New Airsoft Guns & Products

If you're looking for a unique QD red dot sight, look no further! The PCS Red/Green Multi-Reticle QD Sight for 20mm Picatinny Rail is a great choice for your Airsoft rifle; it offers a red or green dot with four different reticles for each. It is powered by an LR41 battery that can be inserted into the right-hand side of the scope.

Your choice of reticle can be selected via the dial on the rear of the sight, offering a simple dot, ringed dot, cross or ringed cross reticle, perfect for any environment or preference. With an integral QD mount, all the reticle options one could ever need along with full adjustment when it comes to zero, reticle colour and brightness, the PCS Red/Green Multi-Reticle QD Sight for 20mm Picatinny Rail is an impressive bit of kit for an equally impressive price!

Have you been planning on running a MOSCART launcher in your next skirmish? There's no easier way to stock up than with the Acetech AceHive MOSCART Grenade Set w/ SPAWNER Speed Loader! This pack comes as a choice of either two or six AceHive MOSCART Grenades with a SPAWNER Speed Loader for ease of loading.

There is no feeling quite like releasing 80 BBs in the blink of an eye; people will certainly know not to mess with you again! The MOSCART fires by striking the steel knocker valve, once struck, it releases a devastating shotgun-style blast of BBs, destroying anyone who is unlucky enough to be stood in front of it.

The speed loader is a super unique and fresh design, allowing you to fill all MOSCART loading tubes in seconds with a simple button press and twist. You can load 7 MOSCART shells before needing to refill the speedloader, allowing you to have plenty of fun before the time comes to replenish your BBs.

The sneaky counterpart to the Bolster Tuned CM.041 upgraded SMG-5 AEGs has returned and it's better than ever! Enter the CM.041 SD5 SMG-5 Upgraded Edition; a full metal SMG-5 SD5 replica built by the same team behind the ultra-high-end Bolster Armouries AEG series and previous Bolster Tuned AEGs.

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD is to tear it to pieces and build it back up to fulfil its true potential. This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Maple Leaf Macaron HOP-up Bucking and Nub was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the Bolster Tuned CM.041 SD5 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 SD to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. 

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041 SD! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you're after affordable heavy-weight BBs, Specna Arms ONE 0.30g 6mm BIO BBs are a fantastic option. Supplied in a resealable bag containing 1000 BBs approximately, these BBs are made from biodegradable materials, making them great for outdoor target shooting and skirmishing alike. 

These slightly heavier than standard BBs provide improved foliage penetration ability and wind resistance along with extended range in guns with upgraded HOP-ups. If you're trying to feed an ammo-hungry LMG without emptying your wallet, Specna Arms ONE 0.30g 6mm BIO BBs are a great way to do it!

If you want to add some tactical trimmings to your AK an extended fire selector would be a good call. The LCT AK Fire Selector is constructed from stamped steel and is a modernised design with a ledge that can be used to select fire modes from a firing grip. With this selector installed you no longer need to take your hand off the pistol grip to select your fire mode; simply move the new selector using the ledge and your trigger finger.

This makes a massive difference when it comes to handling an AK and allows it to go toe to toe with the AR platform in ergonomics and efficiency. It doesn't come with any fittings and is only the fire selector. A perfect item for any Tactical AK or custom AK build, this selector lever not only looks super slick but also makes your AK super slick to use. Not to mention, it will give the iconic fire selector scratch mark on your receiver!

Please note this is only the selector and does not include the necessary fittings for installation.

If you're working on an SBR build with a Sandman suppressor, the PTS Syndicate Dead Air KeyMicro Flash Hider is the perfect finishing touch! This steel flash hider replicates the real Dead Air KeyMicro Flash Hider, the shortened variant of the full-size KeyMo Flash hider. Like its longer relative, the KeyMicro Flash Hider is compatible with PTS Dead Air Sandman QD suppressors and mounts to 14mm CCW male threads but its squat, aggressive styling makes it very well suited to modern SBR builds.

