Novritsch Accessories

If you're running an upgraded Sniper Rifle or one of Novritsch's fantastic pre-upgraded platforms, the Novritsch 0.43g Sniper BBs will help you get the most out of your setup. Supplied in a resealable bottle of 530 rounds with an O-ring sealed top, even the bottle of these BBs is designed to give you the best possible accuracy by keeping dirt and debris out and your BBs clean and ready (even as you are clean and ready!). 

Ideal for platforms with upgraded HOP-up parts like the SSG96, SSG10 series and SSR63 A3, Novritsch's BBs boast tight tolerances and a finely polished surface for maximum accuracy. Feed your sniper rifle with the ammo it deserves

If you're looking for a sneaky suppressor with a quick detach design, the Novritsch Fast Attach Suppressor System is for you! This package consists of a steel flash hider and an aluminium suppressor. They are designed to work with one another to create a fast attach system so you can quickly equip or unequip your suppressor depending on the situation you find yourself in whilst out on the battlefield.

The suppressor features internal foam and cavities designed to baffle and reduce the noise of excess air or gas from your Airsoft replica. Both products are constructed from durable materials, designed to survive the rigors of a tough skirmish. As well as being hard-wearing, they have also been crafted with exceptional aesthetics, the flash hider silhouettes real steel variants and the suppressor boasts a sporty fluted design that is sure to catch the eyes of your fellow skirmishers.

If you're ready to take your operations clandestine, there is no better way than with the Novritsch Fast Attach Suppressor System. Stealth and style are both important for the battlefield, and with this suppressor system, you get both in one!

If you are looking for a sneaky aesthetic and reduced muzzle report, the Novritsch Rifle Suppressor will give you just that! This suppressor is constructed from aluminium and has internal baffles made from acoustic foam which will reduce the muzzle report of your primary and make you harder to locate.

The Novritsch Rifle Suppressor is compatible with any Airsoft gun which uses 14mm CCW male barrel threading and has an aggressive ported front end, providing some visual interest to the design which marks it out as something a bit different from the usual, boring tube suppressors.

On the inside, Novritsch has gone above and beyond, using 2 different sized baffles to muffle the muzzle report, widening at the end to prevent BBs from shattering inside and ruining that perfect shot. The front cap can also be removed, so if you want to change the filling to your own secret suppression formula, you are free to do so. Whether you are taking your sniper rifle build in a sneaky direction or you are creating an assault rifle with an emphasis on stealth, the Novritsch Rifle Suppressor is the perfect finishing touch!

If you're running the incredibly swift SSR9 AEG from Novritsch, you'll need loads of these to keep it fed! The Novritsch 120rnd Magazine for SSR9 AEG is constructed from high density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The slim design of these magazines allows you to carry plenty, and it goes without saying, you'll need a lot of these mags to keep up with the SSR9 DSG's insane rate of fire!

The Novritsch Maintenance Kit Gen2 is a must-have piece for any Airsoft enthusiast. This kit contains all the necessities for keeping your Airsoft guns in pristine condition, both cosmetically and functionally. Keeping your guns well maintained will give you the competitive edge over other skirmishers and keeping your gear clean is a must to minimise any potential damage from dirt and grim, ensure victory and the longevity of your Airsoft replicas with the Novritsch Maintenance Kit Gen2. 

Novritsch has not missed a beat with this maintenance kit, it contains lubricating oils and grease, cleaning alcohol and wipes, a cleaning rod with a ruler, nylon slotted tips and cotton mop brushes. All this is contained in a handy bag which has additional space for other tools or accessories that you deem crucial for looking after your favourite Airsoft guns. 

If you are treating yourself to the shiny new SSP18 GBB from Novritsch you will need some mags! The 24rnd Green Gas Magazine V1 is designed for the Novritsch SSP18 and will also fit most EU series GBB pistols. The magazine body is constructed from alloy with a polymer follower, polymer feed lips, a polymer baseplate, a steel feed spring and brass valves.

The fill valve is located on the base of the magazine and as with all Airsoft gas mags, the mag needs to be inverted to be filled with gas. Loading BBs can be done through the feed lips at the top, or by dragging the follower on the front down and loading through the widened channel at the bottom. A speed loader makes this much easier but isn't required. Being the V1 version, this mag is not compatible with the Novritsch CNC baseplates and uses a single-stage valve.

If you are running the SSP18 you will need a few of these to keep up with that fearsome full auto firemode!

The Novritsch 100rnd Magazine for P90/SSR90 Gen.2 AEGs is more transparent than other magazines allowing you to constantly monitor your remaining BBs so you don't get ambushed whilst having an empty magazine! Novritsch has also slightly tweaked this magazine design so it fits better into P90/SSR90 Gen.2 AEGs, giving you smoother reloads even in the heat of the moment, when the adrenaline is pumping! It is made from a strong polymer and sturdy steel feed spring making it a mighty fine magazine that will last you a long time. This magazine can hold approximately 100 BBs so you have plenty of shots available if you opt for semi-auto firing, but if you prefer full spraying, this large magazine will surely have enough BBs in it so you can hit your target, or at least we would hope so...

