All Electric Parts

Springs are the perfect upgrade for an instant FPS boost! They fit in most standard AEGs and have a relatively simple installation process. Many rifles these days have some sort of quick-change spring system which makes your life even easier when upgrading your rifles.

The Bolster Armouries Premium AEG Spring is the best of the best when it comes to internal springs. These are the same springs used in our Bolster Armouries rifles, that's just how premium these springs are! If you want your rifle shooting like a Bolster Armouries ONYX, then the Bolster Armouries Premium AEG Spring is certainly a step in the right direction!

Springs are the perfect upgrade for an instant FPS boost! They fit in most standard AEGs and have a relatively simple installation process. Many rifles these days have some sort of quick-change spring system which makes your life even easier when upgrading your rifles.

The Bolster Armouries Premium AEG Spring is the best of the best when it comes to internal springs. These are the same springs used in our Bolster Armouries rifles, that's just how premium these springs are! If you want your rifle shooting like a Bolster Armouries ONYX, then the Bolster Armouries Premium AEG Spring is certainly a step in the right direction!

If you're the techy type and want to maximise your AEG's efficiency, the Bolster Armouries HOP-up to Barrel O-Ring Shim Set belongs in your toolbox! This set includes 10 o-rings designed to fit around the HOP-up unit and inner barrel, forcing it back to meet the gearbox as seamlessly as possible to promote maximum efficiency and reduce shot-to-shot FPS deviation. 

This set is designed to replace the "one size fits all" HOP-up unit spring, providing a user-customisable solution to account for manufacturing tolerances. While this will take a bit of trial and error to get the perfect fit for your AEG it should prevent airseal qualities from reducing over time and avoid that annoying realisation that you forgot to reinstall the HOP-up spring after upgrading or maintenance! 

The Bolster Armouries HOP-up to Barrel O-Ring Shim set should fit almost every AEG on the market and you probably won't need to use the full set, meaning you might even be able to replace two HOP-up springs with a single set. 

The G&G Armament G2 21.20MM Aluminium Nozzle For AEG is an excellent replacement piece for your Airsoft AEG. It is constructed from aluminium which improves performance and consistency, plus, it is durable and has a longer lifespan compared to polymer nozzles.

If you're building a gearbox from scratch or have some repairs to carry out, the G&G Armament G2 21.20MM Aluminium Nozzle For AEG is a handy spare to have around just in case. Compatibility-wise, this nozzle is designed for version 2 gearbox-equipped M4/AR-15 AEGs and has an overall length of 21.20mm.

If you've had a cut-off lever failure or you like to keep parts on hand just in case the worst happens, the G&G Armament Cut Off Lever For V2 Gearbox is perfect. This is a replacement original part constructed from alloy, compatible with most version 2 gearboxes on the market.

The cut-off lever is a piece that sits between your trigger and sector gear and serves to interrupt or disconnect the trigger once your gearbox has made a complete cycle, very useful!

If you're running one of the newer G&G platforms with the G&G rotary HOP-up, check this out! The Airtech Studios TDC Conversion Set for G&G Rotary HOP-up Unit is intended to provide maximum performance from your original G&G rotary HOP-up unit. Designed specifically for the latest G&G rotary HOP-up design, this kit includes an enhanced HOP-up arm, TDC trolley, 2 x M-nubs and a centring unit.

The benefits of a TDC HOP-up unit include a stronger HOP-up effect and less chance of side-to-side shot deviation when using heavy BBs at high FPS. This part will require modification to your original outer barrel to fit, but thankfully these mods are quite easy and thoroughly explained on the Airtech Studios website. If you want your G&G Rotary-equipped AEG to reach out and touch the enemy at crazy ranges, this TDC Conversion Set is what you need!

If you're thinking of making a gearbox from scratch or you've had a disaster with your current anti-reversal latch or ARL spring, the VFC Anti Reversal Latch For V2 Gearbox will sort you out! This set includes a steel ARL and spring steel ARL spring, making this ideal for upgraded AEGs with strengthened gearsets.