Whether you're running a PTS Sandman suppressor or not, this uniquely styled tri-prong flash hider will give your build an elite yet discrete front-end accent with the pre-requisite top-tier PTS Syndicate build quality and official licencing from Dead Air Silencers!

If you're running a compact platform with a PTS Dead Air Sandman suppressor, your build is begging for the PTS Syndicate Dead Air KeyMicro Brake! This muzzle brake is constructed from steel and compatible with 14mm CCW male barrel threads, offering a uniquely aggressive shortened design with KeyMo suppressor compatibility. This means you can mount PTS Dead Air Sandman-S, Sandman or Sandman-K suppressors quickly and easily, along with any as-yet unreleased KeyMo interface suppressors from PTS.

Being licenced by Dead Air Silencers means the KeyMicro is as close to the real thing as you can get, with flawless machining throughout and a unique, modern design. Whether you're running a Sandman suppressor or not, the Dead Air KeyMicro Brake from PTS Syndicate is the perfect finishing touch to any SBR build!

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. It is constructed from polymer with a rubberised butt plate. The stock features a rear battery compartment which is accessible when the butt plate is removed which allows the fitting of a Nunchuck configuration battery, such as this.

The stock features rear loopholes for two-point sling setups, as well as a rubberised butt plate for enhanced hold when shouldering your weapon. To fit the stock the pin which is below the adjustment handle should be pulled fully out, then the stock will simply slide onto the buffer tube, this can be done either by Hand or with a pair of Pliers. The stock is a great replacement part for M4 Airsoft rifle project builds or simply as a replacement for an already damaged part.

If you need to mount an optic on your VZ.58, this is essential! The Ares Side Rail Mount for VZ.58 AEG is compatible with the Ares and Delta Armory VZ.58 AEGs and allows a VZ.58 scope mount to be fitted. The set includes the side rail itself and the mounting bolts. Please note, this side rail is only compatible with Ares VZ.58 scope mounts and is NOT compatible with AK or SVD mounts. 

If you're in search of a beastly muzzle brake to finish off your build, the PTS Syndicate Dead Air KeyMo Muzzle Brake is a fantastic choice. Offering official licencing from Dead Air Silencers and steel construction, this muzzle brake adds an aggressive edge to whatever platform it is mounted on, along with compatibility with the PTS Dead Air Sandman series of QD suppressors.

Designed to mount to any 14mm CCW male threaded outer barrel, the KeyMo Muzzle Brake is what you need if you're running a PTS Dead Air KeyMo suppressor and prefer the mean looks of a muzzle brake over the tri-prong flash hider supplied with the Sandman series!

The G&G Armament Knights Armament 3 Prong Flash Hider matches the design of real steel flash hiders. It is constructed from steel making it extremely durable and sure to withstand any skirmish. It mounts to 14mm CCW threading, commonly found on most Airsoft assault rifles. To attach it, simply twist it onto your rifle's outer barrel and then you're good to go! It features a very aggressive design that will make any platform ten times more aggressive.

This flash hider also has the added realism of being licensed by Knights Armaments, the real steel firearm company. Although there are no visible trademarks on the flash hider itself, it gives you peace of mind knowing that this muzzle device has been made to the standards of a real steel manufacturer.

If you want a super realistic flash hider for your Airsoft platform, this is the one for you! Its steel construction and real steel design certify that this flash hider is perfect for any skirmisher seeking a realistic loadout.

If you've recently purchased yourself an Acetech AceHive grenade, you need this speedloader! The Acetech SPAWNER Speed Loader holds a whopping 560BBs, allowing you to load a grand total of 7 grenades before you need to refill this speedloader. It is only compatible with the Acetech AceHive grenades and cannot be used to refill any other MOSCART, that would make a mess!

It is constructed from durable polymer and has an ergonomic design so you can easily grip it. To use it, untwist the cap by rotating it anti-clockwise, pour in your BBs, and then reseal the cap. After that, insert your AceHive grenade into the bottom of the speedloader and ensure it is properly aligned. Then, press and hold the orange button, grip the top of the speedloader with your other hand, and twist the lower half of the speedloader clockwise.

