All Airsoft Guns

If you have your sights set on an M4/AR-15 AEG with plenty of accessory options in the perfect length for both indoor and outdoor skirmishes, the DA-B11 BRAVO™ from Delta Armory is a solid choice. BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. 

Externally, the DA-B11 boasts a great combination of 20mm Picatinny rails and M-LOK negative space attachment slots, giving you access to prolific 20mm Picatinny attachments as well as the latest bits for M-LOK systems. The barrel is 14.5 inches long, giving you a great mid-length platform ideal for a mix of CQB and outdoor scenarios. At the rear, we are treated to the superb Delta Armory battery stock, a comfortable and well-designed stock with built-in sling points and a decent-sized battery compartment ideal for LiPo batteries. 

Inside the DA-B11, we are treated to some thoughtful internal upgrades to extend the platform's lifespan and enhance performance. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, the steel 18:1 gearset runs on 7mm ball-bearing bushings and SHS provides the piston and tappet plate, a brand known for hard-wearing upgrade parts. Whether this will be your first AEG or a backup to a heavier full metal primary, you can't go wrong with the Delta Armory DA-B11!

The Double Eagle M924 DMP-9 Submachine Gun AEG; Kestrel V2 ETU is a perfect compact CQB SMG. With the addition of the Kestrel V2 ETU, this SMG means serious business! Its lightweight polymer construction is sure to withstand scratches and bumps and the side folding skeletonised stock allows you to turn this SMG into a single-handed machine pistol, not the traditional shooting stance but it works!

Inside the Double Eagle M924 DMP-9 Submachine Gun AEG; Kestrel V2 ETU, we are treated to some reliable straight-out-of-the-box internals. Featuring the star of the show, the Kestrel V2 programmable ETU, paired with 18:1 ratio steel gears which run on 8mm ball-bearing bushings. Also inside is a 6.04mm inner barrel paired with a rotary HOP-up unit, getting you off the mark with some fine accuracy potential.

The tactical option for MP5 lovers far and wide; whether you want to attach the included foregrip or your own optics, torches, lasers this Airsoft 6mm electric powered replica has you covered.

If you like your M4 AEGs simple and effective, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG should be right up your street! Based on the real steel M4A1 in CQB-R configuration, this M4/AR-15 AEG is rocking a 10.5-inch outer barrel, putting it in that sweet spot, with enough barrel length to handle long-range threats while not being too long for close-quarters combat. 

The DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is constructed with strong high-density polymer receivers and an aluminium handguard, making it perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. Inside, we are treated to rock solid, pre-upgraded internals featuring a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate. The inner barrel is a 6.03mm tightbore paired with a rotary HOP-up unit, giving you the most modern HOP-up unit style for the M4 AEG platform with superb accuracy potential when adjusted. 

If you're fresh to the game and want to start with something a cut above the bare-bones beginner AEG with almost unlimited aftermarket compatibility and the ability to style it up to the nines, the Delta Armory DA-B01 BRAVO™ CQB-R M4/AR-15 AEG is ideal for you!

If you like the deadly, snub-nosed look of an integrally suppressed AR platform but want a shape less seen, the Delta Armory DA-B09 BRAVO™ Silent Ops Classic M4/AR-15 AEG should be right up your street. This is Delta's "Classic" version of the Silent Ops 7, boasting a CNC machined aluminium handguard with a wider-than-usual design to bring more realism to the sneaky beaky AR. 

The handguard is free-floated and includes a 20mm Picatinny rail extension at the top, designed to bridge the gap between the receiver and handguard rails for a more integral look and to allow for larger optical sights. If you ask us, this is how the original should have been, setting the Silent Ops apart from other similar integrally suppressed M4 AEGs. Inside the DA-B09, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a rotary HOP-up unit, 6.03mm tightbore inner barrel, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. 

For stealthy skirmishers who want a more unique look, the Delta Armory DA-B09 BRAVO™ Silent Ops Classic M4/AR-15 AEG will give you exactly that. With pre-upgraded internals focussed on reliability and a unique front-end style to separate it from the masses, the Silent Ops Classic is a mean machine ready for any skirmish scenario you put it in!

An Airsoft 6mm BB Gun, designed in a bullpup configuration, based off the Austrian Steyr AUG. The gun features an Alloy Front end, and Sight with Polymer Body and Foregrip.

This Gas Blowback Airsoft Pistol is based on the Hi-Capa Platform, and features a Split Slide for an amazing Trigger Response and awesome Gas Efficiency. If you're looking to step up your Pistol game, and you want to be sending more accurate and responsive shots, you need to pick up a Split Slide model like the Vorsk Hi-Capa 5.1 Split Slide.