The anti-reversal latch in your airsoft electric gun is responsible for preventing reverse motion of the gears, which could cause damage to your piston and gears if it happens during a cycle of the gearbox.

This Anti-reversal latch set is intended for version 2 gearboxes and is a great spare or repair to have in your toolbox for those who like a bit of DIY when their AEGs stop cooperating. If you've lost that awkward little ARL spring, this set offers an easy route to replacing it for relatively cheap too!

If you want to ramp up your semi-auto speed and you run a G&G, you need this! The Airtech Studios STC™ Speed Trigger Converter for G&G AEGs is designed to reduce trigger travel to a hair, allowing you to seriously spam semi in the most efficient way possible.

The STC is designed to fit a wide range of G&G AEGs (full compatibility list on Airtech Studios Website) and makes use of your original trigger, reducing trigger travel by 80%! This set will require opening the gearbox to install so we don't recommend it for newcomers. If you're a CQB player needing an edge, this will do it!

The G&G Armament G2 Tappet Plate For V2 AEG is a reinforced AEG Tappet Plate for use with version 2 gearboxes. It is specially formulated to be strong yet flexible enough to bend slightly. The plate is constructed from extremely lightweight polymer and is designed to be attached to the air nozzle and sector gear. This process controls the feeding of BBs from the magazine into the hop up chamber.

It is compatible with almost every Version 2 gearbox on the market and comes with only the tappet plate.

If you've had motor issues and need a cheap replacement, here you go! The VFC Long Shaft Ferrite Motor is a standard-speed long shaft motor for M4/AR-15, SMG-5 (not K), G3 and P90 AEGs. The set includes a pre-installed O-type pinion gear and pinion spring, both of which are pre-installed on the shaft.

For those working on a build which pushes the limits, you will require some decent gears! Introducing the VFC Avalon 18:1 Steel gearset, a standard ratio gearset constructed from hardened steel. The set includes a spur gear, sector gear, and bevel gear which are all precisely machined for perfect meshing and smooth, reliable performance.

These gears are tuned to an 18:1 ratio, which means for every 18 revolutions of your motor the gearbox will complete one full cycle. The benefit of using standard ratio gears is that you can make either a DMR or a high-rate-of-fire CQB beast without wholly committing to one or another, meaning you can adapt your build to the scenario which suits, and without overstressing the gearbox by running it considerably beyond its design parameters.

Treat your AEG to some premium gears and have it shooting consistently for a long long time, plus you have the flexibility of running a DMR one day, then alternating to a rapid-fire monster the next day!

If you have worn out your AEGs trigger or you want the mil-spec look to replace your current trigger, this is perfect for you! The G&G Armament Trigger For V2 Gearbox is constructed from alloy with a textured finish and is patterned after the standard curved "Milspec" trigger found on the M4A1 rifle, MK18 MOD.0 and MOD.1, along with most other M4/AR-15 rifles used in military service in the real world.

The trigger is compatible with version 2 gearboxes which are found in the vast majority of M4/AR-15 AEGs. This means that the G&G Armament Trigger For V2 Gearbox trigger should work in practically any M4/AR-15 AEG but will require the gearbox to be opened for installation.

The VFC Tappet Plate For V2 Gearbox is designed for use with version 2 gearboxes. It is specially constructed with reinforced polymer to be strong yet flexible enough to bend slightly. The plate is extremely lightweight and is designed to be attached to the air nozzle and sector gear inside your Airsoft rifle. This process controls the feeding of BBs from the magazine into the hop-up chamber so they can be shot.

It is compatible with almost every Version 2 gearbox on the market and comes with only the tappet plate. If your primary is having issues and you need a Tappet Plate for repair, the VFC Tappet Plate For V2 Gearbox has you covered!

If you're looking for a strong and lightweight nozzle for your P90, check this out! The FPS Softair CNC POM Nozzle with O-ring for P90 AEGs is made from CNC POM polymer, a massive upgrade from the factory polymer nozzles present in TM P90s and clones. The nozzle also includes an internal O-ring to maximise air seal and its ultra-strong POM construction is ideal for high rate of fire or high FPS setups.