The Novritsch SSG10 Suppressor Adapter allows you to attach a suppressor to your Novritsch SSG10 outer barrel. It has a 28mm CCW threading on one side and a 14mm CCW threading on the other side, allowing you to attach the most readily available muzzle devices to your SSG10. You can make your SSG10 even more unique than it already comes!

The adapter has holes through its sides you can insert a tool to ensure the threading is securely attached. The threading is compatible with all Novritsch SSG10 barrels, no worrying about whether your specific SSG10 barrel will be compatible! The Novritsch SSG10 Suppressor Adapter opens your sniper rifle up to limitless muzzle customisation, create your unique look specifically tailored to your gameplay with this handy adaptor.

If you need mags for your Novritsch SSQ22 GBBR you have found them! These magazines are styled after real steel 10/22 25-round magazines and are constructed from high density polymer with alloy internals and a steel feed spring. The outer shell of the magazine boasts textured panels to make the mag easier to grip during a speedy reload, and each magazine holds 36 BBs.

Loading the magazine can be done in one of two ways; Either pull the follower on the front of the magazine down to the bottom and load with a speed loader through the loading port on the front, or use a GBB adapter with your speed loader and load through the feed lips at the top of the mag. The gas fill valve is located on the bottom of the mag, and as with all gas magazines, the mag needs to be inverted in order to fill it. These mags work well with the Novritsch SSQ22 but unfortunately are not compatible with the ASG/KJ Works KC-02. If you are planning on running Novritsch's sporty new 10/22 style carbine, a few of these is a must!

If you're in need of high performance, high accuracy BBs for your Airsoft Sniper Rifle then look no further! These Novritsch 0.46g 6mm biodegradable BBs come in a resealable bottle of 530 BBs and come pure white in colour.

BBs are a crucial factor when it comes to accuracy, a high quality BB can mean all the difference and Novritsch certainly doesn't disappoint. These BBs are second to none when it comes to long range engagements. The pure white colour allows you to track the full trajectory of the BBs no matter how far they travel. With Novritsch ensured quality control you can be sure you are getting only the most premium biodegradable BBs. The slick plastic bottle that these BBs are stored in allow for convenient transportation and also excellent compatibility with speedloaders.

If you want your SSP18 to stand out, the Novritsch SSP18 Compensator; 14mm CCW is what you need. This CNC Aluminium compensator boasts two ports at the top and swept-back fluting on each side, giving it a speedy look ideally suited to the SSP18 aesthetic. This comp is designed specifically for the SSP18 but mounts to its 14mm CCW male threaded barrel, meaning it can be used on other platforms but compatibility is not guaranteed. 

With numerous colour options available to suit any taste, the Novritsch SSP18 Compensator is a great way to customise your SSP18 and make it truly yours. Paired with Novritsch's magwell, outer barrel and other colourful CNC aluminium parts, you can turn your SSP18 into a unique beast and even use the comp to hide an extended 130mm inner barrel for more accuracy and muzzle energy. 

If you want your SSP18 to stand out, the Novritsch SSP18 Compensator; 14mm CCW is what you need. This CNC Aluminium compensator boasts two ports at the top and swept-back fluting on each side, giving it a speedy look ideally suited to the SSP18 aesthetic. This comp is designed specifically for the SSP18 but mounts to its 14mm CCW male threaded barrel, meaning it can be used on other platforms but compatibility is not guaranteed. 

With numerous colour options available to suit any taste, the Novritsch SSP18 Compensator is a great way to customise your SSP18 and make it truly yours. Paired with Novritsch's magwell, outer barrel and other colourful CNC aluminium parts, you can turn your SSP18 into a unique beast and even use the comp to hide an extended 130mm inner barrel for more accuracy and muzzle energy. 

If you want your SSP18 to stand out, the Novritsch SSP18 Compensator; 14mm CCW is what you need. This CNC Aluminium compensator boasts two ports at the top and swept-back fluting on each side, giving it a speedy look ideally suited to the SSP18 aesthetic. This comp is designed specifically for the SSP18 but mounts to its 14mm CCW male threaded barrel, meaning it can be used on other platforms but compatibility is not guaranteed. 

With numerous colour options available to suit any taste, the Novritsch SSP18 Compensator is a great way to customise your SSP18 and make it truly yours. Paired with Novritsch's magwell, outer barrel and other colourful CNC aluminium parts, you can turn your SSP18 into a unique beast and even use the comp to hide an extended 130mm inner barrel for more accuracy and muzzle energy. 