An Airsoft 6mm BB firing electric AEG designed in the style of the MP5 used by Special Forces around the world. Featuring a lightweight and durable Polymer external construction, this a RIF for those who like to stay light and fast on their feet.

If you like the iconic M4A1 shape but want more ergonomic furniture, the Delta Armory DA-B02 BRAVO™ RIS M4/AR-15 AEG should suit you perfectly! The DA-B02 is based on the real steel US Army-issued M4A1 rifle but is rocking the Delta Armory modernised receiver, Delta battery stock and "gunfighter mod.3" style ergonomic pistol grip, giving it a touch of modern comfort to go with its classic militant aesthetic. 

Being an AEG of the Delta Armory BRAVO™ line, the DA-B02 combines the high-density polymer receiver and buffer tube of the CHARLIE™ line with a CNC aluminium handguard and alloy outer barrel. This gives the platform more realistic weight distribution and an extra hint of realism without compromising the platform's agility.

Internally, the DA-B02 is well equipped with pre-upgraded internals focused on longevity and reliability straight out of the box. These include a reinforced gearbox shell, a piston with a full steel tooth rack and tappet plate from SHS and a quick change ball-bearing spring guide. A 6.03mm tightbore inner barrel paired with a rotary HOP-up unit is also present, intended to enhance long-range effectiveness and accuracy potential. Whether you're putting together a casual US Army-style loadout or need a lightweight platform to improve your in game agility, the DA-B02 BRAVO™ RIS M4/AR-15 AEG makes a fine primary!

If you like the iconic M4A1 shape but want more ergonomic furniture, the Delta Armory DA-B02 BRAVO™ RIS M4/AR-15 AEG should suit you perfectly! The DA-B02 is based on the real steel US Army-issued M4A1 rifle but is rocking the Delta Armory modernised receiver, Delta battery stock and "gunfighter mod.3" style ergonomic pistol grip, giving it a touch of modern comfort to go with its classic militant aesthetic. 

Being an AEG of the Delta Armory BRAVO™ line, the DA-B02 combines the high-density polymer receiver and buffer tube of the CHARLIE™ line with a CNC aluminium handguard and alloy outer barrel. This gives the platform more realistic weight distribution and an extra hint of realism without compromising the platform's agility.

Internally, the DA-B02 is well equipped with pre-upgraded internals focused on longevity and reliability straight out of the box. These include a reinforced gearbox shell, a piston with a full steel tooth rack and tappet plate from SHS and a quick change ball-bearing spring guide. A 6.03mm tightbore inner barrel paired with a rotary HOP-up unit is also present, intended to enhance long-range effectiveness and accuracy potential. Whether you're putting together a casual US Army-style loadout or need a lightweight platform to improve your in game agility, the DA-B02 BRAVO™ RIS M4/AR-15 AEG makes a fine primary!

Those looking for an affordable AEG they'll never need to upgrade, the Delta Armory DA-DIA-ARENA-A14 Diamond ALPHA™ 10" M-LOK M4/AR-15 AEG is exactly that! Building on the already very impressive Delta ETU series rocking ALPHA™ full metal externals, the Diamond 10" M-LOK M4/AR-15 is the top-of-the-line option from Delta, boasting a few internal changes from the original ETU version to refine 

The best parts of the ETU series are present in this Diamond AEG, including a reinforced gearbox shell, a programmable ETU/MOSFET system, a CNC aluminium cylinder head, CNC steel 16:1 gears and a high torque neodymium magnet motor to deliver the torque needed for a lightning-fast trigger response. 

The Diamond adds an AOE correcting rubber washer, a POM piston head made in the Czech Republic, an upgraded tappet plate spring, 8mm stainless steel ball-bearing bushings and the incredible Delta Armory Berserker Flat HOP-up kit, made by Psionics of Italy. The Berserker kit includes an enhanced HOP-up arm, flat nub and bucking optimised for maximum range, all made by HOP-up legends Psionics, true masters of the HOP-up game. 

The result is a Delta Armory AEG at the top of its game, running smooth as butter and reaching out to very impressive ranges. If you aren't the type of Airsofter to buy a gun and upgrade it over time, get stuck in with the DA-DIA-ARENA-A14 ALPHA™ Diamond 10" M-LOK M4/AR-15 AEG and you won't look back!

