EU Warehouse Stock

This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.

If you're looking for a low-profile, extremely comfortable lower face mask to protect your teeth, then this is the mask for you. A solid mesh mouth piece, combined with 2 padded wings to protect your cheeks, held in place by an anti-slip strap.

If you like to switch between your primary and sidearm in CQB a single-point bungee sling would be an asset to you! This sling attaches to a single point on your weapon via its steel hook attachment and can be quickly disconnected if need be thanks to its quick-release buckle which is shrouded by an elastic sleeve to prevent accidental releases. 

The sling is constructed from a combination of 1000D Polyester and elastic, with the elastic section providing a bit of extra flexibility so your agility isn't lost when you sling your primary. If you run a compact weapon up close and need somewhere for it to be when it is sidearm time, the 8Fields Single Point Bungee Sling is the ideal solution! 

A 1000D polyester constructed panel for Buckle Up systems, which offers MOLLE loops on the front two M4 magazine pouches, 2 flap closure pistol magazine pouches, and three M4 magazine pouches divided by elastic retainers at the rear. This is perfect for Buckle Up chest rigs, which allow you to quickly swap out your main pouches depending on the situation. The rear face of the panel is completely velcro which helps secure the pouch in place when connected to a Buckle Up system.

A 1000D polyester constructed panel for Buckle Up systems, which offers MOLLE loops on the front two M4 magazine pouches, 2 flap closure pistol magazine pouches, and three M4 magazine pouches divided by elastic retainers at the rear. This is perfect for Buckle Up chest rigs, which allow you to quickly swap out your main pouches depending on the situation. The rear face of the panel is completely velcro which helps secure the pouch in place when connected to a Buckle Up system.

A 1000D polyester constructed panel for Buckle Up systems, which offers MOLLE loops on the front two M4 magazine pouches, 2 flap closure pistol magazine pouches, and three M4 magazine pouches divided by elastic retainers at the rear. This is perfect for Buckle Up chest rigs, which allow you to quickly swap out your main pouches depending on the situation. The rear face of the panel is completely velcro which helps secure the pouch in place when connected to a Buckle Up system.

A 1000D polyester constructed panel for Buckle Up systems, which offers MOLLE loops on the front two M4 magazine pouches, 2 flap closure pistol magazine pouches, and three M4 magazine pouches divided by elastic retainers at the rear. This is perfect for Buckle Up chest rigs, which allow you to quickly swap out your main pouches depending on the situation. The rear face of the panel is completely velcro which helps secure the pouch in place when connected to a Buckle Up system.

A tough and affordable Red Dot Sight for Airsoft Guns that have a 20mm RIS/RAS Accessory Rail. Powered by a CR2032 Battery (included) this Sight offers a Red or Green Target Dot with five brightness levels, and is ready to install onto a Picatinny Rail via the integrated Rail Mount. If you're looking for the finishing touch to your Airsoft Gun and want to improve your target reaction times, then the Theta Optics Red Dot 1x40 Reflex Sight Replica is the perfect way to get started on the ladder of optics.

If you are looking for an affordable holster, 8Fields Tactical have just the thing! The 8Fields Tactical Drop Leg Holster is a basic but functional drop leg holster with a built in magazine pouch and can be added to any belt. When mounted the holster is positioned on the right side of the belt, making it ideal for right-handed users. If you want an affordable holster solution that fits most medium sized pistols, this is one of the best options!

If you are looking for an affordable holster, 8Fields Tactical have just the thing! The 8Fields Tactical Drop Leg Holster is a basic but functional drop leg holster with a built in magazine pouch and can be added to any belt. When mounted the holster is positioned on the right side of the belt, making it ideal for right-handed users. If you want an affordable holster solution that fits most medium sized pistols, this is one of the best options!

