EU Warehouse Stock

 A fully adjustable sling which can be used as either a 1 or 2 point sling depending on your preference or points of attachments used. The adjustable straps are constructed from 1000D polyester, as are the covers for the elasticated bungee straps. The sling is easily and quickly detached thanks to the polymer buckles, so you can quickly swap for when the situation of game changes.

The main method of attaching the sling to you rifle is by using the HK steel hooks, which are hidden behind elasticated nylon for extra protection.

If you want to glow up your EXF Bump Helmet with some helmet-mounted comms, here you go! The EARMOR M32H Electronic Communication Headset For EXF 2.0 Helmet is designed to mount to the Team Wendy EXFIL 2.0 Bump Helmet and its replicas, meaning greater comfort and ease of removal compared to the standard EARMOR M32.

The headset provides all the same functions the original M32 does, including active noise cancellation which reduces the volume of sudden, loud bangs and increases the volume of environmental noises, and communications functionality when combined with the EARMOR M52 PTT and a radio. This means that you will be able to hear the whispers of the enemy team in the next room but if a grenade comes around the corner your ears will be well protected, subject to nothing more than a dull thud. Even if you don't run comms, active noise cancellation is the ideal counter to grenades in tight spaces!

For those of you that need your shells as close as possible, ready for a quick reload. This holds up to 6 Airsoft shotgun shells and is constructed from water resistant 1000D Polyester is mounted to the buttstock of your shotgun of choice.

The straps are secured in place with Velcro and are adjustable to suit your piece, and the shells are held tightly in place with elasticated loops.

You can be sure when skirmishing that your spare shells are always within quick and easy reach for rapid reloads.

For those of you that need your shells as close as possible, ready for a quick reload. This holds up to 6 Airsoft shotgun shells and is constructed from water resistant 1000D Polyester is mounted to the buttstock of your shotgun of choice.

The straps are secured in place with Velcro and are adjustable to suit your piece, and the shells are held tightly in place with elasticated loops.

You can be sure when skirmishing that your spare shells are always within quick and easy reach for rapid reloads.

Pistol mag retention or rifle mag retention? Why not both?

With two stacked pockets in a low profile design, held together with elastic bungee retention cord, you can be sure that both your main and sidearm mags are kept safe and secure and to hand for quick reloads all in place!

The magazine pocket is designed for STANAG type mags in mind with the front most pistol pockets able to fit a whole range of pistol magazines such as EU17 or 1911 systems.

Mounted by MOLLE straps with push button studs, this pouch is for those of you that like to keep things compact and efficient, combining the best of both worlds for those speedy reloads in the heat of battle.

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A Gas Powered, Alloy Constructed Shotgun which will fire three or six BBs with each pump, loaded with Green Gas via the Inlet Valve on the Pistol Grip. It comes included with three Shotgun Shells and is the closest you can get to a Marui Gas Shotgun without spending £279+.

A low profile and simple sling which aims to reduce clutter on your rig, and to transfer the weight of your RIF onto your chest rig, rather than resting on your neck.

If you're worried about losing your RMR red dot to a BB impact, cast your concern aside and add this to your setup! The JJ Airsoft Kill Flash Lens Protector for RMR Red Dot Sights is designed to mount to the front of an RMR or RMR clone micro red dot sight and protect the lens from BB impacts along with reducing glare so your shiny objective lens doesn't give you away. 

If you want to protect your lens while keeping your setup looking realistic, this is the way to go! 

If you have invested in a Tokyo Marui VSR-10 Pro and you want to add an optic, this 20mm receiver rail will do the trick! The Slong Airsoft Receiver 20mm Rail Mount For VSR-10 Sniper Rifle is designed to replace the rear iron sight on the Tokyo Marui VSR-10 Pro sniper rifle but can also be used to replace a worn-out rail on VSR-10 clones or the TM VSR-10 G-Spec sniper rifle.

The rail is constructed from aluminium and finished with matt black anodising, keeping the surface coating thin to ensure the rail remains in spec and capable of mounting any optical sight which fits 20mm Picatinny rails.

If you need AR36 AEG mags, these should do the trick! The CYMA 150rnd Mid-Cap Magazine for AR36/SL8 AEG fits both AR36 and SL8/9 platform AEGs and is constructed from a translucent brown polymer, just like the real thing. Each magazine holds 150 BBs and can be loaded from the top using an Airsoft speed loader or loading tool.

The external design of the magazine matches that of the real rifle, including a reinforcement rib on the front and an over-insertion preventing ledge, meaning even if you slap this magazine home quite hard, it won't damage your HOP-up unit. On each side of each mag, there are magazine linking lugs which can be used to connect two or more mags together, allowing for faster reloads "redi-mag" style and keeping a second magazine handy and allowing you to get back in the fight without having to fumble with pouches.

If you have an SMG-5 and have caught straight mag fever no need to fret, we have the cure! The CYMA 120rnd Straight Mid-Cap Magazine For SMG-5/CM.106 AEG will give your SMG-5 AEG a whole new look similar to the legendary MP5-10, the 10mm version of the iconic SMG we all know and love.

These magazines are constructed with a steel shell, polymer internals and a steel feed spring and can be loaded with a speedloader or loading rod through the fill/feed port on the top of the magazine body. Compatibility-wise, these mags should work in the vast majority of SMG-5 AEGs out there, the CYMA CM.106 AR-9 AEG and most SMG-5/MP5 HPA magazine adapters for pistols. If you need a new look and new mags for your SMG-5 you can now hit two targets with a single BB!

A lightweight LED Light Set suitable for providing close range Illumination or light for Airsoft. Constructed out of robust polymer and metal, this LED set is more than capable of taking bumps and knock during combat. 