This is not an AK, I repeat this is not an AK variant! It may share some silhouette similarities but the VZ.58 is a unique platform that was the standard service rifle for the Slovakian military from 1959 to 1984. This Delta Armory replica is licensed by the Real Steel Firearms company Czech Small Arms which is the only manufacturer of SA VZ.58 rifles. The DA-VZ58 is based on the SA VZ.58 Sporter Carbine except with a longer outer barrel. The trademarks to indicate this can be found on the AEG.

Internally, the Delta Armory DA-VZ58 CSA VZ.58 "Kosa" AEG features some of the high-quality pre-upgraded Delta Armory internals such as an EFCS programmable MOSFET 18:1 ratio steel gears, a quick change spring system, a unique gearbox design and a high torque motor. The EFCS MOSFET allows the fire modes to be reprogrammed for burst modes and semi-auto only using the Ares EFCS programmer (available separately) and also features a low-voltage cutoff function, protecting your battery from being damaged if the voltage drops too low.

If you're working on a US Army loadout and need a primary to complete it, the Delta Armory M4A1 US Army ALPHA™ Pro Pack was made with you in mind! This bundle includes the DA-A02-ETU M4A1 RAS, a PCS ACOG Red Dot Sight, a WADSN PEQ15 Red Laser/White Light module, 2 extra Mid-cap magazines and an 8Fields Tactical Simple Rifle Case, giving you an M4A1 setup which perfectly matches the US Army issue M4A1 rifle. 

The DA-A02-ETU is one of Delta's top platforms, rocking a full metal build, a pre-installed programmable MOSFET/ETU, 16:1 ratio high-speed gears and a high torque motor to top it off. When kitted out US Army style with a couple of spare mags and a gun bag along with a sweet discount, this beast gets even better!

If you're in search of a new CQB platform or a compact PDW-style AR for your quick and slick playstyle, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG should be high on your list of options. This full-metal M4 platform boasts an extremely compact front end, ideal for close-quarters skirmishes or woodland warriors who prefer to move fast with a bite-sized M4 with full-sized firepower. 

Being an AEG of the ALPHA™ range, this beast boasts pre-upgraded internals and a high-quality metal receiver paired with a  CNC aluminium handguard and micro suppressor. Inside, you will find a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness despite its short overall length. 

If your aim is to refute the "size matters" philosophy and prove it truly is how you use it, the Delta Armory DA-A03 ALPHA™ SilentOps CQB M4/AR-15 AEG is the perfect AEG to do it!

Whether you're new to the game and looking to start out with a full metal platform bristling with advanced features or a veteran skirmisher in search of an M4 AEG you can just pick up and go with, the Delta Armory DA-A06 ALPHA™ KeyMod 10" M4/AR-15 AEG is a fine choice. A realistically hefty full metal build with a cutting-edge aesthetic at just the right length to do its dirty work both outdoors and in CQB, the DA-A06 ALPHA™ is ready for any challenge that faces it. 

Equipped with a KeyMod handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out with SHS reinforced parts and a 6.03mm tightbore inner barrel the DA-A06 ALPHA™ is an extremely competitive platform, both on price and performance!

If you're after a new M4 AEG but don't like to commit to a particular build direction, the DA-A06 won't make any decisions for you! Thanks to the modularity of the AR platform and the DA-A06 ALPHA™ 10" KeyMod M4/AR-15 AEG is ready to accept a full complement of accessories, kitted out just how you desire and give the enemy team the what for when it comes to skirmish day!

If you're a stealthy skirmisher seeking a platform to match, the Delta Armory DA-B07 BRAVO™ Silent Ops 7 M4/AR-15 AEG is ideal. A familiar shape to most, this integrally suppressed M4/AR-15 AEG is built to Delta Armory BRAVO™ standards, with a CNC aluminium handguard, aluminium suppressor and alloy outer barrel, elevating realism and build quality dramatically when compared to similar-looking platforms from other brands. 

Inside, we are equipped with the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. The inner barrel also extends through the suppressor and is a 6.03mm tightbore, offering improved accuracy potential and a slight FPS boost from the same power spring. 

If you like to move fast and fight easy but need an aluminium handguard to quieten your realism urges, the Delta Armory DA-B07 BRAVO™ Silent Ops 7 M4/AR-15 AEG is a fine choice. At about the perfect length to handle any engagement distance and respectable pre-upgraded for reliability out of the box, the DA-B07 is a great starter platform and makes a fantastic backup for veteran skirmishers!

