Novritsch Accessories

If you're lucky enough to own a Novritsch SSP1 or SSP5 GBB pistol, load up on these! The Novritsch 29rnd Green Gas Magazine for SSP1/SSP5 GBB is constructed from alloy with a polymer baseplate, brass valves and rubber O-rings. Compatible with most Hi-capa 5.1 GBB pistols but made especially for the SSP1 and SSP5 pistols from Novritsch. 

Filling the mag with gas is as simple as sliding the baseplate off and inverting the mag to fill, as you would with other green gas magazines. Loading the BBs can be done through the feed lips with a speed loader equipped with a GBB adapter but you can also pull the follower down and load through the widened section at the bottom. If you want to maximise your kill potential, load up on mags!

If you are rocking the Novritsch SSP5 GBB pistol that thing isn't complete without a red dot sight! The Novritsch Premium Red Dot Plate for SSP5 GBB pistol is designed specifically for the SSP5 series and is constructed from CNC machined aluminium with an anodised finish. This red dot plate uses the Docter red dot sight footprint and should fit any micro red dot sight with the Docter footprint, including the Novritsch Red Dot Sight Premium V3. If you want to take pure advantage of the borderline insane performance of the SSP5 at long range, this plate is the key!

If you're running the super speedy Novritsch SSR9 DSG, you'll need some magazines to keep it well-fed! The Novritsch 120rnd Transparent Magazine for SSR9 AEGs is a mid-cap magazine constructed from transparent brown polymer, keeping the material strong while allowing you to keep track of how many BBs remain. 

Like other Airsoft mid-caps, the SSR9 Transparent magazine can be loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. When filled, this spring-loaded mid-cap won't rattle and give your position away, making it great for skirmishers who prioritise stealth and like to avoid the "tactical maracas" noise of high-cap mags. Keep your SSR9 in the fight for longer with the Novritsch 120rnd Transparent Magazine for SSR9 AEGs!

If you need more mags for your Novritsch SSG96, you've found them! The Novritsch 22rnd Magazine for SSG96 Sniper Rifle is constructed from translucent polymer so you can keep track of your round count and is compatible with both the Novritsch SSG96 MK1 and MK2. The mag can be loaded through the feed lips either by hand or with a speed loader and holds 22 BBs; more than enough for such an accurate platform!

If you want to carry extra gas on the field but don't want a clumsy and cumbersome gas can on your rig, the Novritsch Portable Gas Container is the right tool for the job. This convenient and compact gas canister can hold any type of Airsoft green gas, even the highest-pressure black gas (don't fill it with CO2 though!) and fits into most grenade and smoke grenade pouches.

The Container includes an aluminium cap which threads onto the top to protect the nozzle and a high-density foam ring to further protect the nozzle when stowed. Filling the container is as simple as it is any gas magazine, simply invert the canister and fill through the fill valve at the base.

If you're involved in longer skirmishes or like to keep a bit of extra gas handy to avoid the "dead man's click", the Novritsch Portable Gas Container belongs in your kitbag!

If you want to keep your Novritsch Hi-Capa in the game for longer, load up on these! The Novritsch 30rnd Magazine for Hi-Capa GBB Pistols; V3 is compatible with most Airsoft Hi-Capa GBBs and ideal for SSP1, SSP2 and SSP5 platforms from Novritsch. Like other green gas magazines, the fill valve is on the baseplate, requiring both the magazine and your gas container to be inverted to fill. 

Loading BBs can be carried out either through the feed lips or the follower channel when the follower is pulled and held down, either using a speed loader or by hand. If you're running a Novritsch 'Capa, a few of these are essential to keep it doing what it does best!

Do you often find yourself in disbelief when heinous skirmishers won't take their hits? Or maybe you are looking for an effortless way to compile a highlight reel mid-battle? The Novritsch ClipCam Cheater-Catcher is the best solution for capturing quick 16-second clips at the press of a single button. It captures all videos at a resolution of 1080 by 1080 and 60 frames per second; this is perfect for social media posts to show off your skills, or expose those dishonourable Airsoft skirmishers who won't confirm they have been hit.

