All Electric Parts

If you want tighter groupings and more range, you're not alone! Thankfully, Maple Leaf is here to make your AEG shoot like a laser beam with the OHM Silicone AEG HOP-Up Tensioner; Solid Edition. This HOP-up nub/tensioner is ideally paired with a Maple Leaf HOP-up bucking and like much-lauded "Flat HOP" nubs, is designed to provide a stronger HOP-up effect for heavy-weight BBs and to reduce side-to-side shot deviation, improving accuracy and range as long as you do your part.

The OHM Solid Edition is available in two different hardness degrees, 50° for standard FPS and BB weights and 80° for heavy BBs (0.32g+) and DMR FPS levels. The Solid Edition differs from the Hollow Edition in its solid form which prevents the tensioner from deforming when used with heavy BBs travelling at high velocity. The inner surface of the OHM is also concave, making it the perfect pairing for Maple Leaf buckings with concave contact patches.

Whether you're working on a DMR build or accurising your primary AEG, the Maple Leaf OHM Silicone AEG HOP-Up Tensioner; Solid Edition will give you the performance you need!

If you want tighter groupings and more range, you're not alone! Thankfully, Maple Leaf is here to make your AEG shoot like a laser beam with the OHM Silicone AEG HOP-Up Tensioner; Solid Edition. This HOP-up nub/tensioner is ideally paired with a Maple Leaf HOP-up bucking and like much-lauded "Flat HOP" nubs, is designed to provide a stronger HOP-up effect for heavy-weight BBs and to reduce side-to-side shot deviation, improving accuracy and range as long as you do your part.

The OHM Solid Edition is available in two different hardness degrees, 50° for standard FPS and BB weights and 80° for heavy BBs (0.32g+) and DMR FPS levels. The Solid Edition differs from the Hollow Edition in its solid form which prevents the tensioner from deforming when used with heavy BBs travelling at high velocity. The inner surface of the OHM is also concave, making it the perfect pairing for Maple Leaf buckings with concave contact patches.

Whether you're working on a DMR build or accurising your primary AEG, the Maple Leaf OHM Silicone AEG HOP-Up Tensioner; Solid Edition will give you the performance you need!

A replacement unit for Version 2 Airsoft AEG Gearboxes. This unit is the perfect replacement for any worn or burnt out trigger mechanisms you have in your current Airsoft AEG. 

If you're looking for a sturdy upgrade to your AEG, the FPS Softair Piston Head O-Ring Seal is a worthy contender. Constructed from high-density rubber for a superior seal to increase the reliable and lifespan of your rifle. This O-ring is likely to improve your air consistency, which may result in increased accuracy and is compatible with most piston heads.

If your AEG shoots hard you may want some hard internal parts to secure its performance in the long term! The Laylax Hard Anti-Reversal Latch for V2/V3 Gearbox is constructed from hardened steel to cope with even the most ferocious build. The set includes the anti-reversal latch itself and the ARL spring and is compatible with all Airsoft AEGs which use the Version 2 or Version 3 gearbox type.

If you're the techy type and are seeking a smooth, buttery-sounding gearbox with maximum efficiency, helical gears must be on your shopping list! The Lonex Spiral Bevel Gear & Helical Pinion Gear for V2/3 Gearbox includes a pinion gear and bevel gear, both constructed from steel for maximum strength. The included pinion gear is an "O type", designed for O-type motor shafts and not compatible with D-type shafts. 

These gears differ from standard bevel and pinion gears in the angle of the teeth, cut in a helix shape and designed to increase torque and efficiency. This also means the gearbox report will be far quieter with these installed, though strong bushings are recommended for the bevel gear due to the increase in axial thrust force generated. Naturally, this set is ideally used by a techy skirmisher with the prerequisite knowledge needed to bring out the best performance and longevity from their setup. 

If you are looking for exceptional performance for your AEG, either for a high rate of fire build or a DMR running at higher than normal FPS reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is compatible with any AEG with a version 2 or version 3 gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

Upgrade your Lee Enfield with a superior cylinder. Tough and durable, the cylinder is specifically for the Lee Enfield S.M.L.E No. 1 MK III, with the cylinder set constructed from stainless steel and Teflon coated, to reduce piston friction. As a result the set can work with high-power springs. 

If you're working on a high-speed or high FPS gearbox, the FPS Softair Carbon Fibre Reinforced Tappet Plate for V3 Gearbox is essential. This hard-wearing tappet plate is constructed from carbon fibre-reinforced polymer, making it strong and flexible in equal measure. We've had superb results installing the Version 2 equivalent of this tappet plate in Bolster Armouries builds and if you seek similar performance we would wholeheartedly recommend this plate over others.

This Carbon Fibre Tappet Plate is compatible with any version 3 Airsoft gearbox, including those found in AUG, AR36, AK & S55x AEGs. Whether you're building a DMR or a beast of a high-speed setup, the FPS Softair Carbon Fibre Reinforced Tappet Plate for V3 Gearbox is the ideal upgrade to keep it feeding!

