alloy outer barrel. This gives the Silent Ops 7 the look of an integrally suppressed AR with a compact front end which makes it easy to take corners in CQB. The suppressor mounts to 14mm CCW male threading but due to the inner barrel length, a barrel extension will be required to mount a tracer unit.

Surrounding the suppressor we have a polymer 20mm Picatinny Quad Railed handguard with 20mm rails at the 3, 6, 9 and 12 o'clock positions, ready for any 20mm accessories you choose to add to complete your mission. Styled after the real steel KAC RIS, the handguard has a realistic look and unlike similar integrally suppressed platforms with KeyMod or M-LOK handguards, you will never have trouble mounting mission essentials to the quad rail of the DA-C05 as it doesn't require clearance between the handguard and suppressor. 

The receiver follows the familiar M4/AR-15 format but is styled up with some unique Delta Armory flair. Constructed from high density polymer with angled surfaces and gripping texture on the front of the magazine well, this receiver is rocking the "billet" aesthetic, mimicking real enhanced AR-15 receivers constructed from a single block of aluminium. The finish on the receiver is consistent and strong enough to resist scratches more effectively than most metal receivers, making the Silent Ops 7 ideal for those who skirmish like a bull in a china shop!

In our Patrol Base Starter Bundle, the DA-C05 is rocking the Patrol Base Star logo on the left side of the receiver, where you'll find the manufacturer roll marks on a real AR-15 rifle. These markings are unique to this platform and there are only 1000 in existence. The fire selector/Safety can be found on the left side, positioned just above the pistol grip for fast access from a firing grip. The selector provides 3 modes of fire; Safe, semi-auto and full auto, with a 90-degree throw between each mode. The modes are all indicated with modern bullet pictograms, with a crossed-out projectile for safe, a single projectile for semi and multiple projectiles for full auto. The magazine release is on the right side of the magazine well and is easily reached from a firing grip with the trigger finger, allowing for super swift emergency reloads and the enviable handling the M4/AR-15 platform is known for.

The mock bolt catch is located in the centre of the left side of the receiver, and while this is a dummy control which doesn't provide a function it is nonetheless a separate part to maintain the realistic appearance and avoid the tell-tale signs of being a replica. The dummy forward assist is present on the right side of the upper receiver, right where it should be. This control does nothing on an AEG, and some real AR shooters argue it does nothing on the real thing, but it is included on the Silent Ops 7 to keep the rifle faithful to real M4/AR-15 rifles.

The charging handle is located at the top rear of the receiver and doesn't need to be pulled before the first shot. It instead serves to retract the mock bolt carrier and open the dust cover on the right side of the upper receiver, giving us access to the rotary HOP-up unit inside. The HOP-up allows you to tune the flight path of your BBs and set the DA-C05 up for different ammo weights, looking for the flattest trajectory possible. 

The use of the rotary adjuster style is a nice touch and futureproofs the Silent Ops 7 with the most modern HOP-up design for the M4/AR-15 platform, boasting an improved ability to hold its setting under the vibrations of firing and being adjustable in finer increments than the older "gear" adjuster design. An extra bonus present in the DA-C05 Patrol Base Starter Bundle is the pre-installed Psionics Berserker HOP-up bucking, providing superb range and accuracy far exceeding rival platforms, especially when used with 0.28g BBs!

The Pistol Grip of the Silent Ops 7 boasts a refined grip angle for greater comfort when shooting with the stock fully collapsed and in more modern shooting stances. Based on the real steel "Gunfighter mod.3" grip, a modern ergonomic design, each flank of the pistol grip includes fine texturing for perfect wet weather handling. The trigger guard is built into the receiver, improving strength and allowing gloved fingers easier access to the trigger than the standard AR flat trigger guard. The trigger is known by Delta Armory as the CNC Type A Flat trigger, offering a flat serrated front surface with a short finger ledge, ideal for rapid double taps.

At the rear of the receiver, we come to the steel CQD style sling plate, which offers ambidextrous functionality with single-point slings; perfect for left or right-handed shooters. The steel construction of the sling plate practically guarantees no matter what you choose to mount to the plethora of 20mm rails on the Silent Ops 7, the sling plate will be strong enough to support the weight.

