Airsoft Hop Up Units & Buckings

If you seek more accuracy and range from your AEG, the Prometheus Bridge HOP-up Tensioner for AEGs will help you achieve it! Supplied as a pack of two tensioners, these are the "Bridge" style design with a central groove designed to reduce side-to-side deviation, focussing on maximum accuracy and providing the smallest grouping possible. The contact surface provided by this HOP-up nub (another word for tensioner) is far larger than the standard, resulting in a stronger backspin effect and extended range with heavy-weight BBs. 

The two tensioners included in the set are of different colours; one purple and one black. The purple tensioner is made from softer rubber, designed for sub-350 FPS builds and the black one is slightly harder, ideal for 350 FPS and above, making it the perfect tensioner for an AEG DMR. Compatibility-wise, these tensioners should fit almost any Airsoft AEG HOP-up unit but as always is the case with internal upgrades, we only recommend these for experienced techs and those who know their way around AEG internals. If accuracy and range is your objective, the Prometheus Bridge HOP-up Tensioner for AEGs belongs in your build!

If you want tighter groupings and more range, you're not alone! Thankfully, Maple Leaf is here to make your AEG shoot like a laser beam with the OHM Silicone AEG HOP-Up Tensioner; Solid Edition. This HOP-up nub/tensioner is ideally paired with a Maple Leaf HOP-up bucking and like much-lauded "Flat HOP" nubs, is designed to provide a stronger HOP-up effect for heavy-weight BBs and to reduce side-to-side shot deviation, improving accuracy and range as long as you do your part.

The OHM Solid Edition is available in two different hardness degrees, 50° for standard FPS and BB weights and 80° for heavy BBs (0.32g+) and DMR FPS levels. The Solid Edition differs from the Hollow Edition in its solid form which prevents the tensioner from deforming when used with heavy BBs travelling at high velocity. The inner surface of the OHM is also concave, making it the perfect pairing for Maple Leaf buckings with concave contact patches.

Whether you're working on a DMR build or accurising your primary AEG, the Maple Leaf OHM Silicone AEG HOP-Up Tensioner; Solid Edition will give you the performance you need!

If you want tighter groupings and more range, you're not alone! Thankfully, Maple Leaf is here to make your AEG shoot like a laser beam with the OHM Silicone AEG HOP-Up Tensioner; Solid Edition. This HOP-up nub/tensioner is ideally paired with a Maple Leaf HOP-up bucking and like much-lauded "Flat HOP" nubs, is designed to provide a stronger HOP-up effect for heavy-weight BBs and to reduce side-to-side shot deviation, improving accuracy and range as long as you do your part.

The OHM Solid Edition is available in two different hardness degrees, 50° for standard FPS and BB weights and 80° for heavy BBs (0.32g+) and DMR FPS levels. The Solid Edition differs from the Hollow Edition in its solid form which prevents the tensioner from deforming when used with heavy BBs travelling at high velocity. The inner surface of the OHM is also concave, making it the perfect pairing for Maple Leaf buckings with concave contact patches.

Whether you're working on a DMR build or accurising your primary AEG, the Maple Leaf OHM Silicone AEG HOP-Up Tensioner; Solid Edition will give you the performance you need!

Designed specifically for the Gate EON CNC Rotary HOP-up chamber, the Airtech Studios Full Upgrade Set for Gate EON HOP-up Chamber includes a TDC trolley, 2 x M-nubs and an inner barrel centring unit. This set is designed to convert the Gate EON into a true TDC unit, giving you more range and accuracy than ever before!

The benefits of a TDC HOP-up unit include a stronger HOP-up effect and less chance of side-to-side shot deviation when using heavy BBs at high FPS. This part will require a certain amount of expertise to install but thankfully, the process is fully explained on the Airtech Studios website. If you want to get the most out of your Gate EON HOP-up chamber, this kit will do the trick!

If you want your sidearm to be capable of really reaching out, a HOP-up upgrade should be top of your list! The Maple Leaf HOP-up Chamber for VFC/WE/TM EU-Series GBB is constructed from alloy and supplied with a steel HOP-up arm and aluminium "I-key" style tensioner, promising tighter tolerances than the stock HOP-up unit which should translate to better air seal qualities, consistency and thus better accuracy downrange.

This set is compatible with VFC, WE and Tokyo Marui EU-series GBB pistols but should also fit most Tokyo Marui clone EU-series pistols, though as always, we recommend upgrade parts only for the knowledgeable and confident!

If you are having HOP-up troubles with your M4 platforms, don't worry, G&G has just the thing for you! This HOP-up chamber is a replacement part and comes with the necessary pieces for installation, but does not include a HOP-up rubber or a nub. The main chamber is made from high-density polymer and is compatible with all M4-style AEGs which have V2 Gearboxes. It's a reliable and high-quality replacement part that will help your AEG shoot like brand new again!

