NUPROL 7.4v 1450mAh 30c Crane Stock LiPo Battery

NUPROL
Code: 8054
179.00 kr.

Buy more and Save on Nuprol Batteries!

Buy 2+ 139.00 kr. per unit
Buy 3+ 139.00 kr. per unit
  • 1450mAh
  • 30c Rating
  • 7.4v 2S LiPo

A LiPo Crane Stock battery designed to fit in stocks and small spaces which other large batteries do not fit. The battery is also know as a Nunchuck battery, with the cells connected via the wires allowing them to be placed down the side of barrels or in an M4 Crane Stock.

Full description

Help
Size guide

Charge this battery the right way...

Description

The battery is also know as a Nunchuck or Butterfly battery, and the cells are connected via the wires allowing them to be placed down the side of barrels or in an M4 Crane Stock. The battery supplies 7.4v and 1450mAh of current, making it great for almost all airsoft weapons. These types of batteries can also be used in remote control cars, boats, planes and other toys, as well as in DIY electronics projects.

Features

  • Part of NUPROL's Power Range
  • 7.4v LiPo
  • 1450mAh Rating
  • 30c 43A Rating
  • 60c 87A Burst Rating
  • 2 x cells
  • 9cm cable
  • Approx. 11.5cm x 0.7cm x 1.5cm

Package Includes

  • 7.4v 1450mAh 30c Crane Stock LiPo Battery
  • Instruction Manual

Special Instructions

When using your LiPo battery ensure that it does not fully discharge, otherwise you may damage or destroy your battery, if you feel that your rate of fire is decreasing then stop using your battery immediately. Battery levels can be checked by plugging a LiPo Alarm into your battery.

Safety Precautions:

Never leave Li-Po charging unattended - Always monitor the charging process of your Li-Po so that you can react immediately to any potential problems. If your batteries start to balloon or swell up discontinue charging / discharging. Before and after the use of your Li-Po batteries, inspect them to ensure there is no physical damage or swelling as those are signs of an imminent failure. 

Only use approved Li-Po chargers. Do not pierce or disassemble the battery. The charging current should not be ore than 1.0c as charging at a higher current may damage the cell or even lead to overheating or leakage. Stop charging immediately when temperature is over 45°C, and stop using the battery once the temperature is over 60°C.

We recommend that all LiPo batteries be charged in a fire resistant location, and inside a Fire Proof bag, such as the VP Racing Battery Giant Power LI-PO GUARD Charging Bag.

Specification

General

Parts & Accessories Type
Battery
Product Length
Approx. 11.5cm
Product Height
Approx. 1.3cm
Product Width
Approx. 1.5cm
Patrol Base - Warning Icon
 Warnings
Li-Po - Never Leave Charging Unattended
Li-Po - Only Use Approved Chargers
Li-Po - Charge in a Fire Safe Area

Battery Specification

Battery Type
Li-Po
Battery Configuration
Crane
Battery Connector
Patrol Base | Icon | Mini Tamiya
 Mini Tamiya
Battery Voltage
7.4V
Battery Amperage
1450mAh
Battery Discharge Rate
30
Battery Cell Count
2
Battery Cell Voltage
3.7V
Battery Cell Height
0.7cm
Battery Wire Length
9cm

Size guide

Airsoft Battery should only be charged with the chargers as they are specifically designed to work with the specific voltages required by the battery.

Different battery types have different chemical configurations, and require certain chargers to charge them. Charging a battery with the wrong charger can cause damage to the battery and charger, and can cause fires and further damage. Please ensure that before charging you double check that you are using the correct charger.

If your charger supports multiple battery types always ensure that it is on the correct settings before starting the charge.

We always recommend charging LiPos and other batteries in a charging bag.

If you are unsure of what battery or charger you have please get in touch with us via the Contact Us Page.