Viewing 30 of 79.
grid
list
£16.99
  • Full Alloy Build
  • 20mm RIS / RAS
  • Railed Top Cover

A replacement dust cover for the top of CYMA CM.040 AK47 Variant Rifles, designed to add a top 20mm RIS / RAS Rail for the attachment of Sights and Scopes without the use of a Side Scope Mount. 

£6.99
  • Ready To Install
  • Spring Supplied
  • Ambidextrous Design

An alloy, ambidextrous replacement mag release for M4/15/16 variant rifles that is ready to install right out of the packet.

£9.99
  • 3D Printed polymer construction
  • Fits SMG-5 Low, mid and high-cap magazines
  • Allows UTR45 AEGs to feed from SMG-5 AEG mags

If you want the 9mm look for your UTR45, Hades Airsoft have what you need! The MP5/SMG-5 AEG Magazine Adapter for UTR45 fits the top of SMG-5 magazines and allows them to be loaded into the Double Eagle UTR45 AEG, giving you more magazine options than ever before. 

The adapter is constructed from 3D-printed polymer and is an adapter for the magazine and not for the gun, meaning you will need one adapter per SMG-5 magazine you plan to use. The perk of this system is that you can use your normal UTR45 magazines and complement them with SMG-5 magazines with adapters without having to change anything, including low, mid, high-caps and even drum magazines! 

£6.99
  • Steel construction
  • Original replacement part
  • For CYMA CM.097 AEG series

If your dust cover has fallen off and been lost, the CYMA Ejection Port Dust Cover for M4/AR-15 AEG is the solution! This replacement original part is designed for the CYMA CM.097 AEG series but should also fit M4/AR-15 AEGs from other brands. The dust cover is constructed from steel but does not include the long bar/pin needed to mount it to an AR receiver, so make sure you still have yours and you should be set!

£8.99
  • For AK AEG
  • Steel construction
  • Includes mounting screw

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

£8.99
  • For AK AEG
  • Steel construction
  • Includes mounting screw

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

£28.99
  • Alloy build
  • 20mm RIS/RAS
  • Railed top cover

Constructed from lightweight alloy, the cover is easily fit by swapping it out with the original folding dust cover. With a rail measuring over 7 inches, this cover gives your AK some much-needed customisation options to which you can attach the sight or scope of your choosing. A scope can now be mounted to the very rear of your dust cover, which gives you a long sight radius.

The cover is installed in place of your rear sight by removing the rear sights' pin. Give your AK some love!

£7.99
  • Replacement original part
  • Compatible with CYMA AK AEG series
  • Black finish AK-74 style 

If you have lost or damaged your original AK AEG bolt carrier it will probably still work, but man, is it ugly! CYMA's Charging Handle/Mock Bolt for AK AEG is a drop-in replacement part which solves this aesthetic issue, providing a black-finished alloy mock bolt carrier mimicking the finish applied to the real AK-74 series bolt carriers. This part will fit almost all CYMA AK AEGs and should also fit others with TM AEG compatibility. 

£10.99
  • Replacement magazine well
  • For Specna SA-G series AEG
  • Allows AR36 to use M4/AR-15/STANAG magazines

If your team use M4s but you prefer the AR36 this will suit your needs! This replacement magazine well will allow you to share magazines with your team and use smaller and more prevalent M4 magazine pouches.

£4.99
  • Original replacement part set
  • For CYMA AK AEGs, may fit other TM clones
  • Includes charging handle rod, spring & top cover latch

If you have lost your AK AEG charging handle spring, rod or top cover retention latch you are in luck! The CYMA Charging Handle Rod & Spring Set for AK47/74 AEG is an original replacement part set for CYMA AKs but should also fit other Tokyo Marui clone AK series AEGs as well. The set includes the charging handle spring, guide rod and top cover retention latch.

£10.99
  • Original replacement KRYTAC part
  • Aluminium charging handle
  • Hard anodized finish

If your M4/AR15 AEG's charging handle is looking a bit tired, why not replace it for that box-fresh look! The M4/AR15 charging handle from KRYTAC is an original replacement part for KRYTAC M4/AR15 AEGs but will fit most other M4 AEGs with a version 2 gearbox. Included in the set are the charging handle and charging handle latch, the latter of which is pre-installed on the handle. The charging handle is constructed from aluminium and has a matt black hard anodized finish.