This will fill your AceHive grenade in a matter of seconds, making it ready for the battlefield. Just make sure you don't use the filling mechanism whilst there is no grenade inserted into the speed loader, otherwise you will have a mess consisting of 560 BBs!

If your MPX handguard is looking worse for wear, the SigAir M-LOK Handguard for MPX AEG is the fresh replacement you need! This is an original replacement part for the SigAir/VFC MPX AEG, the standard-length handguard which comes with the original SMG, constructed from CNC machined aluminium with a flawless finish.

M-LOK slots are present at the 3, 6, and 9 o'clock positions along with a short section of 20mm Picatinny rail up top, ready for your choice of accessories. Compatibility-wise, this part is specifically for the SigAir/VFC MPX AEG and probably won't work with other brands. If your beautiful MPX handguard has gained some battle wear and you want to restore it, this handguard will do the trick!

If you're running an SMG-5, M4/AR-15 or any other AEG which uses a version 2 gearbox, the GATE ASTER™ MOSFET will take your AEG to the next level. This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App.

This set also includes the Gate QUANTUM CNC trigger which is compatible with M4/AR-15 AEGs but unfortunately won't work with SMG-5 or G3 platforms. When installed, the Quantum trigger offers 250 trigger sensitivity options via the ASTER's optical sensors. Constructed from CNC-machined aluminium, the Quantum both looks great and allows the ASTER™ to take full advantage of its optical trigger sensors.

This MOSFET is a great choice due to its fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™ so if you're not confident, we suggest seeking a technician to carry out the installation process for you. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™

If you need a replacement for your G&G MOSFET or want the latest version with its more compact design, the G&G Armament ETU/MOSFET for G2 Gearbox; Rear Wired is ideal. This set is pre-wired for relatively easy installation and is the latest G&G MOSFET 4.0 with its more compact form, saving you space in your battery compartment.

Installing this set gives your AEG the option of programming 3-round burst instead of full auto, great for those who keep running out of ammo due to a heavy trigger finger! Other features include low-voltage cutoff and cycle completion, ensuring both your gearbox and battery are kept healthy in the long term. Worth noting is that this set will require 11.1V LiPos to be used and if you're installing this in a non-G&G G2 AEG you will need to carry out modifications to ensure your setup does not pre-engage (AOE correction at the least).

Do you want to become a skirmish menace? There's no better way than with the Acetech AceHive Grenade! This compact area denial tool is compatible with 40mm MOSCART launchers, so you can give a nasty surprise to any skirmisher who enters your personal space. It holds 80 BBs, 10 in each tube. The clear polymer design allows you to keep an eye on your BBs so you can make sure this grenade is fully loaded to unleash the full wrath of this Grenade!

This grenade can be loaded using a speed loader but it works best with the Acetech SPAWNER Speed Loader. The brass gas fill valve is located on the front/top of the shell. When filling this grenade we advise that you wear eye protection throughout the process and fill the gas before filling the BBs.

Once loaded with BBs, press down on the polymer star-shaped protrusion at the top of the grenade until it clicks. This pushes down a rubber O-ring that keeps your BBs secure so they don't just roll out. The grenade is now primed and ready. Once the steel knocker valve is pressed, it will unleash a massive shotgun-like spread of 80 BBs, lots of fun for the user and terrifying for the unfortunate opponent!

If you want some awesome realistic-looking mags and you're running a CGS or TM MWS system GBBR, fill your rig with these! The EMG 30rnd Magazine for CGS & MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui MWS system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the bottom of the polymer Lancer Systems L5 AWM Magazine style body.

This mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM MWS and CYMA CGS GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs.