The rotary adjustment dial is the latest and greatest way of setting your rifle's HOP. It is much more accurate and provides finer increments of adjustments when compared to previous gear-style HOP-up adjustments.

If you're working on the ultimate AK AEG build, the RetroArms Precision CNC HOP-Up Chamber for AK AEGs is an integral part! This CNC machined HOP-up unit is made from 7075 Aluminium, granting it steel-like strength and flawlessly precise machining with the weight reduction perks of aluminium. 

The most unique aspect of this HOP-up unit is the inclusion of what RetroArms call the "collet nut", a threaded nut which seals the gap between the inner barrel and HOP-up chamber walls. This saves you any messing around with PTFE tape and ensures your platform's air-seal is perfect, resulting in more consistent FPS readings translating to improved accuracy downrange. 

The set includes everything you'll need to complete the HOP-up unit with the exception of the bucking, nub and inner barrel but will require assembly. As such, we only recommend this HOP-up unit to those confident working on Airsoft internals. Best used with the RetroArms CNC Version 3 Gearbox but compatible with almost every TM-based AK AEG on the market, the RetroArms Precision CNC HOP-Up Chamber for AK AEGs is a fantastic upgrade option for performance-oriented AK build!

Turn your stock ASG Scorpion EVO's HOP-up chamber to a TDC design without having to replace the whole unit. This kit includes everything you need to install the system into your current HOP-up chamber. It is compatible ONLY with ASG Scorpion EVOs and will not fit in any other HOP-up systems.

TDC (Top-Down-Centre) HOP units are incredibly sought after due to the increased friction they add to BBs, which increases the effectiveness of the HOP applied to your BBs. By installing TDC to the stock HOP-up you are guaranteed compatibility with the platform.

The set also includes rubber nubs, these ensure the HOP is stable while BBs accelerate through the unit, further improving the performance and consistency of your ASG Scorpion EVO. This is a very complex installation process and we only recommend it if you are confident in your understanding and ability to fit it to your HOP-up chamber.

If you want to upgrade your Umarex Glock and build a sleeper of a long ranged pistol setup, this is the HOP-up unit you need! The Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is compatible with the Umarex/VFC Glock 17 Gen.5, Glock 19 Gen.4, Glock 19X and Glock 45 GBB pistols and is constructed from alloy for improved strength. The unit is supplied with two HOP-up arms with one pre-installed, giving you a spare to keep handy or modify for some experimental HOP-up setups. 

The tolerances of this unit are far more precise than the original, offering better air seal and gas efficiency, translating into better effect on target and better consistency. If you want to shock the enemy by landing a hit with your pistol at long range, the Maple Leaf HOP-Up Chamber for Umarex/VFC Glock is the key!

A replacement Hop-Up Unit for Airsoft AK Rifles, designed and constructed to high standards by Action Sports Games in Denmark as part of their Ultimate Upgrade Parts Range. 

A highquality replacement Hop-Up unit designed and created by Action Army to fit TM Spec VSR / BAR-10 Airsoft Bolt Action Sniper Rifles, to enhance and perfect the performance of the weapon.

If you are looking to upgrade your HOP unit, in most cases these days there isn't much to gain if you already have a rotary unit in your gun. This is the exception! Krytac has taken the rotary HOP unit and added in audible and tactile clicks when you adjust, locking the unit in its set position and allowing you to adjust accurately even in low light conditions! The unit also has engraved numerical setting indicators around the adjuster, allowing you to keep track of which setting works best with which BB weight, avoiding the trail and error! This package also includes a KRYTAC HOP rubber.

Whether your HOP-up rubber is worn out or you are seeking an upgrade, the Novritsch HOP-up Bucking for SSP1/SSP5 GBB pistol is one to keep an eye on. This HOP-up bucking is a big reason that Novritsch pistols have such incredible range, and being a VSR/GBB style HOP-up rubber, this should be compatible with most TM-based GBB pistol designs as well as the VSR-10 sniper rifle series.

If you want your Hi-Capa to shoot like a beast, the Maple Leaf Steel HOP-up Chamber Set for Hi-Capa GBB Pistols belongs inside. This steel HOP-up chamber should improve consistency and air seal by tightening tolerances between your HOP-up bucking and air nozzle and is far stronger than standard alloy HOP-up units as a bonus. 

Included in the set is an enhanced HOP-up arm, a CNC machined adjuster dial and the legendary Maple Leaf I-Key which is designed to provide a "flat HOP" effect and is ideally used with heavy BBs (0.28g+). Compatibility-wise, this unit is designed for Tokyo Marui Hi-Capa GBB pistols and should fit most other Hi-Capas, though modification and tuning may be required. If you want to use your Hi-Capa as a primary and need range to compete with rifles, the Maple Leaf Steel HOP-up Chamber Set for Hi-Capa GBB Pistols is ideal!

If you're building out your Shadow 2 GBB and seeking more accuracy, the Maple Leaf Complete HOP-Up Chamber for KJW/ASG Shadow 2 GBB is an easy way to get there! This complete HOP-up chamber group is practically a drop-in fit and pre-built so you don't have to do any of the fiddly stuff!

