Bolster Tuned Airsoft Platforms

The sneaky counterpart to the Bolster Tuned CM.041 upgraded SMG-5 AEGs has returned and it's better than ever! Enter the CM.041 SD5 SMG-5 Upgraded Edition; a full metal SMG-5 SD5 replica built by the same team behind the ultra-high-end Bolster Armouries AEG series and previous Bolster Tuned AEGs.

As with its less discrete brethren, the first thing the Bolster Armouries team do with the CM.041 SD is to tear it to pieces and build it back up to fulfil its true potential. This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware.

The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Bucking was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused to increase the strength of the shell to withstand the force of repeated piston impacts, and the bearing holes in the gearbox shell have been smoothed out. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the Bolster Tuned CM.041 SD5 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 SD to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041 SD! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you're in search of a modernised Krinkov replica which is as much of a killer in-game as it is in looks, the Bolster Tuned CYMA CM.113B AKS-74U Zco Custom Upgraded AEG has your name on it! Based around the already impressive CM.113B Zco Custom, this beast has been refined by the talented techs of Bolster Armouries, furnished with some choice internal upgrades and tuned to get the absolute best out of the stock internal parts.

This new generation of Tuned AKS-74U is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the Kestrel Basic ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. Amongst its many advantages over the Kestrel Basic, you can add the Gate Blu-link to program the ASTER™ with its wealth of customisation options on your phone using Bluetooth!

The HOP-up has been enhanced with a 4UANTUM Friction Pro High-Performance Hop Up Bucking to extend the range out to 60 meters and beyond and to bring the trigger into line with modern AR AEGs, the Bolster Armouries AK Trigger Spacer has been fitted, shortening trigger travel to a hair for an incredible response rate in semi-auto. A Laylax Perfect Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and the sub-par stock piston head O-ring has been replaced with the Bolster Armouries Enhanced Piston Head O-ring to enhance air-seal qualities for minimal FPS deviation between shots. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected using the Bolster Armouries AOE Correction Washer, meaning 11.1V LiPo's are a go for the Tuned CM.113B, perfect for high rate of fire fiends!

While the original CM.113B is a very impressive shooter, the Bolster Boys have ushered forth its true potential in the Bolster Tuned version. If you're ready to dominate your next skirmish with a pre-upgraded piece which hits out to 60 meters with a spectacular rate of fire of 26 rounds per second, the Bolster Tuned CYMA CM.113B AKS-74U Zco Custom Upgraded AEG is ready for you!

If you love a bit of unique old-school cool, the Bolster Tuned CYMA CM.058 PP-19 Bizon SMG AEG should be in your sights! Based on the CYMA CM.058 Bizon, this rare Russian SMG replica is a sight to behold with its distinctive cylindrical magazine, side-folding skeleton stock and menacing trumpet flash hider, but inside, things get even better!

Like the more conventional Bolster Tuned CM.113 AKS-74U, the Bizon is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings and a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the copper trigger contacts, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. Amongst its many advantages over standard trigger contacts, you can add the Gate Blu-link to program the ASTER™ with its wealth of customisation options on your phone using Bluetooth!

The HOP-up has been enhanced with a Delta Armory BERSERKER Flat Hop-Up Bucking to extend the range out to 60 meters and beyond with astonishing accuracy. To give it the insane rare of fire Bolster Tuned AEGs are known for, the team fitted CYMA Platinum 13:1 CNC High-speed gears, and the result is an incredible 27 rounds per second. A Guarder Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and the sub-par stock piston head O-ring has been replaced with the Bolster Armouries Enhanced Piston Head O-Ring to enhance air-seal qualities for minimal FPS deviation between shots. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put into refining the mass-produced CYMA gearbox and making it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts. The bearing holes have also been smoothed out to reduce friction and prolong lifespan. The angle of engagement has also been corrected using the Bolster Armouries AOE Correction Washer, meaning 11.1V LiPo's are a go for the Tuned CM.058, precisely what a proper PP-19 Bizon replica needs!