If you want to dress your AK up with some shiny western optics you'll need a 20mm rail adapter! Thankfully, CYMA has this covered with the 20mm Picatinny Railed Scope Mount For AK Side Rail, offering a quick detachable mount with a 20mm Picatinny rail of approximately 13.5cm in length. This mount fits the AK-style side rail found on most AK-74 and AK-10x series AEGs and is constructed from alloy to provide the strength necessary for a reliable zero.

The QD lever and mounting bolt are constructed from steel and can be adjusted by loosening or tightening the bolt, making it easy to get a rock solid and wobble-free mounting interface with the vast majority of AK-type side rails out there. If you want your AK to run the same snazzy accessories your M4 does this adapter is ideal!

A large Rifle Bag designed to carry up to two Rifles, with one Short, and one Long pocket, and an array of others allowing you to carry everything you need for a day's Skirmish. 

A large Rifle Bag designed to carry up to two Rifles, with one Short, and one Long pocket, and an array of others allowing you to carry everything you need for a day's Skirmish. 

If you need a light and tight AR PDW platform but nothing on the market currently scratches that itch, the Double Eagle M923G DEX556 may well be the one! This M4/AR-15 style AEG is constructed primarily from high density polymer with alloy and aluminium parts where needed and is packing the seriously slick Double Eagle FALCON EFCS MOSFET pre-installed for a frightening trigger response, 11.1V LiPo compatibility and a crazy rate of fire.

To deliver rounds accurately onto your unfortunate target, a 6.04mm tightbore inner barrel paired with a rotary HOP-up unit is fitted, giving you a head start over many M4/AR-15 AEGs in this price range with a raise in FPS and accuracy from the tightened bore and more effective HOP-up performance to extend your range. Whether you are in search of a new CQB primary or you like to fight light and aggressively outdoors, the Double Eagle DEX556 will see you well equipped!

If you need a light and tight AR PDW platform but nothing on the market currently scratches that itch, the Double Eagle M923G DEX556 may well be the one! This M4/AR-15 style AEG is constructed primarily from high density polymer with alloy and aluminium parts where needed and is packing the seriously slick Double Eagle FALCON EFCS MOSFET pre-installed for a frightening trigger response, 11.1V LiPo compatibility and a crazy rate of fire.

To deliver rounds accurately onto your unfortunate target, a 6.04mm tightbore inner barrel paired with a rotary HOP-up unit is fitted, giving you a head start over many M4/AR-15 AEGs in this price range with a raise in FPS and accuracy from the tightened bore and more effective HOP-up performance to extend your range. Whether you are in search of a new CQB primary or you like to fight light and aggressively outdoors, the Double Eagle DEX556 will see you well equipped!

A Polymer constructed Helmet which is shock-resistant and durable. It has an adjustable chin strap and comes included with adhesive internal padding to make it more comfortable/fit better at your control. The front of the Helmet features a slot for NVG/Wilcox Mounts, and the side rails come included with 20mm inserts for you to install compatible accessories to the sides of the helmet.

A Polymer constructed Helmet which is shock-resistant and durable. It has an adjustable chin strap and comes included with adhesive internal padding to make it more comfortable/fit better at your control. The front of the Helmet features a slot for NVG/Wilcox Mounts, and the side rails come included with 20mm inserts for you to install compatible accessories to the sides of the helmet.

A Polymer constructed Helmet which is shock-resistant and durable. It has an adjustable chin strap and comes included with adhesive internal padding to make it more comfortable/fit better at your control. The front of the Helmet features a slot for NVG/Wilcox Mounts, and the side rails come included with 20mm inserts for you to install compatible accessories to the sides of the helmet.

This versatile Grenade Pouch is able to fit many sizes of Grenades and other vital pieces of equipment, with it's elasticated design it can be stretched wide to accommodate what you require. The adjustable toggle allows you to adjust the amount of tension on the outside of the Pouch, so that you can have it super-loose or gripping your Grenade so hard it nearly detonates. The Pouch is MOLLE compatible and is mounted to compatible systems using the flap on the rear keeping your grenades close and the havoc closer!

