NUPROL

A MOLLE compatible double AR36 magazine pouch, designed to be attached to tactical equipment like rigs and vests, and is suitable for both AEG and GBBR AR36 Airsoft magazines. 

A MOLLE compatible double AR36 magazine pouch, designed to be attached to tactical equipment like rigs and vests, and is suitable for both AEG and GBBR AR36 Airsoft magazines. 

A MOLLE compatible double AR36 magazine pouch, designed to be attached to tactical equipment like rigs and vests, and is suitable for both AEG and GBBR AR36 Airsoft magazines. 

A MOLLE mounted utility pouch which has more pockets and internal pouches than you can shake a stick at.

Nuprol are back with a fresh mag design. This magazine holds 380 rounds and is designed for the M4/AR15 AEG but should work in most compatible STANAG platforms and has an ultra-modern look thanks to its ridged and stippled texture pattern. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.

Either side of the magazine has ridged extrusions  to provide extra grip when pulling the magazine from a pouch and the stippled texture only adds to the grippage. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!

An absolutely massive 11.1v 2000mAh Li-Ion battery in a stick configuration, which allows you to squeeze as much lifespan out of your Airsoft Electric Gun as possible, by offering a lower cost and higher power density vs. LiPo batteries.

NUPROL's latest offering into the Airsoft Market with newly designed 0.25g green/red illuminated tracer BBs, made to be more consistent and have better accuracy that ever before. 

For those of you with some serious power requirements. This large LiPo battery is designed for crane stock use but may also be suitable for larger Airsoft hand guards too. This variant of the battery is fitted with a Deans connector.

An extremely lightweight and low profile back and shoulders panel of MOLLE, which affords the user maximum manoeuvrability, comfort and connects to a belt system/MOLLE via simple fabric loops.

Are you evil? Do you not think 3/6 shots per trigger pull is enough firepower? In that case, allow us to introduce you to the NUPROL 1200rnd Electric Drum Magazine for Tri-shot Airsoft shotguns, a device that will not make you any friends at a CQB skirmish, thats for sure! This drum magazine is constructed from high density polymer with a modern look, matching well with modern tactical pump action Airsoft shotguns and transforming any shotgun it is mounted to into an intimidating CQB dominator, both in looks and in function! This magazine is an autowinding design with a sound control mode, which requires 3x AAA batteries to operate. 

A tough little TSA-compatible lock designed specifically for the NUPROL series of hard cases, but will work with most suitcases and containers thanks to the thin gauge cable.

A folding fore grip lovingly designed by NUPROL which fits onto 20mm RIS / RAS Rails to provide another manipulation point on a weapon which can be folded away when not in use.

A RIS compatible mount for your 'Action Camera', which allows you to mount a wide range of compact cameras to your replica, helmet, or anywhere with a 20mm RIS rail.

Be safe while charging your Airsoft batteries! If it goes wrong, it really goes wrong. The NUPROL LiPo Safe Charging Bag - 2.7L is designed to store LiPo batteries and other Lithium batteries plus their charger during the charging process, reducing the chances of damage in the event of a LiPo / Battery fire. Better to be safe than sorry!

This charging bag is the perfect size to hold a charger and a battery when charging or to store all your spare batteries when they're not in use. It features a zip-up fastening mechanism for the ultimate safe storage.

An Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries.

A retention holster designed to fit snugly WE Europe Big Bird Series Series Airsoft Pistols and can be attached to the users belt. 

NUPROL's latest offering into the Airsoft Market with newly designed 0.20g green and red illuminated tracer BBs, made to be more consistent and have better accuracy that ever before. 

A magazine pouch for Airsoft pistol magazines, which can be attached to MOLLE Compatible rigs, vests and backpacks.

We put this pack together to serve those who run a tracer-equipped pistol in CQB and want to get all their consumables in one go, with a tasty discount as a bonus! 

A LiPo saddle battery designed to fit in handguards in replacement of the traditional 1600mAh NiMH blocks/saddles (G36 handguards etc).

If you are looking for tracer BBs in a heavier weight for use with sniper rifles and upgraded setups NUPROL have what you need! The RZR 0.30g Green Tracer BIO BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are green tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in a low light outdoors setting. These BBs are also biodegradable which is great news for those of us who skirmish at sites which mandate bio BBs!

Folding dump pouch which is designed to hold used or empty magazines to prevent the user from accidently loading an empty during an engagement or fire fight. 

This is a replacement Pressure Pad and Tail Cap Assembly for NUPROL NX600 series Torches. If your Pressure Pad is no longer working, it could prove to be difficult and ineffective to repair it, and will simply be easier to replace the entire assembly. It comes supplied with 2 x adhesive Velcro strips for placing the Pressure Pad on your gun.

If you have a summer of skirmishing planned, this pack should help keep you honest when the weather gets spicy! The GBB Summer Sidearm Pack combines NUPROL Biodegradable BBs and NUPROL 1.0 Summer Gas so you can keep your GBB pistol within skirmishable power limits and prevent excessive wear and tear when things heat up and gas pressure rises. 

Be safe while charging your Airsoft batteries! If it goes wrong, it really goes wrong. The NUPROL LiPo Safe Charging Bag - 3.8L is designed to store LiPo batteries and other Lithium batteries plus their charger during the charging process, reducing the chances of damage in the event of a LiPo / Battery fire. Better to be safe than sorry!

This charging bag is the perfect size to hold a charger and a battery when charging or to store all your spare batteries when they're not in use.

An Alloy constructed sunshade for 26, 32, 40 and 50mm riflescopes, which will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

An Alloy constructed sunshade for 26, 32, 40 and 50mm riflescopes, which will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

A combination scope and side rail 20mm RIS rail mount designed to fit on both Airsoft Electric and Gas type AK Platform weapons which feature a side mount plate. 

An 11.1v 2000mAh Li-Ion battery for Airsoft Electric Guns, which comes supplied in a Crane/Butterfly/Saddle configuration, meaning two rows of cells. This makes them very easy to place in awkard-to-fit spots such as Handguards and Crane Stocks, and will provide better Power Density that traditional LiPo batteries.

This Magazine is designed for M4 / M16 / AR platform Airsoft Electric Guns, and holds a total of 130rnds. Being a Mid-Cap Magazine it will feed until empty and doesn't have the rattle of High Capacity Magazines, but needs a Speedloader to be filled. It has textured externals to improve grip, as well as faux capacity counters for extra realism.