This low-profile camera can be mounted onto a Picatinny rail and will sit lower than most red dot sights meaning that your view won't be obstructed. Captured clips can be accessed and downloaded by plugging the camera into a PC or laptop, or with the Novritsch: Product Companion mobile app. The camera itself has 30GB of storage so you have plenty of room to capture all the highlights from your day of skirmishing!

If your tools are a disorganised mess, maybe it's time to start from scratch. The Novritsch Airsoft Tool Kit (S2 Steel) provides only the tools you'll need for working on Airsoft guns, neatly contained inside a magnetically sealed polymer hard case. 

Included in the set you'll find a modular screwdriver with an extension for hard to reach places, a set of tweezers for delicate work, a valve key for valve maintenance and 48 S2 tool steel bits covering all the most common tools used for Airsoft maintenance and disassembly. 

Whether you're looking for a suppressor which can change its length to suit your mood or your MK23 needs a new can, the Novritsch Modular Suppressor V1; Standard is a fine choice! This aluminium suppressor unscrews at different lengths, allowing you to set it up as a lengthy 22.5cm or stumpy 10.5cm length, with a 14.5cm option for those in between! 

By default, the Modular Suppressor V1 mounts to 16mm CW male threads, making it perfect for MK23s, but also includes a 14mm CCW adapter which allows it to mount to most Airsoft AEGs, including the SSR9 DSG, SSR4 and other Novritsch AEGs. Inside, you'll find acoustic foam "baffles", intended to absorb the sound emitted from the muzzle and make your firing position harder to locate. 

On an AEG, this does make a slight difference, but on a MK23 the difference is staggering, turning the "crack" from the muzzle into a barely discernable dull "thud", ideal for sneaky snipers and others who appreciate the in-built discretion of the MK23/SSX23 platform. If you need a suppressor as sneaky as you are with plenty of options mounting options and a customisable, modular design, the Novritsch Modular Suppressor V1; Standard is the one to go for!

If you're looking to make the most of your SSP19's full-auto fire mode, one of these will do it! The Novritsch 49rnd Extended Gas Magazine for SSP18 GBB is constructed from alloy and an extended design with a 49rnd capacity. This green gas magazine can be filled through the fill valve on the baseplate by inverting it, as you would with any other GBB mag. 

BBs are loaded either through the feed lips at the top or by holding the follower on the front down and filling through the widened section of the follower channel at the front. While it may be heavier and bigger than a standard mag, this is really the only way to do that rapid full auto mode justice!

If you're looking for a tiny LiPo battery for your Novritsch SSE18 or CYMA CM.1xxS MOSFET equipped AEP, this is what you need. The Novritsch 7.4V 600mAh LiPo Battery measures approximately 7.3 x 1.5 x 1cm and is pre-wired with a Mini-Deans battery connector and a 3 port balance connector. 

As with other LiPo batteries, this battery should only ever be charged on a LiPo balance charger, preferably in a battery charging bag and should not be left on charge unattended under any circumstance.

The Novritsch 24rnd Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, Y&P, Stti, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas and can be refilled at the bottom, the BBs can be inserted into the magazine by pulling down the spring tab and filling up the BB chamber with a speedloader. This mag comes with a 1-stage valve and has a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 24rnd Magazine for SSX23/MK23 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

If you want your SSP18 to stand out, the Novritsch SSP18 Compensator; 14mm CCW is what you need. This CNC Aluminium compensator boasts two ports at the top and swept-back fluting on each side, giving it a speedy look ideally suited to the SSP18 aesthetic. This comp is designed specifically for the SSP18 but mounts to its 14mm CCW male threaded barrel, meaning it can be used on other platforms but compatibility is not guaranteed. 

