Airsoft Foregrips

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

The CQB Front Grip from Big Dragon is designed to provide increased weapon control for those who prefer not to use vertical foregrips. This grip enables modern shooting grips such as the C-Clamp and gives the user a low profile, snag-free solution which assists rapid transitioning from target to target.

Add a foregrip your rifle for maximum control. The grip is secured tightly onto rails by first sliding it on then screwing the bottom until it is locked in place. The grip can be placed anywhere up and down a Quad Rail, and is designed to allow the user to chose where the additional control point on their weapon is placed. The further forward the grip is placed the slower the barrel will turn, and the further back the grip is placed the faster the barrel will turn. This is the perfect purchase for those Airsofters who want to add a bit of flair to their weapon, or want a grip on the front of their weapon.

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you. 

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

If you are rocking a super shorty M-LOK railed AEG you may find that you cannot fit a foregrip and hand stop on your rifle. Having been in that situation I can tell you, it is annoying. Finally, a solution! The Cyma M-LOK foregrip with integral hand stop not only gives you the functionality of a double-duty M-LOK accessory but also makes your AEG look a bit like an SMG-5K! What's not to love? Modern functionality with classic design aesthetics, the best of both worlds!

A Vertical Foregrip designed to be attached onto the Front Handguard of Rifles and Submachine Guns to give the user a more stable grip on the weapon. 

This foregrip has more to it than meets the eye, it features a secret battery compartment for storing an extra accessory battery, or two. It attaches to the common 20mm Picatinny rails, found on most rifles. To mount the grip, unscrew the bottom, slide it onto your rail, align the hole in the side of the grip with a notch on your rail and tighten the base back down, securing the grip in place.

The is an additional cap on the bottom turret that can be removed using a flat head screwdriver. Once this cap is removed it reveals a 10cm deep cavern that can house common batteries such as AAAs or CR123As. This is a unique feature for a foregrip and further maximises the foregrips use as both a comfortable grip and a small storage container.

If you want to add a grip to your railed AK platform but want to keep it Russian, this is the grip you need! The 5KU Aluminium Russian Compact Foregrip; 20mm Picatinny is constructed from aluminium with a ribbed external design to improve handling and add traction. Inside the grip, we are also treated to a storage compartment designed for CR123a batteries, though you can store other items inside (we use ours for sweets). 

This grip is based on the popular Zco-style vertical grip often seen on styled-up AK platforms with other Zco furniture. If you want to add modern attachments to your railed AK but want to keep it purely Russian, this grip belongs on your gat!

A RIS mounted folding foregrip which is textured to provide excellent grip, and folds away compactly when not needed.

A Streamlined low profile 20mm RIS Vertical Foregrip with Internal Storage space. Designed by PTS to be the ultimate Dynamic tactical grip, the EPF2- (Enhanced Polymer Foregrip 2) is a revision of PTSs original and highly successful EPF grip, both of which are High-Speed / Low-Drag design, designed to avoid snagging on other equipment or clothing.

This Russian style vertical grip is for those of you that like to hold your rifle the easy way for better stability. The grip features ridged extrusions on the front and back for additional friction and grip, so your hands won't slip.

Constructed from high density polymer, this grip can be mounted to any 20mm Picatinny railed surface, but works best when mounted to a 6 o'clock rail, unless you have an unconventional style! Loosened and tightened by the side nub/bolt to secure in place.

If you've only got pocket change but want a vertical grip, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is ideal. This ultra-affordable vertical foregrip is styled after the real steel KAC VFG, the iconic design used on US Army M4A1 rifles and G36K platforms used by German KSK. This VFG mounts to any 20mm Picatinny rail and is very easy to mount, requiring not a single tool! 

To mount the grip, unscrew the base, slide it onto your rail, align the hole in the side of the grip with a notch on your rail and tighten the base back down, securing the grip in place. If you're looking for a cost-effective ergonomic enhancement for your 20mm Picatinny rail-equipped platform, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is the one to go for!