If you want your SSP18 to stand out, the Novritsch SSP18 Compensator; 14mm CCW is what you need. This CNC Aluminium compensator boasts two ports at the top and swept-back fluting on each side, giving it a speedy look ideally suited to the SSP18 aesthetic. This comp is designed specifically for the SSP18 but mounts to its 14mm CCW male threaded barrel, meaning it can be used on other platforms but compatibility is not guaranteed. 

With numerous colour options available to suit any taste, the Novritsch SSP18 Compensator is a great way to customise your SSP18 and make it truly yours. Paired with Novritsch's magwell, outer barrel and other colourful CNC aluminium parts, you can turn your SSP18 into a unique beast and even use the comp to hide an extended 130mm inner barrel for more accuracy and muzzle energy. 

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

The Novritsch Red Dot Premium – Micro V3 is compact and constructed from strong and lightweight CNC-machined aluminium. It offers 6 levels of brightness so you can line up your BB shots perfectly in any type of setting. The design is based on the Vector Optics Frenzy Sight but Novritsch has made some slight adjustments to make it better suited for Airsoft players.

The sight comes with a rubber cover to keep it well protected when it's not in use and also included in the package is the necessary tool to adjust the windage and the elevation. Plus a tool to mount the sight onto your Picatinny rail. All this premium sight needs is a CR2032 battery and it's ready for some serious skirmishing!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

The Novritsch SSP18 CNC TDC Outer Barrel is a great way to brighten up your SSP18 pistol! It comes in an array of colours and allows you to customise your pistol and make it unique to you. The outer barrel is constructed from CNC anodised aluminium, this creates an amazing finish and ensures that the product will be of the highest quality. This product is specifically designed for the Novritsch SSP18 and we can not guarantee fitment with any other Airsoft pistols.

The outer barrel features 14mm male CCW threading on the tip, this makes it ready for mounting most common muzzle devices. It also features a TDC screw so you can easily adjust your HOP-up without having to disassemble your pistol, all you need is a 1.5mm Hex-key!

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're planning to style up your SSP18 GBB, the Novritsch SSP18 Magwell Extension V2 is ideal. Constructed from CNC machined aluminium and available in a plethora of metallic colour options, the Magwell Extension V2 is even compatible with the Novritsch HPA Adapter for EU series/Glock GBB platforms.

Magwell extensions are a fantastic addition for those who value a speedy reload, designed to guide your magazine in and correct for any slight mistakes under pressure. The result is an easier, faster reload and the option for more skilful players to reload "eyes-up", i.e. while continuing to scan for targets without looking down at the pistol. From an aesthetic standpoint, the Magwell Extension V2 works well with the Novritsch Compensator, transforming the SSP18 into a menacing beast with the elite looks of stylish, high-end real steel race guns. 

If you're a talented skirmisher with skills to showcase, the Novritsch GoPro Adapter for 20mm Picatinny Rails should suit you perfectly. This CNC aluminium mount attaches to any 20mm Picatinny rail and provides a mount for GoPro-style action cameras with the socket mount. Please note, the barrel-mounted rail shown in the images is for demonstration purposes only and is not included with the set. 

The mount can be fitted to position the camera on the left or right side of your primary and only minimally affects the weight distribution and balance thanks to its lightweight aluminium build. If you have epic Airsoft moments to record for the ages, the Novritsch GoPro Adapter for 20mm Picatinny Rails is what you need!

If you want to save some weight on your AR36 or Novritsch SSR63 and give it a whole new look, you have found what you need! The Novritsch Minimal 20mm Picatinny Rail Kit for SSR63/AR36 AEG is constructed from alloy with steel mounting bolts and is compatible with the full range of Novritsch SSR63 AEGs as well as most AR36 AEG and GBBR platforms. The part is manufactured by Double Bell, includes built-in flip-up iron sights and is based on the real steel KAC design. 

The set provides a 20mm Picatinny top rail measuring approximately 10cm in length, enough for most red dot sights and smaller magnified scopes while minimising excess material to keep the weight low. The built-in flip-up iron sights are fully adjustable, with a single rear aperture which can be raised and lowered by turning the drum just below the aperture and adjusted left and right via the drum on the right side. If your AR36 needs a style up or you want to lean in to the light and tight design philosophy of the Novritsch SSR63, this kit is the perfect upgrade!

If you have the Novritsch SSR63 A2 or A3 and it is a bit long for your playstyle, this is what you need to shorten her up a bit! The Novritsch Short Conversion Kit for SSR63 A2/A3 AEG includes a "C" length outer barrel with 14mm CCW male threads at the tip, a 6.03mm tightbore inner barrel and a CNC aluminium M-LOK handguard with 20mm Picatinny rail sections in key locations. 

This set includes everything you need to transform your SSR63 A2 or A3 into the short configuration, shaving a few precious inches off the barrel so you can clear corners more effectively and have better mobility in CQB scenarios. Whether you want to hot-swap your SSR63 A2/A3 for the odd CQB game or you prefer a shorter primary to maximise aggression, this kit should suit you perfectly!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!