With numerous colour options available to suit any taste, the Novritsch SSP18 Compensator is a great way to customise your SSP18 and make it truly yours. Paired with Novritsch's magwell, outer barrel and other colourful CNC aluminium parts, you can turn your SSP18 into a unique beast and even use the comp to hide an extended 130mm inner barrel for more accuracy and muzzle energy. 

If you want your SSP18 to stand out, the Novritsch SSP18 Compensator; 14mm CCW is what you need. This CNC Aluminium compensator boasts two ports at the top and swept-back fluting on each side, giving it a speedy look ideally suited to the SSP18 aesthetic. This comp is designed specifically for the SSP18 but mounts to its 14mm CCW male threaded barrel, meaning it can be used on other platforms but compatibility is not guaranteed. 

With numerous colour options available to suit any taste, the Novritsch SSP18 Compensator is a great way to customise your SSP18 and make it truly yours. Paired with Novritsch's magwell, outer barrel and other colourful CNC aluminium parts, you can turn your SSP18 into a unique beast and even use the comp to hide an extended 130mm inner barrel for more accuracy and muzzle energy. 

If you've treated yourself to a Novritsch AEG or GBBR, treat it to some of these! The Novritsch 0.28g BIO BBs are high-grade biodegradable BBs ideal for outdoor skirmishes and platforms with upgraded HOP-up parts. These BBs are supplied in a resealable bag of approximately 2500 BBs, plenty to keep you going!

The extra weight of 0.28g BBs lets them punch through foliage more effectively and resist wind for better accuracy at long range, essential for AEGs with upgraded HOP-up units, including Novritsch platforms! If you need high-grade biodegradable 0.28g BBs, these are some of the best around!

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

If you want to keep your beast of a Novritsch pistol shooting perfectly in cold weather, you'll need one of these! The Novritsch 31rnd CO2 Magazine for SSP1/SSP5 GBB Pistol is constructed from alloy with a polymer baseplate and is compatible with both the SSP1 and SSP5 GBB pistols.

The mag is loaded either through the feed lips or the follower channel when the follower is held down using a speed loader or loading tool. If you're new to CO2, we recommend giving our CO2 guide a quick read so you can stay abreast of maintenance and CO2-specific safety issues.

This mag uses 12g unthreaded CO2 capsules, one of which needs to be installed inside the magazine shell. To access the CO2 compartment, simply press the small button on the bottom and slide the baseplate off. Underneath, you will find the CO2 plug which can be removed with the included Allen key or a flat tool if you don't have the Allen key handy. Install your CO2 capsule inside, tighten the plug down until you hear the capsule pierce and replace the baseplate; you are now good to go!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch LiPo Balance Battery charger is designed to charge 2/3 Cell LiPo batteries. When you plug in your battery, the LEDs will light up indicating the status of each cell. When all the cells are charged and balanced, the LEDs will turn green. The battery charger also has a built-in overcharge protection feature that prevents batteries from overcharging. This charger can only charger 7.4V or 11.1V LiPo batteries.

This Novritsch charger is a great budget charger and comes with a power supply so you can plug the charger into a wall socket. This offers a simple approach to charging, with no setup required, you can simply plug your battery in and wait. This is perfect for any Airsoft Skirmisher who uses LiPo batteries and desires a hassle free experience.

The Novritsch Red Dot Sight V3 is a high-quality product that is fashioned after real military red dot sights. It is ultra low-profile and comes with a Picatinny mounted riser so you can elevate your sight and your gameplay. The riser pairs well with a magnifier for the additional range if you are playing outdoors. It has 11 levels of brightness allowing you to adapt to any possible condition on the field. Neither rain nor sunshine will prevent you from hitting your target!

It also features a protective rubber finish that ensures this red dot is scratch-resistant and the additional Lexan cap in front of the Red Dot's lens makes this sight BB-resistant, we still recommend an additional lens protector just to be safe. The sight can withstand rainy days and is certainly shockproof, tested on real steel rifles by members of the Novritsch team.