A respectable AEG in its original form, the CM.058 really shines with some expert custom fitting and choice upgraded parts. If you always fancied running a perfectly tuned SMG with a head-turning look, the Bolster Tuned CYMA CM.058 PP-19 Bizon SMG AEG ticks all the boxes!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Buckingwas added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Buckingwas added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you dream of a beastly DMR build but don't want the hassle of building one yourself, the Bolster Tuned EMG Daniel Defense M4A1 RIII™ DMR Upgraded AEG is your best option! Based on the already impressive EMG Daniel Defense M4A1 RIII™ 14.5" AEG but ram-packed full of upgrade parts and tuned to absolute perfection, the Bolster Tuned M4A1 RIII™ is locked to semi-automatic and hits out at an impressive 410 FPS with a 0.2g BB, ready for DMR duty!

On the outside, the EMG M4A1 RIII™ is practically the perfect DMR base gun, with enough length for the DMR look paired with a light and agile RIS III M-LOK handguard, ergonomic Daniel Defense Buttstock and gorgeous licenced Daniel Defense trademarks. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for upgraded builds with high performance parameters.

Inside, you'll find a Gate ASTER™ MOSFET paired with the Gate QUANTUM™ CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan and an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding and the strength to handle the high power main spring.

To get your BBs way out there and onto target, a Laylax/Prometheus Purple HOP-up bucking paired with a Maple Leaf OMEGA nub was installed, giving you impressive accuracy for a high first-round-hit probability. The Warhead 35K Base Brushless Motor paired with an SHS Motor Pinion Gear and a Laylax EG 18:1 Hard Gear Set provides the durability, torque and heat dissipation qualities for peak efficiency, shocking trigger response and a long lifespan of reliable performance.

With a scary-fast trigger response, exceptional range and the ability to hit small targets out to 60 meters and beyond, this isn't just a high FPS platform locked to semi; each and every Bolster Tuned M4A1 RIII™ DMR is hand-assembled, tuned to perfection and put through rigorous testing on our 65m range. If it doesn't meet the Bolster standard, it doesn't leave the workbench until it does!

If you want a game-changer of a CQB platform, the Bolster Tuned EMG Daniel Defense DDM4® PDW Upgraded AEG is exactly that. Based on the already impressive EMG Daniel Defense DDM4® PDW SBR AEG, this officially licenced replica has been treated to internal tuning and upgrades by Bolster Armouries.

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings and a compact PDW sliding stock. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for high-speed builds.

Inside, you'll find a Gate ASTER MOSFET paired with the Gate QUANTUM CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan, an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding at insane rates of fire and the Warhead 27K Base Brushless Motor provides the speed this little PDW needs to shred anything else you may encounter in CQB.

If you've been searching for a real beast of a CQB platform with a cutting-edge aesthetic and performance to rival the best, the Bolster Tuned EMG Daniel Defense DDM4® PDW is the one. Hitting out to an impressive 60m with G&G 0.28g BBs with an astonishing rate of fire of 25RPS on an 11.1V battery, this bite-sized AR packs a full-sized punch!

If you want a game-changer of a CQB platform, the Bolster Tuned EMG Daniel Defense DDM4® PDW Upgraded AEG is exactly that. Based on the already impressive EMG Daniel Defense DDM4® PDW SBR AEG, this officially licenced replica has been treated to internal tuning and upgrades by Bolster Armouries.

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings and a compact PDW sliding stock. As part of the Bolster Tuned upgrade process, the original pistol grip has been swapped out for the popular PTS Syndicate EPG pistol grip, offering the improved strength of Dupont Zytel polymer and a motor engagement angle more suitable for high-speed builds.

Inside, you'll find a Gate ASTER MOSFET paired with the Gate QUANTUM CNC trigger, offering over 470 trigger sensitivity adjustment options along with the usual advanced ASTER features. The standard ball bearing bushings have been swapped out for Bolster Armouries EZO Bearings for a longer lifespan, an FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding at insane rates of fire and the Warhead 27K Base Brushless Motor provides the speed this little PDW needs to shred anything else you may encounter in CQB.

If you've been searching for a real beast of a CQB platform with a cutting-edge aesthetic and performance to rival the best, the Bolster Tuned EMG Daniel Defense DDM4® PDW is the one. Hitting out to an impressive 60m with G&G 0.28g BBs with an astonishing rate of fire of 25RPS on an 11.1V battery, this bite-sized AR packs a full-sized punch!

