- For TM Hi-Capa 4.3 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
New from Dr.Black and new to the UK!
The lightest slide on the market - increasing cycling speeds and decreasing recoil.
The quality of these things is just unreal!
And yes, you can use these with 5.1 frames, just add a 4.3 outer barrel, 4.3 guide plug and 4.3 rear sights and away you go! Trust us, they look better on 5.1 frames ;)
* Colours may vary from Pictures
- For TM Hi-Capa 4.3 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
New from Dr.Black and new to the UK!
The lightest slide on the market - increasing cycling speeds and decreasing recoil.
The quality of these things is just unreal!
And yes, you can use these with 5.1 frames, just add a 4.3 outer barrel, 4.3 guide plug and 4.3 rear sights and away you go! Trust us, they look better on 5.1 frames ;)
* Colours may vary from Pictures
- For TM Hi-Capa 4.3 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
New from Dr.Black and new to the UK!
The lightest slide on the market - increasing cycling speeds and decreasing recoil.
The quality of these things is just unreal!
And yes, you can use these with 5.1 frames, just add a 4.3 outer barrel, 4.3 guide plug and 4.3 rear sights and away you go! Trust us, they look better on 5.1 frames ;)
* Colours may vary from Pictures
- For TM Hi-Capa 4.3 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
New from Dr.Black and new to the UK!
The lightest slide on the market - increasing cycling speeds and decreasing recoil.
The quality of these things is just unreal!
And yes, you can use these with 5.1 frames, just add a 4.3 outer barrel, 4.3 guide plug and 4.3 rear sights and away you go! Trust us, they look better on 5.1 frames ;)
* Colours may vary from Pictures
- For TM Hi-Capa 4.3 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
New from Dr.Black and new to the UK!
The lightest slide on the market - increasing cycling speeds and decreasing recoil.
The quality of these things is just unreal!
And yes, you can use these with 5.1 frames, just add a 4.3 outer barrel, 4.3 guide plug and 4.3 rear sights and away you go! Trust us, they look better on 5.1 frames ;)
* Colours may vary from Pictures
- For TM Hi-Capa 4.3 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
New from Dr.Black and new to the UK!
The lightest slide on the market - increasing cycling speeds and decreasing recoil.
The quality of these things is just unreal!
And yes, you can use these with 5.1 frames, just add a 4.3 outer barrel, 4.3 guide plug and 4.3 rear sights and away you go! Trust us, they look better on 5.1 frames ;)
* Colours may vary from Pictures
- For TM Hi-Capa 4.3 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
New from Dr.Black and new to the UK!
The lightest slide on the market - increasing cycling speeds and decreasing recoil.
The quality of these things is just unreal!
And yes, you can use these with 5.1 frames, just add a 4.3 outer barrel, 4.3 guide plug and 4.3 rear sights and away you go! Trust us, they look better on 5.1 frames ;)
* Colours may vary from Pictures
- For TM Hi-Capa 5.1 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
Dr.Black 'Type-901' 5.1 Slide!
Coming in at only 50g making them as light as 3D printed slides but with lots more durability!
The quality of these things is just unreal!
* Colours may vary from Pictures
- For TM Hi-Capa 5.1 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
Dr.Black 'Type-901' 5.1 Slide!
Coming in at only 50g making them as light as 3D printed slides but with lots more durability!
The quality of these things is just unreal!
* Colours may vary from Pictures
- For TM Hi-Capa 5.1 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
New from Dr.Black and new to the UK!
The quality of these are just unreal!
* Colours may vary from Pictures
- For TM Hi-Capa 5.1 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
New from Dr.Black and new to the UK!
The quality of these things are just unreal!
* Colours may vary from Pictures
- For TM Hi-Capa 5.1 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
New from Dr.Black and new to the UK!
The quality of these things are just unreal!
* Colours may vary from Pictures
- For TM Hi-Capa 5.1 GBB Pistols
- Lightweight CNC 6063 Aluminum
- Anodized Finish
New from Dr.Black and new to the UK!
The quality of these things are just unreal!
* Colours may vary from Pictures
- The best choice you can find in the airsoft market.
