EU Warehouse Stock

The 8Fields Tactical 10L Multi-Purpose Backpack is a tactical and compact Rucksack made from 1000D Nylon, which can be worn via the Dual Shoulder Straps or mounted to a Chest Rig or Plate Carrier via the MOLLE Straps. This, combined with the spacious 10L main compartment makes for the ultimate stylish Airsoft and everyday-use backpack. 

Made from 1000D Polyester with a water-resistant PU finish, this multipurpose bag is compatible with hydration bladders thanks to its internal hook, hydration hose route and hose retainers on each of the dual shoulder straps. Each shoulder strap also features a polymer D-ring for carrying extra kit with carabiners and a sternum strap to distribute weight more effectively for improved comfort. 

A fully adjustable mesh lower face mask with a hard armour foam layer which not only makes this mask look amazing, but reduces the likelihood of shattered rounds making their way through the mesh.

So you've got your gun bag, but how do you carry your rig, mags, helmet, belt kit, tools, batteries, gas and BBs? A range bag is what you need! The 8Fields Tactical Universal Range Bag 3.0 is constructed from 1000D Polyester fabric and is small enough to be easily portable but large enough to fit a lightweight loadout all in a single bag. 

Both on the inside and the outside, the Universal Range Bag 3.0 has plenty of pockets for your smaller valuables and skirmish accessories and the main compartment is nice and large; big enough to take most full face masks, micro chest rigs and even a small RIF. Whether you need a bag to transport your skirmish essentials and gear or you want an all-in-one super portable CQB loadout, the 8Fields Tactical Universal Range Bag 3.0 is ideal! 

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

A lightweight and tough sliding stock constructed from Polymer, that is designed for M4/15/16 AEG buffer tubes. The stock is based around the patented 'trigger style stock lever' which is incredible easy to use, and adjustments of stock length are quick and precise.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

Get into Airsoft skirmishing with a modern tactical variant of the world renowned and iconic AK47.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

The CM.028A comes with some tactical upgrades such as 20mm RIS/RAS railed handguard and threaded barrel to attach your favourite accessories.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box..

For those of you starting out in Airsoft skirmishing the CM.126 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to quickly switch to a backup. 

Ready to go out of the box, this electric Airsoft 6mm BB gun gets you straight into battle, and even features an adjustable Hop-up.

With an alloy mock slide and polymer frame construction, the CM.126 is lightweight and efficient at both semi and full automatic, this pistol has everything you need to get you on the field.

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

This gas-powered Airsoft Shotgun is a super tactical variant of the Golden Eagle Type 870 series, and offers 3rnd and 6rnd shot modes. With an Internal Gas Tank in the Buffer Tube, this Shotgun can be filled up on the fly, and is one of the most realistic Gas Shotguns you can get at the moment, without choosing a shell ejecting model.

If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news! 

The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

An ULTRA lightweight, compact and super low profile chest rig for the Oscar Mike Operator! Decorated in a full coverage MOLLE webbing and removable shoulder straps, this rig is a great grab for any player looking to tactically-prance their way into enemy territory.

All the functionality you can imagine and more! 8Fields Tactical are really living up to their name, bringing you a fully modular design, with a host of velcro retention attachments including pistol, rifle mag and shell retention loops that can be assigned to wherever suits you best.

Dual Glove-Friendly Zips keep the pouch safe and secured, again with inner Velcro lining to keep your loadout organised.

A serious pouch for some serious skirmishing.

If you want one MOLLE front panel to handle all missions, the MOLLE Multi-Mission Front Panel is what you need. This MOLLE-mounted front placard is designed to be mounted to the front of plate carrier vests but can also be mounted to chest rigs, backpacks and anything else with MOLLE compatibility.

The panel is constructed from 1000D Nylon, boasting high stitch density for durability and features a wide variety of open-topped magazine pouches with adjustable elastic retainers at the top for security. If your mission requires a mix of shotgun shells, rifle magazines, pistol magazines and other kit, this front panel is ideal for your setup.

If you want one MOLLE front panel to handle all missions, the MOLLE Multi-Mission Front Panel is what you need. This MOLLE-mounted front placard is designed to be mounted to the front of plate carrier vests but can also be mounted to chest rigs, backpacks and anything else with MOLLE compatibility.

The panel is constructed from 1000D Nylon, boasting high stitch density for durability and features a wide variety of open-topped magazine pouches with adjustable elastic retainers at the top for security. If your mission requires a mix of shotgun shells, rifle magazines, pistol magazines and other kit, this front panel is ideal for your setup.

If you are rocking the EC-202, EC-203 or EC-204 you will need some mags to keep it doing what it does best. The East Crane 110rnd Mid-Cap Magazine for EC-202/203/204 AEG is constructed with a transparent polymer shell and a steel feed spring, showcasing detailed mock 7.62x51mm cartridges inside for that realistic look. This mag is compatible with the EC-202, EC-203 and EC-204 AEG series but will not fit other 417-style Airsoft guns. 