If you're planning to run your Tokyo Marui Hi-Capa GBB on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; TM Hi-Capa GBB will improve your firepower considerably!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. Allowing standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your 'Capa!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your Tokyo Marui Hi-Capa GBB on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; TM Hi-Capa GBB will improve your firepower considerably!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. Allowing standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your 'Capa!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you plan to run your Tokyo Marui Hi-Capa GBB on HPA, the Army Armament HPA Adapter for M4/AR-15 AEG Magazines; GBB Hi-Capa will considerably improve your firepower!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. It allows standard M4/AR-15 AEG mags to be used along with a High-Pressure Air (HPA) power source, so you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your Capa!

The set includes an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will take your gameplay to the next level!

If you're in search of an affordable alternative to the RunCam 4K so you can film your hits in-game, the RunCam Scope Camera SE has your name on it! A similar concept to the original RunCam, the SE model mounts to your platform via a standard 30mm scope ring for 20mm rails, giving you ultimate flexibility in how you configure your primary.

Able to record at 1080P resolution at either 30 or 60 fps (frames per second), the Scope Cam SE can handle SD cards up to 512GB capacity, though RunCam recommends a card of at least U3 write speed. The set includes a USB type C cable for both charging the included 18650 battery and transferring data along with what is known as the "Flashback Cable", a rat tail style pressure switch designed to record 15-second segments of footage with a quick tap. Like the RunCam 4K, the SE can even record the 5-15 seconds before you press the switch, just like a police body cam!

The Scope Cam SE also offers real-time footage previews via Wifi, connecting to the RunCam app on any mobile device or tablet. If you're already rocking a helmet camera and want to get some clear footage of your kills downrange with the iconic hit marker, the RunCam Scope Cam SE is the way to go!

If you're seeking that laser beam tracer lifestyle but primarily run a shotgun, the Acetech Quark C Shotgun Tracer Unit is what you need! This aggressively styled tracer unit mimics real steel shotgun breaching chokes and provides muzzle flash and tracer functionality to any Airsoft shotgun with an outer barrel with a 23mm or 23.5mm outer diameter, specifically Golden Eagle and Tokyo Marui platforms.

The tracer mounts via a grub screw on the collar using friction, we recommend ensuring the screw is properly tight and the unit is mounted straight before testing it out. The activation buttons are located underneath the rear collar, as is the USB Type-C charger port for the integral rechargeable battery, requiring the rear collar to be unscrewed to access. The button cycles between the available modes: tracer with muzzle flash, tracer only and muzzle flash only, ideal for those who want all the fire but none of the tracer and those who want tracer functions without lighting up the room and giving their location away. 

 If you grace CQB sites with a trusty shotgun at your side, the Acetech Quark C Shotgun Tracer Unit is a must! Blast some funky bright-coloured BBs and know exactly when you've bested your foes!

Those looking for a lightweight backup weapon with a fully-fledged special forces style look you can't do much better than the ST46 from S&T. This AEG is designed to look similar to a popular real-world platform and the PDW style stock makes it very compact and optimal for close-quarters battles.

The ST46 is constructed from both alloy and polymer, making it a great choice for those with less physical strength or those who are a bit clumsy and may bump, scrape or drop their AEG. A high-density polymer receiver may be less realistic, but it will not show scuff marks as readily as an alloy receiver might thanks to its dyed nature allowing it to maintain its looks far better than a painted or anodised finish.

On the inside the ST46 has an alloy version 2 gearbox with a Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. Its MOSFET protects the internals from any electrical damage and also improves the trigger response. If you need a lightweight solution, either as a primary or a backup, the S&T ST46 Sports Line PDW M4/AR-15 AEG is the perfect rifle for you!

The DIPLOMAT: a person who can deal with others in a sensitive and tactful way. Well, we can assure you that there is nothing sensitive about this AEG, but it is certainly tactful! Tactful in the sense that it shows skill when dealing with others or difficult issues... on the battlefield. This short and snappy rifle is loud, proud and better than the rest of the crowd.

It features a pre-installed KX-3 Firepig flash suppressor, a detailed replica of the Noveske NSR-7.5 M-LOK handguard and Noveske Gen.3 upper receiver and plenty of pre-upgraded internal. A CYMA Platinum E-Edition gearbox, complete with a pre-installed Kestrel ETU, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades.