If you are a big fan of the SMG-5K but want to reach out and contend with the bigger AEGs, the Bolster Tuned CYMA CM.041L SMG-5K is the only one that can do it! This Upgraded AEG has been built and tuned by the expert technicians at Bolster Armouries and features the incredible Gate ASTER MOSFET, WarHead Brushless 27K Base Motor, 4UANTUM Friction Pro High-Performance Hop-Up Bucking, an extended 260mm 6.03mm tightbore inner barrel and an enhanced Type D cylinder from FPS Softair.

Not content with simply dropping parts in, the Bolster team has carried out a professional shim job, a complete gearbox rebuild, reapplication of high quality lubricants and a HOP-up unit modification to maximise efficiency and consistency. The result of this extensive tuning and parts replacements is an AEG we can confidently say will hit out to 60m + accurately with 0.28g BBs and rip off rounds at an astonishing 25 rounds per second with an 11.1V LiPo battery.

As with other Bolster Tuned/Patrol Base Custom platforms, if this high benchmark for performance is not met, the AEG goes back to the workbench for more work and won't be sold until it meets the teams' lofty standards. If you like the idea of using a tiny AEG and outranging all the big boys, the Bolster Tuned CYMA CM.041L SMG-5K Upgraded AEG is what you need to get the job done!

Introducing the Bolster Tuned TTI JW2 M4/AR-15, a professionally upgraded AEG platform based on the EMG TTI JW2, boasting many of the biggest names in aftermarket upgrade parts put together by the same talented techs that brought you Bolster Armouries. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

The Tuned JW2 builds upon the already impressive base platform and irons out all the creases, adding in a plethora of low friction, high strength enhancements to the gearbox itself. These include an FPS Softair O-ring equipped air nozzle and carbon fibre reinforced tappet plate, Bolster's own EZO bearings, M115 spring and stainless steel sector gear screws, a Laylax Hard Selector plate and the gorgeous Gate Quantum flat blade trigger.

The Quantum is paired with the incredibly advanced Gate ASTER MOSFET, offering 250 different trigger sensitivity settings, pre-cocking, programmable fire controls and much more via the Gate USB link or Gate Control Station app. To deliver the speed it needs to bury the original EMG CYMA Platinum JW2, the Bolster team saw fit to install the Warhead Base 27K Brushless motor, providing unparalleled heat dispersion qualities and speed to rival the very best.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock JW2 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. When we tested this AEG we were flabbergasted. 348 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 25 rounds per second using an 11.1V Lipo; more than enough to outshoot anything else you can buy off the shelf!

Introducing the Bolster Tuned Noveske N4 10.5" Gen.3 Shorty .300 BLK AEG Rifle, a professionally upgraded AEG platform based on the EMG N4 Shorty, boasting many of the biggest names in aftermarket upgrade parts put together by the same talented techs that brought you Bolster Armouries. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

The Tuned N4 Shorty builds upon the already impressive base platform and extracts the very best, removing anything that doesn't make the cut. Adding in a plethora of low friction, high strength enhancements including an FPS Softair O-ring equipped air nozzle and carbon fibre reinforced tappet plate, Bolster's own EZO bearings, M115 spring and stainless steel sector gear screws, a Laylax Hard Selector plate and the gorgeous Gate Quantum flat blade trigger; this N4 is kitted out to shred anything else it encounters on the field.

The Quantum is paired with the incredibly advanced Gate ASTER MOSFET, offering 250 different trigger sensitivity settings, pre-cocking, programmable fire controls and much more via the Gate USB link or Gate Control Station app. To deliver the speed it needs to bury the original EMG CYMA Platinum N4 Shorty, the Bolster team saw fit to install the Warhead Base 27K Brushless motor, providing unparalleled heat dispersion qualities and speed to rival the very best. While the original is quite impressive, the Bolster Tuned version is the next level up.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock N4 Shorty to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. When we tested this AEG we were amazed. 347 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 25 rounds per second; more than enough to outshoot anything else you can buy off the shelf!