The set includes a Maple Leaf 6.02mm Tightbore inner barrel made from stainless steel, the Maple Leaf HOP-up chamber and a Maple Leaf Autobot 60° HOP-up bucking paired with the much-lauded Maple Leaf I-Key. Compatibility-wise, the Complete HOP-Up Chamber should work flawlessly with both ASG and KJ Works CZ Shadow 2 GBB pistols. Installing this set should boost FPS and gas efficiency slightly thanks to tighter tolerances, improve accuracy potential and extend range, giving your sidearm-sized platform a primary-like punch!

Are you having HOP-up troubles with your ARCTURUS AK platforms? This is exactly what you need! This ARCTURUS Polymer Rotary Hop-Up Unit W/Magwell Spacer For Ak Serie is a complete replacement part and comes with the necessary pieces for installation. The main chamber is made from a sturdy plastic polymer and is compatible with ARCTURUS AK AEGs which have V3 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

The Magwell Spacer is designed to fit into the magazine well of any ARCTURUS AK and fill the gap between the HOP-up unit and the front of the magazine well to protect it and prevent over-insertion. We only recommend installing this HOP-up unit if you are confident in your abilities, some parts are small and installation must be precise.

Fix your AK replica's damaged HOP-up with the ARCTURUS Rotary Hop-Up Chamber For ARCTURUS AKs and you will have your replica shooting prime and proper in no time!

An aftermarket upgrade/replacement Inner Barrel and HOP Unit/Rubber for Hi-Capa Series Airsoft Pistols, specifically the Army Armament R601. This awesome package provides you with a Precision 6.02mm Inner Barrel, as well as a HOP Chamber, ML 70° Bucking and 'I-Key Delayer', to improve range, accuracy and precision.

The installation of this unit is relatively straightforward, and will be compatible with beginner/experienced techs.

Compared to the Autobot, this hop up rubber is far stronger and has a flatter shaped contact patch inside. 

A 50 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

Are you having HOP-up troubles with your ARCTURUS AK platforms? This is exactly what you need! This HOP-up chamber is a complete replacement part and comes with the necessary pieces for installation. The main chamber is made from a sturdy plastic polymer and is compatible with ARCTURUS AK AEGs which have V3 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

We only recommend installing this HOP-up unit if you are confident in your abilities, some parts are small and installation must be precise.

Fix your AK replica's damaged HOP-up with the ARCTURUS Rotary Hop-Up Chamber For ARCTURUS AKs and you will have your replica shooting prime and proper in no time!

This TDC hop up chamber from TTI is made from CNC aluminium, it is made for Hi-Capa GBB handgun replicas from Tokyo Marui / WE. This hop-up chamber has a TDC adjustment system operated via a notched wheel at the bottom of the chamber.

This is a replacement HOP-up rubber for the Novrtisch ''Full thrust'' SSG10 Sniper rifle and is only compatible with this platform due to the increased size of the HOP-up chamber and inner barrel. It is the perfect replacement piece to increase the lifespan of your Full Thrust SSG10 and have it shoot like a laser on the battlefield. 

If you're noticing a dip in your SSG10 Full Thrust Sniper Rifle and you want a quick fix that is affordable, the Novritsch SSG10 Full Thrust Bucking is here for you!

An absolute monster of an upgrade to make to your weapon. The external surface is ribbed to keep your inner barrel more stable inside your hop up unit with next to no play at all after you have fully re-assembled your Airsoft weapon.

A 70 degree hop rubber for VSRs and unbridged barrels, designed to maximise range at a slight cost to accuracy. 

If you are building an Airsoft DMR this enhanced HOP-up rubber set from Laylax Prometheus should be on your shopping list! Laylax Prometheus has a fantastic reputation for enhanced HOP-up buckings, providing the Purple bucking used in the Bolster Armouries ONYX AEG series thanks to Prommy's wealth of experience and pedigree. We love them, and we think you will too!

This bucking is designed for builds shooting at 350-400 FPS, putting it right in the sweet spot for DMRs. When installed, this set should improve range, enhance air seal and allow for heavier weights of ammo to be used. Compatibility-wise, this should fit the vast majority of Airsoft AEGs which use the standard TM AEG style HOP-up bucking/rubber and nub, which is almost all of them!

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from aluminium and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle, improving accuracy. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from aluminium and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle, improving accuracy. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from aluminium and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle, improving accuracy. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from aluminium and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle, improving accuracy. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!

The NexxSpeed hop unit is the closest thing to a true Top Down Centre (TDC) hopup.

Machined from aluminium and cut with precise CNC tolerances giving you a great seal for your nozzle. 

This hop unit has multiple grub screws to keep your hop up in place without any wiggle, improving accuracy. 

If you haven't tried TDC hop units, then you're missing out on so much potential from your capa!!