Externally, things are par for the course for EMG, with a flawless build with all the authentic details and perfectly replicated Noveske trademarks, available in black, tan or Noveske's unique "Bazooka Green". If you're looking for a short-barrelled AR platform with pre-upgraded internals focused on speed and a flawlessly realistic build, the Gen.3 DIPLOMAT will do the trick!

If you're a fan of the real steel firearm scene and love tactical platforms, you must be well aware of the Noveske N4! This Airsoft replica boasts full metal construction and a plethora of pre-upgraded parts from CYMA Platinum, the N4 hits the enemy team where it hurts, with an astonishing trigger response and rate of fire thanks to its E-Edition high-speed internals and MOSFET combination.

To get your rounds out there accurately and consistently, a 6.03mm tightbore inner barrel is installed, coupled with an alloy rotary HOP-up unit for impressive long-range performance, especially for such a compact platform. This 10.5" rifle, is the perfect length for any Airsoft scenario with a performance that can challenge anything else on the skirmish site.

Being an EMG-licenced replica, the N4 Shorty is adorned with flawlessly engraved and laser-engraved Noveske trademarks, making it genuinely hard to tell apart from the real thing. If you want one of the most realistic-looking platforms available on the market, you don't want to miss the EMG Noveske N4 10.5" Gen.3 Shorty .300 BLK AEG Rifle; Kestrel Basic ETU!

If you are into WW2 reenactment or a Japanese history buff, then S&T has just the thing for you! The S&T Type 38 Bolt-Action Airsoft Rifle Replica; Real Wood is a near-immaculate replica of the original Type 38 Rifle Carbine that the Japanese used during WW2. The Carbine variant was intended for use by cavalry, engineers and other roles where a full-sized rifle would be a hindrance. It is made from real wood giving it that authentic feel and weight.

S&T's Type 38 replica follows a similar format to the real steel rifle, boasting a beautiful antique finish on its metal components and stunning real wood furniture to make a rifle that belongs in a glass cabinet when it's not out on the skirmish field. If you need a wall hanger, or you're going for a unique look on the battlefield, there is no better way to stand out than with the S&T Type 38 Bolt-Action Airsoft Rifle Replica; Real Wood!

If you like compact sidearms with an elite look, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight is one to watch. This full metal Hi-Capa platform marries the 3.8-inch barrel length of the most compact Hi-Capa pistols with the full-sized 5.1 frame, giving you the design philosophy of the Glock 19X in Hi-Capa form.

Like other Hi-Capas in the VORSK CS range, the Hi-Capa Vengeance Compact boasts full metal construction, a 6.03mm tightbore inner barrel to enhance accuracy and a threaded outer barrel with a 14mm thread adapter so you can mount a tracer right away. This, the "BDS" version is also equipped with a red dot sight, pre-installed on a fixed position mount for fast target acquisition and even faster follow-up shots when compared to pistols equipped with a slide-mounted red dot sight.

If owning a customised Hi-Capa is on your list, the VORSK Hi-Capa Vengeance Compact w/Red Dot Sight has done all the work for you! With the high-end aesthetic on the outside and a 6.03mm tightbore barrel on the inside, the Vengeance Compact with red dot sight is ready to rock either as a sidearm or a CQB primary!

If you're looking for a motor upgrade for your M4, G3, P90 or SMG-5, the G&G Long Shaft IFRIT 25K Orange Motor is a fantastic choice. This motor boasts a super speedy 25,000 RPM cyclic rate, providing an improved rate of fire and trigger response compared to most pre-installed motors. The set includes an O-type pinion gear and pinion spring, both of which are pre-installed.

Compatibility-wise, this motor is designed for M4/AR-15, P90, G3, SMG-5 (not the K version) AEGs and other AEGs which use long shaft motors. IFRIT Motors have a great reputation for speed and response rate, featuring inside G&G's ARP series and SSG-1. If you want improved rate of fire and trigger response, the G&G Armament Long Shaft IFRIT 25K Orange Motor will give you just that!