FN Herstal Airsoft Replicas

Following in the footsteps of the Krytac Kriss Vector Alpine Edition we are proud to introduce the Krytac EMG P90; Alpine Special Edition. This unique P90 variant has an eye-catching new look and brings plenty of modern functionality to the table as a bonus thanks to its redesigned modular upper receiver/optics bridge assembly. As with the original Krytac P90, this variant boasts full licencing from FN Herstal via Cybergun, but unlike the original, this P90 takes a walk on the wild side when it comes to external design!

Inside we are treated to the best the P90 platform has to offer, just like the previous P90 from Krytac. The trigger has been enhanced and now has a super short trigger travel with full adjustability, the upgraded internals are kept in check by the Krytac Nautilus MOSFET and a 30K RPM high torque motor delivers the power needed to provide a super snappy trigger response and a remarkable rate of fire. If you like your P90s minty fresh on the outside and a cold killer on the inside, this one should suit you!

The Novritsch SSR90 is a radical reinvention of the P90 PDW concept, bringing this ageing spacegun into the 21st century with a significant external overhaul and the usual Novritsch compliment of pre-upgraded internals. 

With a new M-LOK upper receiver, skeletonised trigger, QD sling points and a newly designed rubberised butt plate, the SSR90 has far more attachment interfaces than the original P90, better handling and a far shorter trigger pull, ideal for CQB bouts. The body is made from fantastic quality reinforced polymer and to make matters even sweeter, the SSR90 can be kitted out with Novritsch Rail Extension for even more accessory space or the Minimal Receiver Conversion for an even more unique aesthetic. 

What is sure to turn heads is its phenomenal performance, particularly in terms of rate of fire and long range accuracy. This thing hits 17 rounds per second on a 7.4V LiPo battery, which is outlandish, to say the least. With a Maple Leaf HOP-up rubber and a newly designed TDC HOP-up unit, a 6.03mm tight bore inner barrel and a programmable ETU/MOSFET control unit, the Novritsch SSR90 FN Herstal P90 AEG Submachine Gun sure means business when it comes to performance!

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

If you're looking for a top-tier SCAR replica and realism is your priority, you'll love the Cybergun FN Herstal SCAR-H CQC AEG! This full metal SCAR-H replica is flawlessly made, with some of the sharpest machining we've ever seen paired with superb quality polymer parts in all the right places. The outer barrel and muzzle device are also steel, giving this SCAR-H realistic weight distribution, perfect for the skirmisher who wants the most realistic experience in game.

Internally, the SCAR-H is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If a SCAR-H will be your next buy and you want the best externals out there, the Cybergun FN Herstal SCAR-H CQC AEG is ideal!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK16 SCAR-L replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-L. Externally, this SCAR-L is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-L into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET will do the trick!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK16 SCAR-L replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-L. Externally, this SCAR-L is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-L into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-L AEG w/ EFCS MOSFET will do the trick!

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

The Cybergun FN Herstal Vertical Picatinny Grip is a slightly angled vertical foregrip designed to stiffen up your grip and aid in improved accuracy down range. The grip latches onto a 20mm RIS/RAS rail section and then tightens together with an Alenn key. Once installed, it sits sturdy! The bottom of the grip has a latch base that can be opened by pushing in the tab, perfect for you to store batteries or tactical snacks. The whole unit is manufactured from a very strong polymer and an alloy bolt for fixing to your Airsoft rifle.

The front and rear faces are also textured in a stripy pattern for added grip. It also features an FN Herstal trademark on the bottom of the foregrip which looks amazing, it's just a shame it's hidden away underneath the grip. There is a choice of the iconic SCAR tan colour or a tactical black coloured foregrip.

A spare or replacement Gas Magazine for the Cyber Gun FN Five Seven (5-7), which holds a total of 17 rounds and is constructed to the exact same standard as the original magazine, using Alloy for the body and Polymer for the feed lips.

