NUPROL

Suitable not only for Airsoft but for RC vehicles and toys too, this  7.4v 2200mAh LiPo Stick Battery will fit in tight areas like stock tubes and handguards where other batteries wouldn't normally.

An electric powered M4 based Airsoft replica, which is constructed mainly from Polymer to offer a lightweight and maneuverable platform which packs a punch.

A pack of Shotgun Shells designed for Airsoft 6mm Pump Action Shotguns which accept Standard Shotgun Shells. 

The shells are easily loaded from the top, by using an Airsoft Speed Loader, by simply pushing the nozzle into the Shell's top hole and filling. These shells are a must have purchase for any Airsoft Skirmisher who has a pump action Shotgun, as it allows you to play for longer without having to stop to reload magazines.

If you are loading up on magazines for your M4/AR15 AEG then you will want to check out the Q-Mag from NUPROL. This attractive-looking polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool. This magazine is designed with a crackle texture on the exterior which is useful for drawing the magazine from pouches, but also allows the mag to be used as an improvised grip to help you get the best shooting position when things get tight. This magazine is compatible with most Airsoft M4/AR15 AEGs, and is a spring loaded mid-cap, which means no battle rattle to give you away!

An Airsoft M4 6mm BB Gun High Capacity Magazine with a twist, instead of using a bottom winding wheel, a pull cord is built into the magazine which can be pulled to quickly prime the magazine.

NUPROL - 8.4v 1600mAh Ni-Mh Small Block Battery is an Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries. 

Built by NUPROL as part of their Power range this is a high quality charger designed to charge LiPo, NiMh, LiFe, LiHv, LiLo, NiCd and PB batteries, all of the most common types of battery used in Airsoft replicas.

A Nylon constructed and elasticated set of suspenders which can be put to a wide range of uses, but mainly holding the weight of your trousers or a battle belt evenly across your shoulders.

A Nylon constructed and elasticated set of suspenders which can be put to a wide range of uses, but mainly holding the weight of your trousers or a battle belt evenly across your shoulders.

If you are looking for heavy-weight biodegradable BBs, NUPROL's RZR BBs would be a great choice! RZRs have a superb reputation for precision and tight tolerances and this version is made from a biodegradable material which means you can shoot as much as you want without worrying about cleanup afterwards. 

Only with AKs can get you can get a mag like this, so AK fanboys count yourself lucky. Styled after the Russian design of the AK quad stack magazine, this AEG flash magazine holds a whopping 1000 rounds so you can stay on the field without changing mags for a crazy amount of time.

With a textured front and back for easy mag grippage, the magazine is reloaded using the top fill window and being a flash mag, it is wound (reloaded) at the bottom using the pull cord.

So if you're a fan of AKs and hate reloading, this chunky boy is for you!

If you like to shoot a lot with minimum downtime winding or reloading a flash mag is just what you need! This magazine is styled after the 5.45x39 AK74 magazine and is a flash mag, meaning it functions similarly to a high-cap but instead of the usual winding wheel we have a pull cord beneath a hinged baseplate which allows you to wind the magazine far faster than a conventional winding wheel.

The magazine can be filled through the fill window at the top of the mag body as usual, and with it filled up you can pull the baseplate open from the front of the mag and access the winding cord inside. A few pulls of the cord should tension the magazine so you can get shooting with a massive 500rnd capacity at your disposal. If you like maximum shooting and minimum winding and reloading, this is the mag for you!

An 11.1v 1200mAh 20c LiPo Battery in a Slim Stick configuration, complete with a Deans Connector. It has total dimension of: 1.35cm x 1.62cm x 18.5cm and is perfect for up-rated guns and rifles with a high power draw such as DMRs and high rate of fire setups, and other replicas that require a Stick Battery down the Receiver, such as AK/UMP models.

Nuprol are back with a fresh mag design. This magazine holds 380 rounds and is designed for the M4/AR15 AEG but should work in most compatible STANAG platforms and has an ultra-modern look thanks to its ridged and stippled texture pattern. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.

Either side of the magazine has ridged extrusions  to provide extra grip when pulling the magazine from a pouch and the stippled texture only adds to the grippage. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

An ultra-thin and lightweight battery, perfect for squeezing into even the tightest spots. The battery provides 1200mAh of power with a discharge rate of 20c. The battery is so thin it can fit into stock tubes and AK/MP5 AEG Battery compartments.

Suitable not only for Airsoft but for RC vehicles and toys too, this  7.4v 2200mAh LiPo Stick Battery will fit in tight areas like stock tubes and handguards where other batteries would normally not.

A proper multi-gun carrier system that has a padded exterior walling and a padded gun divider. The must-have rifle bag for those who own a fair bit of kit.

A proper multi-gun carrier system that has a padded exterior walling and a padded gun divider. The must-have rifle bag for those who own a fair bit of kit.

A proper multi-gun carrier system that has a padded exterior walling and a padded gun divider. The must-have rifle bag for those who own a fair bit of kit.

A proper multi-gun carrier system that has a padded exterior walling and a padded gun divider. The must-have rifle bag for those who own a fair bit of kit.

The G-Series Carbine Kit is a Polymer extension for the forend of an Airsoft G-Series pistol that gives the user 2 x RIS Rails to add accessories, and the ability to carry an extra magazine in ready position for a quick reload.

If you are looking for tracer BBs in heavier weights to maximise your effective range, NUPROL have what you need! The RZR 0.28g Precision Tracer BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings. 

A high quality 11.1V LiPo battery with a 1200mAh capacity, suitable for both Airsoft and RC use.

A Double Magazine Retention Pouch designed for WE Europe Airsoft Pistol Standard Sized Magazines. The holsters are constructed from Durable Polymer and are designed to allow the user to gain access to their Magazine and draw them as quick as possible. 

A medium capacity spring fed magazine that replicates a real world mag that's incredibly popular with civilian shooters. The magazine has a tough high quality Polymer exterior that feels great in the hand thanks to the unique hex cut out design, and the ridges that run up the length of the front and back of the magazine.

Holding 140rnd , the mag is a mid-cap type, meaning there is no rattle in comparison with hi-cap magazines and is filled using a speed loader at the top. If you need a high quality magazine that meets your demands, want a unique design to finish off that modern-era rifle or simply want to carry more ammunition in the field without annoying rattle sounds - you can count on these magazines.

An 11.1v 1300mAh 20c LiPo Battery in a PEQ Box configuration, which makes it perfect for hiding inside a PEQ Box. It has a 9cm cable with a Deans Connector on the end, and total dimensions of: 1.65cm x 4.15cm x 6.6cm.

Shower your enemies in a cloud of white plastic. Shock and awe is the name of the game with these custom load grenades. Simply fill your grenades with BBs, paintballs, talcum powder or anything else that's sensible to fire through a launcher (check with your site first to avoid disappointment), insert it in a compatible grenade launcher and fire away!

Looking for a fast winding high-capacity AK magazine? The NUPROL 500rnd High-Cap Magazine is designed to work with AK47/74 AEG rifles but is a 7.62x39mm style magazine with a significant curve, making it ideal for AK47s and AKM rifles. The mag is a flash magazine high-cap and can be filled through the fill window at the top of the magazine body and is tensioned via the winding cord which is hidden beneath the hinged baseplate and can be accessed by pulling the baseplate down from the front.

This mag holds an impressive 500 BBs, meaning in most cases you will not need to reload in an entire battle round unless you are particularly heavy on the trigger! The magazine is constructed from stamped steel with the classic AK reinforcing ribs stamped into each side, making it great for old-school AK setups and OPFOR loadouts.