To the rear of the sling plate, we come to the M4/AR-15 buffer tube, which is constructed from the same strong high density polymer used for the receiver. The buffer tube offers 6 positions of stock adjustment for the pre-installed Delta Armory battery stock, allowing you to set the stock at the perfect length to suit your body type and loadout. 

Some may recognise this stock from Krytac's Trident range, however, this stock was actually designed by Delta and supplied to Krytac, so what you are seeing here is the original! The Sliding Stock is constructed from high-density polymer throughout, with a steel adjustment pin to eliminate wobble and steel QD sling sockets on either side. The stock is a "club foot" style design with a low profile adjustment lever to reduce the possibility of snagging the stock on your equipment. 

To access the battery compartment, squeeze the two tabs at the toe of the stock together, after which you can lift the butt plate off to find a Mini-Tamiya connector and make use of the stock's built-in battery compartment to house a nunchuck/crane-style battery. For the DA-C05, we recommend a 7.4V 1300mAh LiPo crane/nunchuck battery but you can also make use of a 9.6V 1600mAh NiMH for extra capacity. Two 9.6V 1600mAh NiMh batteries are included in this starter bundle along with a charger. Talk about great value!

On the inside, we are treated to some decent pre-upgraded parts, even in this CHARLIE™ line platform. The gearbox shell is reinforced to cope with stronger springs and the spring guide is a quick change example making power tuning a breeze. Inside the version 2 gearbox, we have an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding. The gearset is constructed from steel with an 18:1 ratio, and the gears themselves run on 7mm bushings for a smoother, unlaboured gearbox report. 

To provide the accuracy needed to deal with long range foes, the DA-C05 is equipped with a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering higher FPS with the same spring and finer HOP-up adjustment increments so you can get your HOP-up set perfectly for your chosen ammo weight. The rotary unit also holds its setting far better than the legacy gear-style HOP-up unit, meaning once your HOP-up is set you won't need to touch it again for quite some time.  

If you are comparing and contrasting the various different M4/AR-15 platforms in this configuration, don't bother, get the Delta! With plenty of pre-upgraded parts, solid high density polymer furniture and a unique stock at the rear, this is the best of the bunch! 

Features

• Complete Beginner Bundle - All you need to get shooting is eye protection
• 6.03mm Tightbore inner barrel - Great accuracy potential 
• 14mm CCW Male threaded outer barrel - Tracer/suppressor ready, barrel extension required
• Flip-up iron sights pre-installed - Mounted to the top rail, press textured buttons to flip up
• 20mm Picatinny quad rail handguard - Compatible with 20mm Picatinny accessories 
• Extended charging handle latch - Easy access to the HOP-up unit for adjustment
• 20mm Picatinny railed receiver - Ready for a red dot sight or rifle scope
• Rotary adjustable HOP-up unit - Easy to adjust in fine increments, holds its setting well long-term 
• Delta Armory/Psionics Berserker HOP-up bucking - Great range with 0.28g BBs
• 6-Position M4/AR-15 buffer tube - Adjust the stock to suit your body type perfectly
• Delta Armory battery stock - Plenty of space for nunchuck batteries, QD sling sockets on each side
• Ambidextrous sling plate - Mount a single-point sling on the left or right side
• Ergonomic pistol grip with reduced grip angle - Great for modern shooting stances, very comfy
• Reinforced version 2 gearbox - 
  • SHS Piston with steel full tooth rack
  • SHS Tappet plate
  • Quick change spring guide
  • Steel 18:1 gearset
  • 7mm Bushings
• Rear wired - Mini-Tamiya connector - Recommended battery: 7.4V 1300mAh LiPo or 9.6V 1600mAh NiMh
• Compatible with M4/AR-15 AEG magazines - Plenty of spares available (3 x 120rnd Mid-caps included)

Package Includes

• Delta Armory DA-C05 CHARLIE™ M4/AR-15 Silent Ops 7 AEG; Patrol Base Starter Bundle [DA-C05-PB]
  • 3 x 120rnd Mid-cap magazines
  • 2 x 9.6v 1600mAh Ni-Mh Batteries
  • Speed Loader w/GBB adapter
  • UK 3-Pin Battery charger
  • 1000 Delta Armory 0.2g BBs
  • Cleaning rod
  • User manual