This is a mid-cap magazine, meaning it is loaded through the fill/feed port at the top of the mag using a speed loader or loading rod. Thanks to its spring-loaded design you will never experience the dreaded battle rattle while carrying this mag, making it great for milsim skirmishers and those who prioritise stealth!

A large rifle case designed for up to two Airsoft Weapons, and is fully adjustable to suit a range of weapon types. 

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Ballistic Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If sniping is your skirmish role and you want something that isn't an L96 or VSR platform as your primary, the AGM Dragunov SVD will give you the unique rifle you need! This Dragunov SVD replica is a single-shot straight pull bolt action, meaning it falls within the same rules as a standard sniper rifle but with the uniquely iconic look of the bad guy sniper rifle. With full metal on the outside and your choice of high-density polymer or stunning real wood furniture, from a looks standpoint, this SVD ticks all the boxes!

On the inside, we are treated to a 6.02mm tightbore inner barrel measuring a whopping 600mm in overall length, meaning superb accuracy and range potential, if you do your part. The main spring puts out approximately 385 FPS +/- 10% on a 0.2g BB but if you need more, this is easily done thanks to the SVD's compatibility with standard AEG main springs. The HOP-up unit is of the much-lauded TDC design, adjusting via a grub screw with direct pressure applied to the HOP-up rubber for less side-to-side deviation and a stronger overall HOP-up effect. As an affordable way to dip your toes into the world of Airsoft sniping or as the base gun for a beast of a build, the AGM Dragunov SVD is a great choice!

The Double Eagle M904H is a lightweight but extremely effective Airsoft Electric Gun, powered by a Battery in the Stock. It is based around the 'Falcon Fire Control System' which offers a highly programmable and incredibly well-responding Trigger. If you're a fan of staying light on your feet, flanking the enemy and generally causing mayhem, this Airsoft Gun will do you proud on the skirmish field.

A high quality 11.1V LiPo battery with a 1200mAh capacity and Dean connector, suitable for both Airsoft, RC and more.

A high quality AUG Bullpup rifle delivering crisp shot after shot action. With a quick change spring gearbox and enough rails for all your accessories, you can go hit the field with reliability and consistency all day long.

A highly useful and well-constructed 45 degree rail piece for 20mm rails, useful for getting your accessories in just the right place for you.

If you are working on your CQB build you must be looking for the shortest barrel out there, and right now, this is it! The 5KU 7" Aluminium Outer Barrel For M4/AR-15 AEG is compatible with most M4/AR-15 AEGs and is constructed from aluminium for a perfect balance between low weight and high strength. 

The barrel is threaded at the tip with common 14mm CCW male threading, meaning you can mount the most common muzzle devices on the market with ease, including tracer units, suppressors and flash hiders in various styles. Also present are grooves in the underside to allow a gas block or M4/AR-15 triangular front iron sights to be mounted, though this is not essential. If you need your M4 to be shorter this will get you halfway there, but don't forget you'll need a shorter inner barrel too! 

Whether you are a pump action shotgun fan or you fancy a change of pace for CQB, the CM.370M M1014 M4 Super 90 Full Stock will be an asset to your game, if you have the skills that is! This shotgun is built on the proven Tokyo Marui tri-shot design but boasts full metal construction to make it more realistically weighted with the cold, means business feel of metal in the hands.

If you are building a British Army or USMC loadout, this shotgun is ideal to throw on a sling and keep handy for close encounters, especially if you are the type that is through the door first, leading from the vanguard. Whether you are a CQB specialist or you want a realistic shotgun secondary to enhance your loadout, the CYMA CM.370M is a great choice!

This Gas Blowback Airsoft Pistol is a hybrid of the 1911 and Hi-Capa platform to create a beautiful and well-performing sidearm which looks the business and can compete with the big boys. The pistol features a unique Compensator, as well as a Custom Stippled Grip and 20mm Accessory Rail, and has a huge double stack Magazine to give you the biggest gas capacity possible.

This Gas Blowback Airsoft Pistol is a hybrid of the 1911 and Hi-Capa platform to create a beautiful and well-performing sidearm which looks the business and can compete with the big boys. The pistol features a unique Compensator, as well as a Custom Stippled Grip and 20mm Accessory Rail, and has a huge double stack Magazine to give you the biggest gas capacity possible.

If you are looking for a sidearm which fits in well with a WW2-themed loadout you will struggle to find a more iconic option than the P08 Luger. This instantly recognisable German pistol was mass issued to the Imperial German Army throughout WW1 and also to the German Wehrmacht of WW2, and was produced between 1898 and 1949. The KWC Airsoft P08 is constructed entirely from metal and sports a fully functional gas blowback toggle locked action, and is fuelled by 12g CO2 capsules to provide forceful recoil and an immersive firing experience. With each shot, the toggle will lift as the pistol cycles and return to place, just like the real thing. For some old-school cool, you can't beat a Luger!

Designed and manufactured specially for Airsoft by APS, this 6mm BB Airsoft AEG is purpose built as a practical and user-friendly AEG, featuring fully ambidextrous controls in an ergonomic bullpup chassis.