FPS Softair is a fantastic company, offering high quality upgrades for unbeatable prices, all designed and manufactured in Italy. The techs at FPS recommend lubricating the nozzle step of your piston head before installation using silicone lubricant. If you're working on a beast of a P90 build and want it ready for anything, the FPS CNC POM Nozzle with O-ring for P90 AEGs is what you need!

If you are having trigger issues with your ARCTURUS M4/AR15 AEG this replacement original part set should cure it! The ARCTURUS Microswitch V2 for ARCTURUS AEG series includes the microswitch itself, a Deans/T-plug battery connector and spade connectors all wired together for a relatively simple installation procedure. The set should not require soldering to install, but as always, we recommend a certain level of confidence and expertise if you plan on installing this part.

Fixed up your faulty platform and get it back on the battlefield in no time!

If you want glowing BBs without making your primary any longer or fitting some bulky, slightly ugly, tracer unit, the CYMA Tracer HOP-Up Chamber for AK AEGs is a great choice! This alloy rotary HOP-up chamber integrates a tracer module, just like more expensive alternatives with the option to use red or green tracer BBs. The set includes everything you need to complete the HOP-up chamber build, including the bucking and nub.

This unit is powered by your AEG's battery through the balance cable, meaning it will only work with LiPo batteries unless you have something home-brewed in mind. The set includes 3 sets of wiring for use with 7.4V LiPo, 11.1V LiPo or custom battery solutions, all of which connect to the pre-wired connector on the HOP-up unit itself.

While it is designed for use with the CM series of AKs, this unit should work with most AKs on the market, however, potential modifications will be required to fit certain brands. Depending on your specific platform, fitting may also require modification to your receiver. As such, we only recommend this unit for those who are comfortable working on AEG internals. If this sounds like you, why not shave off length and weight from your classic Russian primary with the CYMA Tracer HOP-Up Chamber for AK AEGs!

If your AK AEG needs a revamp, the ZCI Complete V3 Gearbox w/ Micro Switch for AK AEGs is the easiest way to give it a new lease of life. This is a complete version 3 gearbox fitted with an AK nozzle, selector plate and top cover retention latch, though if you run an AR36, SG55x or SMG-5K you can swap these parts out for your original bits and use this gearbox in your replicas too. 

Inside, we have an impressive set of internal parts including 18:1 CNC steel gears, 8mm bushings, a steel quick change spring guide, a polymer piston with a full steel tooth rack, a CNC steel cylinder and CNC aluminium piston and cylinder heads. The wiring is low resistance and fitted with a mini-Tamiya connector, wired to suit front-wired and top-wired AK AEGs. The trigger is the "micro-switch" type, improving trigger response and longevity when compared to conventional copper trigger contacts. 

Complete gearboxes are the easiest way to fix gearbox issues for those who are less technically confident or those who don't have time to fiddle with the internal parts of their pride and joy. Whether you've got an AK AEG to fix, are working on a custom build or want a gearbox to learn the technical aspects of the hobby, the ZCI Complete V3 Gearbox w/ Micro Switch for AK AEGs is a fine choice!

Produced to an incredibly high quality with the best mil-spec steel rated SiCr. Every spring no matter the rating has gone through a full quality control test by ASG for your peace of mind that you are fitting a reliable spring. 

A soft Hop Rubber for Marui compatible AEGs offering an air-tight design, which comes supplied with a nub and is a purple colour.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

If you are building out your M4/AR15 AEG for maximum performance the Gate EON HOP-up unit is probably already on your list! This precise HOP-up unit is constructed from CNC machined aluminium and is a rotary style unit which applies pressure directly to the top of the HOP-up rubber/nub to minimise side-to-side deviation.

This unit is compatible with M4/AR15 AEGs and can also be used with HPA setups thanks to the included nozzle sleeve which perfectly centres the nozzle for maximum efficiency.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.

An upgrade Airsoft 6mm BB Gun inner Barrel which is compatible with Airsoft AEG Barrel Compatible Hop-Up units.