If you are planning to upgrade your Tokyo Marui NGRS system M4, this nozzle will be an asset to your build. The FPS Softair CNC ERGAL Air Seal Nozzle For TM NGRS M4/AR-15 is a vast improvement over the stock polymer air nozzle thanks to its highly robust CNC ERGAL (7075 aluminium alloy) construction and internal O-ring which should provide better air seal and a slight raise in FPS as a result.

The nozzle also comes with a pair of O-rings and has an anodised finish, providing a super smooth friction-free coating which will see your NGRS M4 working at peak efficiency.

If you are looking to upgrade your HOP unit, in most cases these days there isn't much to gain if you already have a rotary unit in your gun. This is the exception! Krytac has taken the rotary HOP unit and added in audible and tactile clicks when you adjust, locking the unit in its set position and allowing you to adjust accurately even in low light conditions! The unit also has engraved numerical setting indicators around the adjuster, allowing you to keep track of which setting works best with which BB weight, avoiding the trail and error! This package also includes a KRYTAC HOP rubber.

If you're running an SMG-5, M4/AR-15 or any other AEG which uses a version 2 gearbox, the GATE ASTER™ MOSFET will take your AEG to the next level. This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App. 

This is the MOSFET we use in our Bolster Tuned platforms due to its fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™ so if you're not confident, we suggest seeking a technician to carry out the installation process for you. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™!

If you want a 'FET on your AK but don't fancy chopping up your gearbox shell, the ARCTURUS Version 3 Gearbox Shell; MOSFET Ready will sort you out! This alloy V3 gearbox shell includes 8mm steel bushings pre-installed and is designed to accept the standard V3 trigger switch, a Perun Hybrid V3 MOSFET or a Gate TITAN V3 MOSFET, meaning no need to get the Dremel out!

Being a V3 shell, this is compatible with most AK, AUG, AR36 and SMG-5K AEGs but doesn't include any internals other than the bushings. The rear of the shell is cut for a quick change spring guide and we recommend sourcing one from ARCTURUS to guarantee compatibility. Whether you aren't a fan of using power tools or you simply CBA, the ARCTURUS Version 3 Gearbox Shell; MOSFET Ready will help bring your AK up to speed with the most advanced builds on the field!

If you're working on a gearbox build, FPS Softair 8mm Self Lubricating CNC Steel Bushings will give your build a long life of friction-free performance! Constructed from CNC machined steel, these 8mm solid bushings are compatible with any AEG gearbox which uses 8mm bushing/bearing holes. 

The advantage of solid bushings over ball-bearing bushings is their incredible strength, ideal for high-performance builds whether it's a DMR or DSG. If you're pushing the limits of Airsoft performance, FPS Softair 8mm Self Lubricating CNC Steel Bushings belong in your build!

If you have had a mishap and broken your selector plate, or you want something a bit stronger to reduce the likelihood of failure and reduce resistance at the same time the Laylax Hard Selector Plate is what you need. This selector plate is compatible with M4/AR15 AEGs and is constructed from hardened polymer to reduce flex and improve strength. This is a conventional selector plate designed for standard trigger contacts and will not work with optical MOSFETs without modification.

If you have broken your APS UAR trigger with some heavy fingered action we have the solution! The APS Trigger for UAR AEG is a replacement part for the UAR AEG and includes the trigger itself, trigger axis pin and trigger spring. 

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable for Tokyo Marui NGRS or version 9 gearbox. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

If you feel the need for speed, the EG Hard Gear Set 13:1 Ratio for Version 2/3 Gearbox from Laylax will give you just that! The renowned Laylax/Prometheus EG Hard Gear series boasts over a decade of service, crafted with precision through Japanese machining, heat treatment, and forging techniques that adhere to the highest standards. This meticulous manufacturing ensures a notably quieter gear mesh sound, even under higher FPS and fire rate conditions.

These are 13:1 high-speed gears, improving rate of fire and trigger response by cycling the gearbox once every 13 motor revolutions as opposed to the standard once per 18 revolutions. This means you can boost rate of fire without upgrading your motor, though like any other replacement gearsets, these will require expertise to install. If you already upgraded your motor, wiring and added a MOSFET and you still want more speed, this gearset will do the trick. 

If you are looking for a replacement piston for your Real Sword or CM.057 variant SVD, then CYMA has come to the rescue! The CYMA SVD/SVU Piston and Head Set includes the piston itself, a piston head and a piston head O-ring. The piston has a full 18-tooth rack of steel teeth, improving strength while keeping overall weight manageable, making it great for high-performance SVD builds.

The piston is constructed from durable polymer and the piston head from CNC anodised aluminium. The piston head features vents to improve tightness and has a rubber pad to help absorb the shock from impact when the platform is fired. The piston head also has a bearing within it to improve the spring action of your SVD replica.

The set is designed exclusively for the Real Sword or Cyma variants of the SVD and is NOT compatible with other brands' SVD platforms.

If you are tuning your gearbox for a high rate of fire build a reinforced tappet plate is a must for your shopping list. The Perfect Tappet Plate from Laylax replaces your original tappet plate to keep your Tokyo Marui NGRS AEG running for longer at high speed thanks to its reinforced polymer construction.