The absolute granddaddy of tactical backpacks with 40L of internal storage spread across five compartments, a further five exterior pockets and a total of 98 usable MOLLE loops. Every inch of this backpack is configured to maximise usable space, and you'll find that there is a pocket for every purpose.

If you're looking for a way to enhance your AK, AR36, AUG or SMG-5K AEG, the GATE ASTER™ SE V3 MOSFET; Expert Firmware is a fantastic option for a reasonable price! This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App.

This is the MOSFET we use in our Bolster Tuned platforms due to its fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™ so if you're not confident, we suggest seeking a technician to carry out the installation process for you. This, the V3 model, is intended for version 3 AEG gearboxes found in AK, AR36, AUG and SMG-5K AEGs. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™!

This Sawn Off Shotgun is constructed to an amazing standard using Alloy and Real Wood for the externals, with absolutely no wobbles, aside from the Pump Handle obviously which needs some motion to work properly. It has an internal Gas Reservoir that can be filled up at any time, and accepts standard Airsoft Shotgun Shells just like the TM870 series.

A Red Dot Sight for Airsoft Guns, that attaches to 20mm RIS/RAS via the Integrated Mount built in to the unit. With Backup Ironsights, an adjustable Red/Green Crosshair and tough Aluminium construction, this is a great Sight for a new and old players alike.

Most commonly known as the Combat Master, this airsoft replica is an excellent replica of the sidearm of a man who takes the term operator to a whole new level! However somehow despite all odds against him he manages to survive every firefight and put a round through every man who ever got close. Nothing like a trusty tool!

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

A 320rnd High Capacity Magazine for the CM.099 VSS Vintorez AEG, filled with BBs by pouring them into the Fill Window at the top of the Mag. A Clockwork Winding Wheel is turned at the base of the Magazine to start feeding BBs through the mechanism, just like any other Hi-Cap.

If you are rocking the old school WW1 and WW2 support gun, the Browning Automatic Rifle, you are going to need more ammo to keep up with all the "walking fire" you will be doing! This 160rnd High-cap Magazine from S&T is designed for the S&T M1918 BAR AEG rifle and is constructed with a steel shell, polymer internals and a steel feed spring. This magazine is realistic in size, and external design, with reinforcing ribs running down each side of the steel shell and mock feed lips at the top of the magazine, concealing the feed port and the fill window below. This magazine is a wheel wound high-capacity mag, and the winding wheel is located on the base plate. The magazine can be filled using the fill window located at the top of the magazine, inset into the shell.

A 90cm single gun bag with waterproof lining, which can be worn as a rucksack and accepts the latest line of 'Buckle Up' pouches from 8Fields Tactical to really expand the carrying capacity of this Airsoft/Firearm case.

Wanting to get into Airsoft skirmishing and are a fan of the world renowned and iconic AK47? Look no further than the CM.028.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box.

Silicone oil is absolutely essential to have in order to keep your gas magazines healthy and their seals and gas routes fresh. Leda has made the application process as easy as can be, with an applicator tip and squeezy underside plunger.

This bottle contains 60ml of liquid silicone lubricant which can be applied to O-rings and gas routes in your GBB and its magazines and can also be used to add lubricant to CO2-powered guns which have a tendency to dry out over long durations.

For just a few quid you can save yourself countless amount of time and money on buying new magazines when the seals dry up, so what are you waiting for?

Staying hydrated whilst skirmishing is essential, just behind wearing your eye protection and decent footwear in importance. For shorter skirmishes, keeping your beverages in the safe zone may well be sufficient, but for longer operations, it is always wise to keep a source of water in your kit and keep topped up, particularly during summer! For those who don't like the additional weight of a hydration bladder, the 8Fields Tactical MOLLE Water Bottle Pouch provides a deep and secure pouch which can fit most 1L water bottles of a conventional shape, and may even fit slimmer 1.5L bottles.

This is an updated version of the Dummy PRC-152 we had in a while ago. This time around it has much nicer Polymers, a better look, tougher construction and the dummy battery can now be removed.

A Polymer gas blowback B9 replica, which has the best of both worlds in regards to good gas efficiency from a Polymer build, as well as some good weight in the hand thanks to metal reinforcement.

If you're all about your modern M4/AR-15 platforms, the Double Eagle M920A Aeroknox AX//15 AEG is certain to catch your eye. This full metal M4/AR-15 platform sidesteps convention with a unique receiver, handguard, muzzle brake and pistol grip based on designs from Aeroknox LLC of Texas, with official licencing of course!

In line with other recent Double Eagle releases, the AX//15 boasts the impressive FALCON EFCS MOSFET pre-installed, giving the AEG an astonishing trigger response and rate of fire thanks to the improvements in electrical efficiency along with the ability to program the fire controls for burst modes, binary trigger and trigger sensitivity. These features are usually only found in AEGs twice this price! While it shoots like a dream, the AX//15 looks even better, with immaculately engraved Aeroknox trademarks across the design, flawlessly machined metal components and strong high density polymer furniture.

While high-end AR AEGs with interesting looks are a pound a penny these days, the AX//15's combination of slick ergonomics, gorgeous looks, phenomenal performance and great value for money make it a Patrol Base favourite. Make sure you get yours before we buy them all for ourselves!

A mountable RIS / RAS rail raiser which allows the user to increase the height at which their Sights and attachments sit to bring them to the correct height. 

This Hybrid Magazine Pouch is designed for AR/M4 Platform Magazines, is compatible with MOLLE/Buckle Up systems and offers the user either an Open Top or Closed Top configuration This allows you to the run the pouch with either a velcro flap securing the Magazines in place, or an elastic retainer for fast removal of mags.