- IP67 Waterproof
- One-Piece Construction
- Chemical / Fungus Resistant
This is another solid and dependable Hard Case from PARRA, which features a Rubber Seal around the lid for an IP67 Waterproof Rating. The solid One-Piece construction makes for a very robust case, and the structural ribs that provide support for the case also help them stack on top of one another really well. With Chemical, Solvent, Fungus and Impact protection, there's not much that can go wrong with the Thresher ROTA Hard Case.
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
The Thresher ROTA Hard Case is a lightweight yet incredibly tough storage or travel Case from PARRA, who manufacture a wide range of incredibly well-built storage solutions. The Thresher is constructed from a One-Piece slab of Polyethylene armour, which is scratch resistant, and incredibly strong. The design of the Case lends itself to its' ruggedness, with thick corners and structural ribs to add to its' core strength. The Cases are designed so that multiple can be easily stacked together, using the structural ribs to sit comfortably on one another and reduce movement. The material used for the interior protects the contents of the case from most chemicals and solvents, and is also resistant to fungus, which makes it particularly good for medical equipment.
A Rubber Seal sits around the lid of the Case, which provides a Waterproof and Dust Tight seal, which has an IP67 Waterproof Rating. This means it is rated to fully protect against the ingress of Dust, as well as from Water when submerged at 1m for 30 minutes. This makes it ideal for camping and other outdoor activities, if you need to ensure that your kit stays safe and dry.
Seven Alloy Rotating Clasps can be found on the outside of the Case, recessed into the walls, which helps prevent accidental damage and also helps keep the low profile nature. One of these clasps has a solid loop that can have a padlock inserted through it to secure the case, and keep prying eyes away. This makes it great for Airline Travel, as a TSA approved lock can be used, preventing them from cutting your Padlock (as they will with no hesitation) should they decide your case needs inspecting. The Lid is secured by two very solid Alloy hinges, and has a Cable Retainer to stop the Lid folding beyond the hinges. Two Folding Grab Handles can be found on either side of the Case to assist in carrying it. The front of the Case has a metal frame in which you could slide a piece of laminate with contact details or info about the contents of the case, to help you better organise your kit.
If you need a solid and dependable Hard Case that is more than happy to navigate the TSA, as well as keeping your contents protected from Chemicals, Solvents, Fungus, Impacts, Water, Dust and more, then the Thresher ROTA Hard Case was just what you were looking for.
Features
- Extremely Tough Storage Solution
- One Piece Construction
- Lightweight Polyethylene
- 7 x Rotating Locking Clasps
- Secure Padlock Loop
- Thick Corners and Structural Ribs
- Excellent Load Bearing Properties
- IP67 Waterproof Rating
- Dustproof Design
- Rubber O-Ring Lid Seal
- Dent and Fracture Resistant
- Resistant to Most Chemicals & Solvents
- Fungus-Resistant Material
- Recessed Clasps
- Dual Folding Grab Handles
- Multiple Cases Can Be Stacked Together
- Eggbox Foam Insert in Lid
Package Includes
- No. 4990 Thresher ROTA Hard Case
Specification
General
|
Olive Green
|
---|---|
|
Polyethylene
|
Product Length
|
Approx. 58cm
|
Product Width
|
Approx. 41cm
|
Product Height
|
Approx. 34.8cm
|
Case Related
General
Case Size
|
Medium
|
---|---|
|
|
Case Features
Ratings
|
IP67
|
---|
Protection
|
Waterproof
|
---|---|
|
Yes
|
|
Yes
|
|
Yes
|
Padding
|
Yes
|
---|---|
|
Soft Foam
|
|
Eggbox Foam Lid Insert
|
Latches
|
Rotating Clasps
|
---|---|
|
7
|
Handles
|
Yes
|
---|---|
|
Small Folding Grab Handles x 2
|
Wheels
|
No
|
---|
Security
|
Padlock Holes
|
---|
Dimensions & Weight
Weight
|
Approx. 7.2kg
|
---|
External
|
Approx.58cm
|
---|---|
|
Approx.41cm
|
|
Approx.34.8cm
|
Internal
|
Approx.3.3mm
|
---|
Base
|
Approx.28.1cm
|
---|---|
|
Approx.48.6cm
|
|
Approx.33.6cm
|
|
Approx.49.1cm
|
|
Approx.31.9cm
|
Lid
|
Approx.4.95cm
|
---|---|
|
Approx.51.1cm
|
|
Approx.33.7cm
|
|
Approx.51.1cm
|
|
Approx.33.7cm
|