£49.99
  • Alloy construction
  • For CYMA CM.097 series AEG
  • Includes charging handle, dust cover, mock bolt

If you want to hot swap upper receivers like a real operator, now you can if you have a CYMA CM.097 AEG! The CM.097 Upper receiver is a replacement original part, and could be of use to someone wanting to freshen up an old AEG, or could be used to build a specialised replacement upper receiver so you can change your CM.097 length and battlefield role quickly and easily. The upper receiver comes with a pre-installed dust cover, charging handle, mock forward assist and mock bolt carrier, so no need to source these trim parts separately! This upper is a modern design with the squared off geometry and advanced look, making it a sure choice for a 21st century high speed M4/AR15 build.

£4.99
  • Zenit Style
  • Textured Surface
  • Alloy Constructed

An Aluminium constructed charging handle extension for AK style replicas.

£9.99
  • Steel construction
  • Fits most AK47/74 AEGs
  • Switch fire modes quickly and easily

If you want to take your Airsoft AK AEG to the next level and give yourself some AR-style advantages, the Enhanced Safety Lever from CYMA will speed up your weapons manipulation and make up for the AK's "retro" ergonomics. This safety lever is constructed from steel and is compatible with most Airsoft AK AEG rifles on the market, and lets you switch fire modes using the trigger finger, without removing your hand from the pistol grip.

£44.99
  • Extended charging handle
  • With low profile selector lever
  • For AAP-01 Assassin GBB pistol

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

£79.99
  • Alloy receiver with steel trim parts
  • For APS ASR series M4/AR15 AEGs
  • Includes charging handle, bolt catch, mag release

This Upper and Lower Receiver Set is an original replacement part for the APS ASR series M4/AR15 AEGs but may also fit other gearboxes, though it may require modification. The set includes an alloy upper and lower receiver, a bolt catch, charging handle, a magazine release, trigger guard, a steel dust cover and steel body pins. If you are building a spare upper for your APS ASR AEG this would be a perfect fit, but could also be used to add a touch of metal to a polymer M4/AR15 as long as you are okay with potentially undertaking modifications.

£5.99
  • Steel construction
  • Replacement original parts set
  • For Delta Armory M4/AR-15 AEGs

If you've misplaced parts from your dust cover, this set should cure that! The Delta Armory Steel Dust Cover for M4/AR-15 AEGs is a replacement original part set for Delta Armory M4/AR-15 platform AEGs but should also fit most other brands, though we cannot guarantee it. The set includes the dust cover, axis pin, c-clip, and spring.

£59.99
  • Alloy construction
  • Body pins, bolt catch, mag release, fire selector included
  • For CYMA CM.097 Platinum Edition M4/AR-15 AEG

If your CM.097 lower receiver is damaged maybe it is time to replace it with a fresh one! The CYMA Alloy Lower Receiver for CM.097 M4/AR-15 AEG is a replacement original part for the CYMA CM.097 AEG series and is constructed from alloy. The body pins are constructed from steel for maximum strength, and the fire selector markings are finished in a modern style, with coloured bullet pictograms to indicate each mode of fire.

The set includes all body pins, the fire selector, the bolt catch and the magazine release, meaning no fiddling around trying to swap the trim parts from your old receiver, just drop your gearbox straight in!

£4.99
  • Replacement original part
  • For AK Platform AEG
  • If you've lost yours, you're in luck!

We all lose small parts from time to time, luckily CYMA are happy to sell individual components like this! The AK Top Cover Latch from CYMA attaches to the gearbox shell, and with the help of the charging handle spring, holds your top cover on! The latch is compatible with version 3 gearbox shells, and TM-based AK designs. Quite an important bit I'm sure you agree...

£4.99
  • Alloy construction
  • Replacement original part
  • For Delta Armory M4/AR-15 AEGs

If you've lost your bolt catch, you're in luck! The Delta Armory Mock Bolt Catch for M4/AR-15 AEGs is a replacement original part for Delta Armory M4/AR-15 AEGs but may also fit certain other brands, provided they don't have a functional bolt catch and use a bolt catch style which sits in the receiver recess and isn't retained by screws or a pin. This bolt catch is constructed from alloy and is the standard milspec design.