- Precision CNC with high grade aluminium
- Run at a lighter and higher rate recoil!
Newest LIMCAT slides kits available!
These are the open variants so come with a compensator and cocking handle.
They can be used without the compensator and with a standard outer barrel though
You will very rarely see any of these in the UK, be the first!!
Material: Aluminium (slide, compensator, cocking handle, blowback housing) / Steel (outer barrel, guide rod)
- The best choice you can find in the airsoft market.
- Precision CNC with high grade aluminium
- Run at a lighter and higher rate recoil!
Newest LIMCAT slides kits available!
These are the open variants so come with a compensator and cocking handle.
They can be used without the compensator and with a standard outer barrel though
You will very rarely see any of these in the UK, be the first!!
Material: Aluminium (slide, compensator, cocking handle, blowback housing) / Steel (outer barrel, guide rod)
- Designed for TM Hi-Capa GBB Pistols
- Made out of CNC aluminium and steel
- Available in many colours!
What better way to finish of a capa, then with an Aluminium Grip!
Mostly aluminium construction with Steel Mag catch and screws.
You're not going to want to miss out on these!!
*Standard magwells do not fit on these grips
- Designed for TM Hi-Capa GBB Pistols
- CNC aluminium and steel for great durability
- Comes in three colour variants
If you want something new and flashy to show up to your next game with... then get this!
New from GunSmith Bros, the TTI SAND VIPER open set
These beauties are optic ready and come with a lot of what you need to get your build well underway.
With a mixture of steel and aluminium parts it will be as reliable able as ever
Material : Aluminum slide, compensator and blowback housing, cocking handle / Steel outer barrel and recoil guide rod
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Aluminium, FKM O-rings, delrin and brass
- Improvements in stability
The CNC Aluminum/Delrin Short Stroke Buffer is a combination of aluminum, FKM O-rings, delrin and brass for improvements in stability, durability and overall performance. It helps reloading fast and reduces recoil.
The O-ring FKM has very special properties: oil resistance, heat resistance from –40 °C to +220 °C, acid chemical resistance, extremely good wear resistance.
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Aluminium, FKM O-rings, delrin and brass
- Improvements in stability
The CNC Aluminum/Delrin Short Stroke Buffer is a combination of aluminum, FKM O-rings, delrin and brass for improvements in stability, durability and overall performance. It helps reloading fast and reduces recoil.
The O-ring FKM has very special properties: oil resistance, heat resistance from –40 °C to +220 °C, acid chemical resistance, extremely good wear resistance.
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Aluminium, FKM O-rings, delrin and brass
- Improvements in stability
The CNC Aluminum/Delrin Short Stroke Buffer is a combination of aluminum, FKM O-rings, delrin and brass for improvements in stability, durability and overall performance. It helps reloading fast and reduces recoil.
The O-ring FKM has very special properties: oil resistance, heat resistance from –40 °C to +220 °C, acid chemical resistance, extremely good wear resistance.
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Aluminium, FKM O-rings, delrin and brass
- Improvements in stability
The CNC Aluminum/Delrin Short Stroke Buffer is a combination of aluminum, FKM O-rings, delrin and brass for improvements in stability, durability and overall performance. It helps reloading fast and reduces recoil.
The O-ring FKM has very special properties: oil resistance, heat resistance from –40 °C to +220 °C, acid chemical resistance, extremely good wear resistance.
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Aluminium, FKM O-rings, delrin and brass
- Improvements in stability
The CNC Aluminum/Delrin Short Stroke Buffer is a combination of aluminum, FKM O-rings, delrin and brass for improvements in stability, durability and overall performance. It helps reloading fast and reduces recoil.
The O-ring FKM has very special properties: oil resistance, heat resistance from –40 °C to +220 °C, acid chemical resistance, extremely good wear resistance.
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Aluminium, FKM O-rings, delrin and brass
- Improvements in stability
The CNC Aluminum/Delrin Short Stroke Buffer is a combination of aluminum, FKM O-rings, delrin and brass for improvements in stability, durability and overall performance. It helps reloading fast and reduces recoil.
The O-ring FKM has very special properties: oil resistance, heat resistance from –40 °C to +220 °C, acid chemical resistance, extremely good wear resistance.