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb!

If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.

This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb!

A spare or replacement magazine for the Cyber Gun FNX-45 Tactical, which offers a choice of either Black or Tan Baseplate to match your Pistol. It is filled with BBs using a Speedloader to feed them through the Polymer Feed Lips, and filled with Gas via the Inlet Valve on the back of the Magazine. If you own a Cyber Gun FNX-45 and want to stay in the fight longer without having to retreat, then you need some spare Magazines.

If you're searching for your dream DMR base gun and that happens to be a SCAR, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is just what you need! This is the king of SCARs, known as the SCAR-H TPR (Tactical Precision Rifle) or MK.20 SSR (Sniper Support Rifle), designed as a designated marksman's rifle variant of the MK.17/SCAR-H. 

The SCAR-H TPR differs from its smaller sibling in its longer receiver with lengthened accessory rails and multi-adjustable sniper-style stock with 8 cheek riser positions, 10 length of pull positions and a 20mm Picatinny monopod rail. The Cybergun replica carries over all of these iconic TPR features, along with a full metal build, licenced FN Hertal trademarks and the Ares EFCS programmable gearbox with low resistance wiring and a Deans/T-Plug battery connector. 

If your DMR needs dictate a realistic base gun which stands out from all the AR platforms, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is one to watch. We like to think of this as the PSG-1 of the 21st century, marrying the slick SCAR looks with beastly DMR proportions!

If you're searching for your dream DMR base gun and that happens to be a SCAR, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is just what you need! This is the king of SCARs, known as the SCAR-H TPR (Tactical Precision Rifle) or MK.20 SSR (Sniper Support Rifle), designed as a designated marksman's rifle variant of the MK.17/SCAR-H. 

The SCAR-H TPR differs from its smaller sibling in its longer receiver with lengthened accessory rails and multi-adjustable sniper-style stock with 8 cheek riser positions, 10 length of pull positions and a 20mm Picatinny monopod rail. The Cybergun replica carries over all of these iconic TPR features, along with a full metal build, licenced FN Hertal trademarks and the Ares EFCS programmable gearbox with low resistance wiring and a Deans/T-Plug battery connector. 

If your DMR needs dictate a realistic base gun which stands out from all the AR platforms, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is one to watch. We like to think of this as the PSG-1 of the 21st century, marrying the slick SCAR looks with beastly DMR proportions!

Whether you are a sniper looking for a compact AEG backup or want something short and light to take advantage of your agility, the Cybergun P90 is perfect for the job. This AEG boasts full metal construction, realistic trademarks licenced by FN Herstal itself and ambidextrous controls, perfect for left-handed shooters or those who like to shoot from both shoulders to make the best use of cover.

The internals are based around the TM P90 design, meaning a version 6 gearbox, rotary HOP-up unit and full compatibility with aftermarket upgrades for the TM P90. Also fitted are a 6.03mm tightbore inner barrel for an improvement in accuracy potential and 8mm bushings for a smoother gearbox report and a slight increase in rate of fire. If you like to move fast and crawl in the woods, the P90 is your best friend!

There has been a lot of fuss made about this particular AEG online, and let us tell you, the hype is real! The Krytac P90 AEG combines the P90s radical design with Krytac's industry expertise to produce the best performing P90 out there, with an unrivalled feature set and bomb-proof internals.

If you like your light machineguns to be...light, the Cybergun FN Herstal MINIMI® M249 PARA AEG; ETU Version fits the bill. This M249 MINIMI® LMG replica boasts official licencing from FN Herstal and is constructed primarily from high-density polymer to keep you agile in game.

This is the latest version of Cybergun's M249 AEG and is equipped internally with a version 2 gearbox with an in-line ETU/MOSFET to improve trigger response and rate of fire, a rotary HOP-up unit and 6.03mm tightbore inner barrel. Externally, this beast is based on the latest version of the M249 MINIMI®, rocking a 20mm Picatinny railed lower handguard and receiver, ready for modern optical sights, laser aiming modules, grips and bipods. If you like to move fast with a big gun, the Cybergun FN Herstal MINIMI® M249 PARA AEG; ETU Version is your ideal primary!