This versatile Grenade Pouch is able to fit many sizes of Grenades and other vital pieces of equipment, with it's elasticated design it can be stretched wide to accommodate what you require. The adjustable toggle allows you to adjust the amount of tension on the outside of the Pouch, so that you can have it super-loose or gripping your Grenade so hard it nearly detonates. The Pouch is MOLLE compatible and is mounted to compatible systems using the flap on the rear keeping your grenades close and the havoc closer!

This versatile Grenade Pouch is able to fit many sizes of Grenades and other vital pieces of equipment, with it's elasticated design it can be stretched wide to accommodate what you require. The adjustable toggle allows you to adjust the amount of tension on the outside of the Pouch, so that you can have it super-loose or gripping your Grenade so hard it nearly detonates. The Pouch is MOLLE compatible and is mounted to compatible systems using the flap on the rear keeping your grenades close and the havoc closer!

This versatile Grenade Pouch is able to fit many sizes of Grenades and other vital pieces of equipment, with it's elasticated design it can be stretched wide to accommodate what you require. The adjustable toggle allows you to adjust the amount of tension on the outside of the Pouch, so that you can have it super-loose or gripping your Grenade so hard it nearly detonates. The Pouch is MOLLE compatible and is mounted to compatible systems using the flap on the rear keeping your grenades close and the havoc closer!

If you are running a fully equipped pistol you may find it is getting a bit too heavy to use in a belt holster, and in this case Amomax have you covered! The Drop-Leg Adapter is compatible with any Amomax polymer retention holster and mounts through your belt, with an additional elasticated nylon strap to help prevent the pistol from swinging around during dynamic movement.

A simple and easy-to-use Vertical Foregrip for Airsoft Replicas, compatible with 20mm RIS/RAS (Picatinny Rail Systems). To install the Grip, simply unscrew the base of the Grip and slide it over the 20mm Rail. Tightening the base of the Grip will raise the middle section of the Grip and lock it into a Rail Slot (if you've aligned it correctly). This will give you a comfortable platform to grip and brace your Airsoft Gun, making for steadier and more viable aiming, even in the heat of the moment.

If you need maximum carrying capacity to keep pace with your heavy trigger finger, the MOLLE Triple Stacker M4/AR-15 Magazine Pouch fits the bill. This combination pouch holds 6 x M4/AR-15 magazines in open-topped pouches with elastic bungee cord retainers to keep them secure. The bungee retainers can also be adjusted or removed entirely to allow for extended magazines, a tighter fit for more security or a looser fit for faster access. 

The pouch mounts to MOLLE webbing loops found on plate carriers, chest rigs and backpacks and is ideally mounted on the front centre but can be fitted wherever you have spare MOLLE space. Constructed from 1000D Nylon,  the Triple Stacker pouch provides ample strength to handle the rigours of Airsoft skirmishing with the added benefit of increased tear resistance thanks to its high stitch density.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a high cap variant, meaning that it can hold up to a massive 430 rounds. The magazine is filled at the top using a speedloader and loaded by winding the wheel at the bottom for super quick reloads to stay in the fight.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

A Polymer constructed Foregrip for 20mm Rails, which will easily attach to your Replica and provide a stable position to brace your gun against the shoulder, and achieve a steady and consistent aim. It could also reduce fatigue experienced during a skirmish from an incorrect hand position. The low-profile nature of this grip reduces the likelihood of snagging on your own kit/equipment during the day.

For all you CQB run and gunners looking for a way to store your Airsoft SMG mags, 8Fields Tactical has got you covered. Compatible with P90, UMP and SMG-5 Platforms, the pouch is belt mounted and fixed to the leg with straps so you've always got your mags to hand, secured in place with Velcro straps.

A one inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

A large rifle case designed for up to two Airsoft Weapons, and is fully adjustable to suit a range of weapon types. Strong and well built, its sure to keep your rifle safe while moving between your airsoft site and home.