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Aluminium, FKM O-rings, delrin and brass
- Improvements in stability
The CNC Aluminum/Delrin Short Stroke Buffer is a combination of aluminum, FKM O-rings, delrin and brass for improvements in stability, durability and overall performance. It helps reloading fast and reduces recoil.
The O-ring FKM has very special properties: oil resistance, heat resistance from –40 °C to +220 °C, acid chemical resistance, extremely good wear resistance.
- Crafted with precision and the highest quality materials
- Unique and eye-catching design
- Dominate the field like never before!
Introducing Neo.2, the ultimate base set for building your very own M4 airsoft replica. This custom-designed receiver and matching handguard set are CNC-cut to perfection and coated with a durable Cerakote finish that comes in a base colour with a contrasting splatter design, making it a true standout on the field.
Crafted with precision and the highest quality materials, Neo.2 is designed to provide an extra level of grip and protection to your airsoft gun. Its unique and eye-catching design is sure to impress even the most seasoned players.
The Neo.2 receiver and handguard set is put together quickly and is of course compatible with most M4 parts, providing maximum versatility and adaptability. This product is perfect for both beginners and advanced airsoft enthusiasts who want to elevate their gameplay to the next level.
Neo.2 is not just an upgrade in aesthetics, but in functionality as well. The Cerakote finish provides an extra layer of protection against wear and tear, while the CNC-milled cuts ensure maximum precision and stability during gameplay.
Don't settle for an ordinary airsoft build when you can have a standout one with Neo.2. Get yours today and dominate the field like never before.
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Made from 7075 Aluminium
- Reduced inertia, increased stability
The CNC Aluminium Hammer is machined with precise CNC tolerances from 7075 Aluminium and Brass for improvements in stability, durability and overall performance.
It's made from 7075 Aluminium for light weight in order to reduce inertia, increase stability. But it's still stiff enough to working amazingly!
The rubber padding on the hammer can help increase durability for the Frame.
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Made from 7075 Aluminium
- Reduced inertia, increased stability
The CNC Aluminium Hammer is machined with precise CNC tolerances from 7075 Aluminium and Brass for improvements in stability, durability and overall performance.
It's made from 7075 Aluminium for light weight in order to reduce inertia, increase stability. But it's still stiff enough to working amazingly!
The rubber padding on the hammer can help increase durability for the Frame.
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Made from 7075 Aluminium
- Reduced inertia, increased stability
The CNC Aluminium Hammer is machined with precise CNC tolerances from 7075 Aluminium and Brass for improvements in stability, durability and overall performance.
It's made from 7075 Aluminium for light weight in order to reduce inertia, increase stability. But it's still stiff enough to working amazingly!
The rubber padding on the hammer can help increase durability for the Frame.
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Made from 7075 Aluminium
- Reduced inertia, increased stability
The CNC Aluminium Hammer is machined with precise CNC tolerances from 7075 Aluminium and Brass for improvements in stability, durability and overall performance.
It's made from 7075 Aluminium for light weight in order to reduce inertia, increase stability. But it's still stiff enough to working amazingly!
The rubber padding on the hammer can help increase durability for the Frame.
- For TM Hi-Capa 4.3/5.1 & 1911 GBB Pistols
- Made from 7075 Aluminium
- Reduced inertia, increased stability
The CNC Aluminium Hammer is machined with precise CNC tolerances from 7075 Aluminium and Brass for improvements in stability, durability and overall performance.
It's made from 7075 Aluminium for light weight in order to reduce inertia, increase stability. But it's still stiff enough to working amazingly!
The rubber padding on the hammer can help increase durability for the Frame.
About Hi-Capa Hub
At Patrol Base, we work closely with our friends over at Hi-Capa Hub to provide the latest and greatest upgrade parts for one of Airsoft's most popular sidearms; the legendary Tokyo Marui Hi-Capa GBB Pistol.
From stylish lightweight slide upgrades from Dr.Black to enhanced TDC HOP-up units from TTI Airsoft and hard-wearing steel controls from Airsoft Masterpiece, you'll find a fantastic range of Hi-Capa upgrade parts in our Hi-Capa Hub section!