Whether you are building up a British Army LMG gunner loadout or you just want to increase your in game firepower, the Cybergun M249 SAW PARA would be a fine choice. The M249 PARA, also known as the L110A1 Minimi, was designed to provide a man portable light machine gun optimised for airborne troops and mechanised infantry, boasting a collapsible stock and shortened barrel to facilitate this.

This M249 is Cybergun's polymer receiver variant, meaning reduced weight with absolutely no compromises regarding performance. Like its far heavier full metal relative, the M249 PARA polymer version boasts the volume of fire optimised V249 gearbox which is reinforced and absolutely up to the task of sending out long bursts to dominate any outdoor skirmish environment. Complete with a steel bipod, 2400rnd electric auto-winding box magazine and quick detachable barrel, the M249 PARA is perfect for a more portable LMG solution!

If you're getting bored of the usual M4-shaped AEGs, who can blame you? The Cybergun FN Herstal MK16 SCAR-L 14.5-Inch AEG makes a nice change, boasting full metal construction and licenced trademarks from FN Herstal. Like the real thing, this detailed SCAR replica features ambidextrous fire controls, a monolithic upper receiver made from a single block of aluminium and an advanced multi-adjustable stock offering length of pull adjustment, an adjustable cheek riser and side folding functionality. Make no mistake, this is one of the best SCAR replicas out there when it comes to external quality!

Internally, the SCAR-L is based around VFC's version 2 gearbox, a modified design to allow for ambidextrous selector levers. Inside, we have 18:1 ratio steel gears running on 8mm ball-bearing bushings, reducing friction when compared to solid bushings for a smoother gearbox report when fired. The inner barrel is also a 6.04mm tightbore example, giving the FPS a slight boost thanks to improved air efficiency and improving accuracy potential with high-quality ammo. If you're dreaming of a beast of a SCAR build and want the best externals around, start with the Cybergun FN Herstal MK16 SCAR-L 14.5-Inch AEG!

If you want to mount a Swiss Arms barrel extension/silencer to your Cybergun FNX-45 GBB this is the part you need. This adapter is constructed from aluminium and fits 16mm CW male threaded outer barrels, allowing for a Swiss Arms barrel extension/silencer to be mounted to your FNX-45 Tactical or MK23 pistol.

If you like compact Airsoft platforms with beastly recoil but aren't a fan of gas, the Cybergun FN Herstal SCAR®-SC BRSS AEG should be right up your street. Boasting full metal construction and enormous heft considering its size, the Cybergun SCAR®-SC is officially licenced by FN Herstal and is manufactured by Bolt, meaning you get ferocious, shoulder-thumping recoil each time you squeeze that trigger!

Bolt is known for its hard recoiling AEG platforms and the SCAR®-SC is no different, though it makes use of a CNC machined aluminium upper receiver like its bigger SCAR siblings which means more strength to cope with a lifetime of intense shooter feedback. As with the bigger SCARs, the SC boasts ambidextrous fire controls, 20mm Picatinny rails all over the show and plenty of sling points so you can set it up for either left or right-handed use. If you're seeking a compact rifle platform but are sick and tired of seeing PDW M4s, the Cybergun FN Herstal SCAR®-SC BRSS AEG should make you smile!

If you have a Krytac P90 AEG why not feed it with the best magazines money can buy? The Krytac P90 magazine is loaded (pun intended) with features which make it just that bit better than standard P90 magazines. Featuring adjustable capacity, from a realistic 50 rounds for Milsims or 200 rounds for spraying and praying, and a stop firing on empty function, there is no better way to feed the latest and greatest P90 AEG out there!