This stunning sight will solidify you as a skirmish superstar, ensuring you will walk all over your foes and come out victorious.

If you're running a LiPo-powered AEP, the Novritsch SSE18 USB Charger will keep it powered up! Designed for the SSE18 battery but also compatible with CYMA CM.xxxS series AEP LiPo batteries, this LiPo charger charges 7.4V AEP LiPos via the balance connector and connects to any USB jack. As with any LiPo charger, we recommend charging in a LiPo Safe Charging Bag and never leaving your LiPo on charge unattended. 

This Kill Flash for Novritsch 1-4x Variable ''LPVO'' Scope, will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

When installed, the honey-comb design limits the amount of light being allowed to enter the lens, which on a sunny day will lead to a less fuzzy and distracting image, where you will find it much easier to pick out details/targets. It also functions as a lens protector and can save your precious lens from a couple of BB hits before letting a round through. The other benefit of this kill flash is that it prevents the sun from bouncing off your lens and lighting your lens up like bonfire night - which would massively give your position way.

If you're looking for an excellent medium to long-range optic with adjustable zoom and focus to handle targets that may get a little too close for comfort, then the Novritsch 1-4x Variable Scope “LPVO” is exactly what you require. This magnified riflescope is an LPVO (Low Power Variable Optic), meaning it offers variable magnification from 1x up to 4x, ideal for medium-range engagements mounted on an assault rifle, DMR or sniper rifle.

This Novritsch LPVO offers windage and elevation adjustment via a pair of tactile adjustable turrets, along with a choice of red or green reticle illumination in 5 brightness settings. There is no CR2032 included with this scope. It also has a fast focus dial around the eyepiece with a throw lever for easy adjustments with gloves so you can get a clear view at various engagement ranges. With a Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube, this LPVO is ready to mount straight out of the box!

This scope has been tested with real steel firearms by the Novritsch team and it proved it was more than "just an airsoft scope". Being able to withstand the force and kickback of some real steel beasts. The video attached shows its capabilities

If you need mags for your SSR77, these are the ones! The Novritsch 180rnd Magazine for SSR77 AUG AEGs is constructed from translucent brown high density polymer with an olive green baseplate, just like real AUG mags. The mag holds 180 BBs loaded through the fill/feed port on the top using a speed loader or loading tool. 

Being a mid-cap magazine, you won't get any battle rattle from this mag despite its respectable 180-round capacity. Compatibility-wise, this mag should fit the majority of AUG AEGs on the market and is ideal for the super speedy Novritsch SSR77 range!

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

Whether your HOP-up rubber is worn out or you are seeking an upgrade, the Novritsch HOP-up Bucking for SSP1/SSP5 GBB pistol is one to keep an eye on. This HOP-up bucking is a big reason that Novritsch pistols have such incredible range, and being a VSR/GBB style HOP-up rubber, this should be compatible with most TM-based GBB pistol designs as well as the VSR-10 sniper rifle series.

If you're looking for a suppressor which departs from the norm with a futuristic profile, the Novritsch Rectangular Modular Suppressor V2 is the one. This CNC aluminium suppressor boasts an acoustic foam filling for effective sound dampening and can be reconfigured into 3 different lengths to suit any build objective. 

This version of the Modular Suppressor V2 mounts to either 14mm CCW male threaded outer barrels or 16mm CW threaded outer barrels depending on the variant you choose, meaning an easy fit on most AEG assault rifles and SMGs and a specific variant for MK23 and SSX23 NBBs. Its lightweight nature makes it ideal for GBB pistols with tilting barrels, and we recommend using the shortest configuration for the best possible gas efficiency. Included in the set are a pair of additional bolts, allowing you to use the suppressor at full-length (170mm), mid-length (110mm) and ultra-short (80mm) configurations. If you need a suppressor with a modern look to suit your cutting-edge build, the Novritsch Modular Suppressor V2 is ideal!