If a full metal AR PDW will be your next buy, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG definately deserves your attention! Rocking full metal ALPHA™ standard externals on the outside and some seriously slick technology internally, the TALOS 1 is a mean CQB machine ideal for cutting tight corners up close and personal. 

Inside, the TALOS 1 is equipped with Delta's EAGLE™ programmable MOSFET/ETU, offering a boost in trigger response and rate of fire along with programmable fire controls. Available fire modes include 3 or 5-round burst mode, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you almost too many options all of which can be programmed using the fire controls of the AEG itself. Also inside is a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, giving the TALOS 1 far more long-range effect on target than one might expect!

Whether you specialise in CQB or prefer a short platform for aggressive outdoor play, the Delta Armory DA-A16-EGL ALPHA™ TALOS 1 PDW M4/AR-15 AEG will be an asset to your battlefield role. Dressed to impress on the outside with all the latest attachment interfaces, the TALOS 1 is a force to contend with; kit it out and get busy!

If you are a lover of classic assault rifles, you will have noticed the absence of this Swiss beauty in AEG form, especially in full metal AEG form. An oft-forgotten platform, the S-55x series are a great alternative to the wealth of AR15s and AKs used by the vast majority of skirmishers. Take the JG S-551 to a Airsoft site and you will turn heads, then when you start shooting you will turn tails!

If you love an unconventional primary, the LCT LK33A3 AEG is one to watch! An extremely realistic Airsoft Electric Gun, powered by a Battery in the Handguard, this AEG replicates the big brother of the legendary MP5, used by a multitude of armed forces around the world. Made from Alloy, Aluminium, Steel and Nylon Fibre, this is one for those who appreciate 'old-school' aesthetic and maximum realism in an incredibly tough steel body with a fantastic finish!

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

If you're just getting into Airsoft and need a simple, affordable and effective platform to get stuck in with, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is one to watch. This M4/AR-15 platform AEG is made predominantly from high density polymer with alloy and steel trim parts, keeping the build lightweight, agile and easy to move with.

Though it may be mostly polymer, this isn't the usual shiny "super-soaker" tier stuff; this is nylon fibre-reinforced polymer, the kind that may well outlast alloy when it comes to endurance. Inside, we are equipped with an alloy version 2 gearbox with 18:1 ratio steel gears running on 8mm ball bearing bushings and driven by a 21K RPM high torque motor; a competitive feature set for a platform at this price!

The inner barrel is also a 6.03mm tightbore paired with a 50° HOP-up bucking and rotary HOP-up unit, ensuring you can reach out and engage at longer ranges, even in the short 8.5" barrelled / 7" handguard model. If you need an affordable, solid primary based around proven internals with plenty of accessory compatibility, the NUPROL Delta Pioneer Nomad M4/AR-15 AEG is ideal!

If you're new to Airsoft and want to start with something a bit more advanced than the average M4, the Delta Armory DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG should suit your needs! This M4 CQBR AEG is constructed primarily from high-density polymer, just like the original DA-C02, but unlike the original, this version is rocking the ALPHA™ ETU series internals, flawlessly marrying a lightweight and agile build with a lightening fast trigger response and the ability to program the trigger for binary trigger or burst mode. 

The ETU isn't the only thing added to the DA-C02-ETU; we are also treated to 16:1 ratio CNC steel gears, CNC aluminium cylinder group parts, a 6.03mm tightbore inner barrel with a high torque Neodymium magnet motor to top it off. The result is a surprising trigger response and intense rate of fire, usually reserved for AEGs twice this price! If you want all of the performance but none of the weight of the Delta Armory ALPHA ETU series, the DA-C02-ETU CHARLIE™ M4/AR-15 CQBR AEG provides exactly that!

If you're a CQB specialist or a fast-moving outdoors skirmisher seeking an M4 platform with a sneaky aesthetic, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG is one to watch. Being an AEG of Delta's ALPHA™ line, this beast boasts a CNC aluminium quad-rail handguard, aluminium suppressor and the unique Delta Armory billet-style receiver, giving it a cutting-edge, brutal look with plenty of accessory options built in. 

Inside, you will find the usual complement of Delta Armory pre-upgraded internals, including a reinforced V2 gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. The 18:1 ratio steel gearset runs on 7mm ball bearing bushings, reducing gearbox noise and friction. 

Focussing on long-term reliability, the DA-A04's internals are well suited to new skirmishers or experienced Airsofters looking for a reliable backup or starting point for a custom build. If this sounds like you, the Delta Armory DA-A04 ALPHA™ Silent Ops 8 M4/AR-15 AEG will serve you well!