Turn your AEG into a TITAN with Gate's new flagship electric trigger unit (ETU), the TITAN II Bluetooth for Rear Wired V2 Gearbox with Basic Firmware.

Built-in Bluetooth 5.2 technology gives you direct access to the TITAN's settings on the fly, using AEG telemetry to allow you to use your smartwatch, STATUS and other future devices in the Gate ecosystem of devices.

The innovative gear sensor not only counts each tooth but also as the first in the world determines the direction of a gear's rotation, offering you the most precise of cycle controls in AEGs.

With mind-blowing optical trigger sensor, the TITAN II allows you  to set your hair trigger with ludicrous precision, with a whopping 50 sensitivity levels for the first millimetre of trigger movement.

The TITAN II is equipped with a multifunctional port ready for connecting additional accessories such as bolt-catch, magazine sensor, tracer in hop-up chamber and others.

A replacement Pinion Gear designed to replace broken, damaged and worn Pinion Gear on Airsoft AEG Motors with Type-D Shaft. 

If your CYMA MOSFET has met its end, or you want a cheap and cheerful upgrade, the CYMA MOSFET for V2 Gearbox is ideal. This MOSFET is a replacement original part for the CYMA Platinum AEG series and should work with any AEG which uses a version 2 gearbox. When installed, this MOSFET should improve trigger response and rate of fire, along with eliminating the chances of your trigger contacts becoming corroded. 

The MOSFET is pre-wired with two sets of spade connectors and you can choose between rear-wired and front-wired configurations. Please note, certain gearboxes will need modification to install this MOSFET/ETU unless they already have a slot in the shell designed for an electronic trigger. We only recommend this part for experienced users! 

If you are building an Airsoft DMR this enhanced HOP-up rubber set from Laylax Prometheus should be on your shopping list! Laylax Prometheus has a fantastic reputation for enhanced HOP-up buckings, providing the Purple bucking used in the Bolster Armouries ONYX AEG series thanks to Prommy's wealth of experience and pedigree. We love them, and we think you will too!

This bucking is designed for builds shooting at 350-400 FPS, putting it right in the sweet spot for DMRs. When installed, this set should improve range, enhance air seal and allow for heavier weights of ammo to be used. Compatibility-wise, this should fit the vast majority of Airsoft AEGs which use the standard TM AEG style HOP-up bucking/rubber and nub, which is almost all of them!

Are you having HOP-up troubles with your ARCTURUS AK platforms? This is exactly what you need! This HOP-up chamber is a complete replacement part and comes with the necessary pieces for installation. The main chamber is made from a sturdy plastic polymer and is compatible with ARCTURUS AK AEGs which have V3 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

We only recommend installing this HOP-up unit if you are confident in your abilities, some parts are small and installation must be precise.

Fix your AK replica's damaged HOP-up with the ARCTURUS Rotary Hop-Up Chamber For ARCTURUS AKs and you will have your replica shooting prime and proper in no time!

If you are looking to up the performance of your AEG and take it to the next level, Maple Leaf has got what you need. This 6.02mm Tightbore inner barrel is constructed from stainless steel and features a flawless internal finish for perfect shots every time. The 6.02mm is one of the tightest possible inner barrels that can be installed to get the most potential from your rifle and increase your FPS and accuracy to stay ahead of the competition.

The barrel measures 370mm and can be any rifle with an AEG-compatible HOP up, for those of you wanting to improve your rifle's air seal and overall efficiency. With the barrel being so tight, make sure to keep it clean for maximum performance.

A drop in MOSFET Kit designed for Version 3 Gearbox, which are typically seen in AK and RPK Variant Rifles.

If you are worried about trapping your wiring when inserting a magazine or reinstalling your MCX handguard, Laylax has once again come up with a solution! The Wire Guard for MCX AEG is designed to mount to the gearbox shell and keep your wires well out of the way of any snags or potential damage from inserting magazines or removing/reinstalling the handguard. If you want to get ahead of one of the known problem areas of the MCX and save yourself some hassle down the line this affordable upgrade could save you time and money!

If you're running an M4 AEG and seeking a cylinder head upgrade, the SHS V2 Cylinder Head for M4/AR-15 AEGs is a fantastic affordable option. Equipped with two O-rings around is circumference to close any gaps between your cylinder and the head, this cylinder head is compatible with any version 2 gearbox equipped M4 AEG.

The cylinder head body is constructed from CNC-machined aluminium and features a rubber dampening pad on the rear designed to reduce gearbox noise by cushioning the impacts of your piston head. If you're looking to enhance air seal or build a version 2 gearbox from scratch, the SHS V2 Cylinder Head for M4/AR-15 AEGs will suit you perfectly!

If you're in search of a cylinder for a version 2 or version 3 gearbox, CYMA has what you need! The Type 2 Ported Cylinder for V2 & V3 Gearbox is CNC machined from steel and boasts a polished inner surface for reduced friction. Being a "Type 2" cylinder, this cylinder includes a port to bleed off excess air, ideally used with inner barrels between 270mm and 430mm in length. Compatibility-wise, this cylinder fits version 2 and version 3 gearboxes and as always, we only recommend internal parts for those who are confident working on AEG internals.