£5.99
  • Steel construction
  • Replacement original part
  • For Delta Armory M4/AR-15 AEGs

If you've lost your front body pin, you're in luck! The Delta Armory Front Body Pin for M4/AR-15 AEGs is a replacement original part for Delta Armory M4/AR-15 AEGs but should also fit most other brands, though we cannot guarantee it. The set includes the front receiver pin and retention screw and both are constructed from steel.

£5.99
Was £7.99
Save £2.00
  • For Kublai Grip
  • Choice of Three
  • Push-Fit Installation

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.

£5.99
  • Alloy construction
  • Replacement original part
  • For Delta Armory M4/AR-15 AEGs

If you've lost important parts from your mag release, this set should sort you out! The Delta Armory Magazine Release Catch for M4/AR-15 AEG is a replacement original parts set which includes the mag catch, spring and screw, though the button itself is not included. Compatibility-wise, this set is intended for Delta Amory M4/AR-15 AEG platforms but should also fit most other brands. If your mag release spring went flying or your screw got lost in the carpet, this set should get you back up and running!

£7.99
  • For Kublai Grip
  • Choice of Three
  • Push-Fit Installation

A set of three faceplates for the Kublai Magwell Grip to give you a choice of edgy aesthetics to suit your mood for the day.

£11.99
  • CNC Aluminium construction
  • For most M4/AR15 AEGs
  • Add the custom look to your M4

If you are looking for custom parts to add some unique character to your M4/AR15 AEG to set it apart from all the others, you have found the perfect part! The 1A1 CNC bolt catch from Gate replaces the original dummy bolt catch on your M4/AR15 AEG with a precisely made alternative with a unique skull-shaped paddle. This part doesn't provide any function but looks really cool, so if you are after an aesthetic tweak for your custom M4 AEG then this part would be perfect for the job!

£19.99
  • Alloy body for AK47
  • Compatible with TM style AK AEG
  • Rear Tang for full stocks

This metal AK47 body by CYMA is constructed from Aluminium and zinc alloy and is finished in a period accurate gun metal grey. This is the perfect solution for a CM.028 or CM.522 owner who wants to give their AK a metallic feel and increased realism!

£22.99
  • Faster Reloads
  • For Scorpion Evo
  • Works w/ Mid Cap

A Glass Nylon Fiber constructed Magwell adapter for the ASG Scorpion Evo, which serves as a reference point for your lead hand, and makes guiding a fresh Magazine into the Magwell much easier to perform from memory, allowing you to focus your attention solely on the battlefield where it belongs.

£84.99
  • Aluminium alloy construction
  • For AK with Z-Co style handguards
  • 20mm Picatinny upper rail

If you are building your dream tactical AK, a railed dust cover can be a great addition to give you more optic mounting options, and the elite tactical look. The 5KU 20mm Railed Tactical AK Receiver Cover is designed to work with Z-Co style handguards and provides a 17-slot 20mm Picatinny rail on its upper surface, and a hinge mechanism which connects it to a Z-Co handguard for functionality similar to the ASK-74U, making battery changes a breeze for those who run a top wired AK. If you are working on your own Spetsnaz build, your AK needs this!

£1.99
  • Replacement original parts
  • Front sling mount pin set
  • For CM.041 SMG-5 AEG series

The CYMA Front Sling Mount Pin for SMG-5 AEG is a replacement original part for the CM.041 SMG-5 AEG series and mounts to the front sight block to provide a sling loop on the left side. If your original sling loop is damaged or has gone missing, here is your replacement!

£3.99
  • Alloy construction
  • Rear body pin/Stock pin for SMG-5
  • Compatible with CYMA SMG-5 AEG

If you have misplaced your SMG-5's rear body/stock pin you are in luck! This CYMA original replacement part is designed for CYMA SMG-5 AEGs but may also fit others. This pin is the rear body pin which holds the stock to the receiver and is constructed from alloy.

About Our Airsoft Receiver Parts

Here at Patrol Base UK, we have a range of airsoft receivers and receiver parts that make great spares or replacements. They’re also perfect for those looking to upgrade their Airsoft assault rifle with something a little more fancy. 

From MP5, M15 and M4 receiver parts to bobby pins and changing handles, we have everything you need to deck out your weapon. Speed up the mag release on your M4 receiver, swap out your old receiver for something more lightweight, or simply add core parts to your replica. 

If you’re working on creating a customised replica, take a look at our entire Airsoft attachments and accessories offering, where you’ll find everything from M4 stocks to KeyMod rails.